Psc23mgtdcc Parts

This foam insulation wraps the refrigerator's water reservoir to reduce sweating and help prevent freezing, keeping dispenser flow consistent and the fresh food compartment dry. Replace if the original insulation is torn, crushed, or missing. What it does:

• Insulates the water reservoir to help maintain a stable temperature
• Helps prevent the reservoir from freezing, which can slow or stop dispenser flow
• Reduces condensation that can drip or puddle inside the refrigerator
• Restores proper cushioning and protection around the tank

• 1 foam insulation piece for the water tank

• Unplug the refrigerator and shut off the water supply before servicing
• Remove shelves/drawers to access the water reservoir area
• Carefully remove the old insulation; avoid stressing or puncturing the reservoir and tubing
• Fit the new foam snugly around the tank, reassemble, restore power/water, and check for leaks and dispenser flow

This is a refrigerator ice and water dispenser drip tray located on the freezer door. Color: White. It measures about 8 inches wide by 4 inches deep. For black order WR17X11655.

Lamp 40w chill

For the same part in black, purchase WR02X13425.

Includes 12 washers.

A small metal retainer spring that secures trim and lightweight components so panels and shelves stay aligned and do not rattle. Replaces a worn or broken spring to restore a snug, reliable fit. What it does

• Holds trim, panels or lightweight components in position to prevent sagging or separation
• Stops rattling and vibration caused by loose parts
• Restores correct alignment of removable trim or small assemblies
• Helps maintain proper component engagement during normal use

• One retainer spring

• Disconnect power (unplug or switch off circuit) before working on appliances
• Use basic hand tools; access may require removing adjacent trim or clips
• Handle spring and surrounding trim carefully to avoid scratches or damage
• Replace damaged or missing mounting hardware before reassembly

This cam closure is the small plastic latch that helps the freezer door align and stay closed, restoring a tight seal for efficient cooling and preventing frost buildup. Fits the freezer door hinge area and replaces worn or broken closures. What it does:

• Guides and secures the freezer door into the closed position for a reliable seal
• Replaces broken, cracked, or missing cam closures that let the door sag or catch
• Helps reduce air leaks that can cause frost buildup or higher energy use
• Works with the freezer hinge/cam assembly to maintain proper door alignment

• Disconnect power before working on the refrigerator to avoid electrical or injury risk.
• Remove the freezer door or inner liner panels as required to access the cam closure; follow the refrigerator model service manual.
• Install the cam in the correct orientation and ensure smooth door movement and alignment before reassembly.
• If hinges, screws, or adjacent parts are damaged, inspect/replace those parts as needed for a lasting repair.

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This Custom Cool tray is the refrigerator shelf insert that provides a flat, stable surface in the Custom Cool compartment and helps contain minor spills. It replaces a cracked, warped, or missing tray so refrigerated items sit level and clean. What it does:

• Provides a stable shelf surface in the refrigerator's Custom Cool compartment
• Helps contain small spills and prevents liquids from dripping onto lower compartments
• Restores proper fit and appearance when the original tray is cracked, warped, or broken
• Supports refrigerated items and small containers for safer storage

• One Custom Cool tray

• Disconnect power to the refrigerator before working on interior components
• Remove all items from the compartment and lift out the old tray; handle carefully to avoid cuts if cracked
• Align the replacement tray with the shelf guides and slide into place until fully seated
• Refer to the refrigerator owner's manual or manufacturer service instructions for model-specific guidance

This replacement insert module restores proper fit and support inside the appliance's FF assembly, helping secure components and reduce looseness. It's a direct-fit replacement designed to stop rattling and restore stable alignment. What it does:

• Secures and positions internal components in the FF assembly to maintain correct spacing and alignment
• Replaces cracked, broken or worn inserts that allow movement or vibration
• Helps eliminate rattling, knocking or loose-feeling parts caused by a failed insert
• Preserves intended part geometry so adjacent components mount correctly

• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Remove only the panels and fasteners specified in your model's service instructions to access the insert
• Handle plastic clips and tabs carefully to avoid breakage; replace any damaged fasteners
• Test fit and operation before reassembling all panels

This lower front trim piece attaches to the refrigerator base to cover and protect the grille area while keeping the appliance's front panel looking finished. It restores appearance and helps keep debris away from vents and components. What it does:

• Covers the lower front grille opening for a finished, OEM appearance
• Protects underlying vents and components from dust and accidental contact
• Helps direct airflow around the condenser/vent area for proper operation
• Replaces damaged, cracked, or missing trim to improve aesthetics

• One grille recess lower front trim

• Disconnect power to the refrigerator before attempting installation
• Typically secures with snap tabs and/or screws; align tabs and press or fasten as required
• Handle carefully to avoid scratching the finish and to prevent breakage of plastic tabs
• Obtain OEM replacements for secure installation

This slide and bracket assembly replaces a worn or broken refrigerator drawer slide to restore smooth opening and secure drawer support. Designed to align and guide the drawer while preventing sagging or binding. What it does:

• Replaces the drawer slide and mounting bracket so the drawer glides correctly
• Supports the weight of the drawer and its contents to prevent sagging
• Helps stop sticking, rough movement, or misalignment when opening/closing the drawer
• Restores proper drawer tracking for full insertion and removal

• One slide and bracket assembly

• Intended for refrigerator drawer application; verify fit against your OEM part number before ordering
• Basic hand tools required; follow manufacturer's service manual for access and removal steps
• Disconnect power or unplug the appliance if accessing electrical components nearby
• If fasteners or clips are damaged, replace them with OEM-specified hardware

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This hinge top and pin assembly secures the refrigerator/freezer door to the cabinet and provides a stable pivot for smooth opening and closing. It helps keep the door aligned and prevents sagging or uneven gaps. What it does:

• Replaces a worn or broken hinge top and pivot pin that allow the door to pivot
• Restores proper door alignment and sealing when the hinge is the cause of sagging
• Stops noisy or sticky door movement caused by a damaged hinge top or pin
• Helps prevent further wear to the door and cabinet by restoring correct pivoting

• One hinge top and pivot pin assembly

• Support the door securely before removing the hinge to prevent injury or damage
• Disconnect power to appliances with electrical components before working near them
• Tighten mounting fasteners to manufacturer torque recommendations; do not overtighten

This auger helix is the rotating spiral that moves ice from the freezer bin to the dispenser chute, restoring reliable ice delivery when the auger is worn, broken, or missing. Designed to match OEM fit and function. What it does:

• Translates motor rotation into axial movement to push ice through the dispenser chute
• Restores consistent ice flow when previous helix was stripped, cracked, or bent
• Reduces jamming and grinding caused by damaged or worn flights
• Works with the dispenser auger assembly to ensure measured ice delivery

• One auger helix

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and dispenser auger housing per manufacturer instructions
• Inspect mating components and replace if damaged
• Do not force fit; align helix and test dispenser operation before reassembling