Plese399ecd Parts

Ordered a new clock/timer control. This was very easy to install the real trick was removing about 8 wires and 4 plug in connectors from the board and then reinstalling them back in the same location as the were before. I took a photo of the board with my IPhone before taking all the wires off, this made it very easy to reinstall the wires on the same terminals as before. There are 2 additional connectors on the board that a flat ribbon cable from the touch button panel attaches to. Do not just... Read more

I tested the temp probe first and found resistance to be ok at 1088 ohms (spec is 1000 to 1100 ohms) so that pointed to the control board being faulty. The board was easy enough to replace and took about 15 minutes to do. Disconnect the plug or throw circuit breaker to off. Use gloves to guard against sharp metal edges. Remove all four control knobs by simply pulling on them. Then unscrew the four black plastic nuts holding the control panel assembly in place. Flip panel forward then... Read more

I bought replacement hinges and installed them myself. The hardest part of the job was the first part: to remove the oven door you have to lock the old hinges with small brackets, and one side did not want to lock--I had to use a hammer. The door was heavier than it looks, but the only challenge after that was the fact that the edges of the door parts were sharp. I probably should have worn gloves when handling them. You have to take the door apart to insert the new hinges, but it's just... Read more

Followed the video that was on the site. Almost as easy, except mine didn't have a terminal block, just individual lugs. The lugs were a little tight, guess so as they have been on for over 17 years. Took one off at a time and put it on the new switch. With needed floor cleaning, the task only took about 20 minutes. I selected basic delivery and it took almost 10 days. They could have shipped it USPS for faster service, as it only weighed 1/2 lb. Read more