Pss26lgra Parts

This ice dispenser deflector mounts in the freezer door chute to guide cubes or crushed ice into your glass. Replace a cracked or missing deflector to reduce scatter and keep ice flowing where you want it.

• Directs ice down the dispenser chute toward the glass
• Helps contain spray and bounce-back of cubes
• Restores proper flow when the original deflector is cracked, warped, or missing
• Common symptoms: ice misses the glass, ice scatters on the floor, visible damage to the deflector

• Disconnect power to the refrigerator before servicing; wear cut-resistant gloves
• Access the dispenser area per your model's instructions and note the deflector's orientation
• Transfer any screws or clips from the old part; avoid forcing plastic tabs
• Restore power and test ice dispense to confirm proper direction and clearance

This foam insulation wraps the refrigerator's water reservoir to reduce sweating and help prevent freezing, keeping dispenser flow consistent and the fresh food compartment dry. Replace if the original insulation is torn, crushed, or missing. What it does:

• Insulates the water reservoir to help maintain a stable temperature
• Helps prevent the reservoir from freezing, which can slow or stop dispenser flow
• Reduces condensation that can drip or puddle inside the refrigerator
• Restores proper cushioning and protection around the tank

• 1 foam insulation piece for the water tank

• Unplug the refrigerator and shut off the water supply before servicing
• Remove shelves/drawers to access the water reservoir area
• Carefully remove the old insulation; avoid stressing or puncturing the reservoir and tubing
• Fit the new foam snugly around the tank, reassemble, restore power/water, and check for leaks and dispenser flow

This is a refrigerator ice and water dispenser drip tray located on the freezer door. Color: White. It measures about 8 inches wide by 4 inches deep. For black order WR17X11655.

This refrigerator pan frame assembly supports the shelf above a storage drawer and provides the tracks for the pan to slide. Replace it if the frame is cracked or warped, or if the drawer binds, sags, or falls.

• Supports the shelf insert above the drawer to keep items level and stable
• Provides the guides that let the pan/drawer open and close smoothly
• Maintains proper drawer alignment to prevent sticking or dropping
• Common failure signs: cracked or broken frame/tabs, sagging shelf, jammed or wobbly drawer

• Disconnect power and clear the shelf area before starting
• If your model uses a separate glass insert, remove it carefully before lifting the frame
• Release any retaining tabs and lift out the old frame; seat the new frame in the same orientation
• The drawer slides smoothly and the shelf is stable before reloading

This is a screw intended for use in refrigerators, specifically as the top mounting screw for the handle. If the screw in the handle is missing, stripped, or otherwise not performing its function, a replacement screw should be ordered.A visual inspection will determine if a screw is missing. If the door handle is loose or falling off from the top, it is a sign that a replacement screw is required. This repair is a quick and easy process. It involves the use of a screwdriver. Remove the old screw if there is one in place. Line up the holes on the door and the door handle component before twisting the new screw into position. Wear gloves to protect hands during the repair.This screw is a genuine OEM replacement part. It is sourced directly from the manufacturer. The screw is sold individually. The screw is compatible with several different models of refrigerators. It can be installed in ranges made by Electrolux, Frigidaire, Gibson, Westinghouse, and Kelvinator.

Includes 12 washers.

This cam closure is the small plastic latch that helps the freezer door align and stay closed, restoring a tight seal for efficient cooling and preventing frost buildup. Fits the freezer door hinge area and replaces worn or broken closures. What it does:

• Guides and secures the freezer door into the closed position for a reliable seal
• Replaces broken, cracked, or missing cam closures that let the door sag or catch
• Helps reduce air leaks that can cause frost buildup or higher energy use
• Works with the freezer hinge/cam assembly to maintain proper door alignment

• Disconnect power before working on the refrigerator to avoid electrical or injury risk.
• Remove the freezer door or inner liner panels as required to access the cam closure; follow the refrigerator model service manual.
• Install the cam in the correct orientation and ensure smooth door movement and alignment before reassembly.
• If hinges, screws, or adjacent parts are damaged, inspect/replace those parts as needed for a lasting repair.

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This rear gasket cover secures the refrigerator door gasket and helps maintain a clean seal at the back edge of the door. It restores proper gasket alignment and helps reduce air leaks and moisture buildup. What it does:

• Holds the rear edge of the door gasket in place for a consistent seal.
• Helps prevent cold air loss and condensation by keeping the gasket aligned.
• Reduces rubbing and wear on the gasket edge caused by movement.
• Commonly replaced when the cover is cracked, missing, or allows the gasket to pull loose.

• One rear gasket cover.

• Remove power to the appliance before beginning any work.
• Typically installs by snapping or sliding into the door gasket channel; inspect surrounding trim for damage.
• Use basic hand tools; avoid forcing the cover to prevent breaking the part or the door.
• If gasket damage is present, replace the gasket as needed to ensure a proper seal.

This lower front trim piece attaches to the refrigerator base to cover and protect the grille area while keeping the appliance's front panel looking finished. It restores appearance and helps keep debris away from vents and components. What it does:

• Covers the lower front grille opening for a finished, OEM appearance
• Protects underlying vents and components from dust and accidental contact
• Helps direct airflow around the condenser/vent area for proper operation
• Replaces damaged, cracked, or missing trim to improve aesthetics

• One grille recess lower front trim

• Disconnect power to the refrigerator before attempting installation
• Typically secures with snap tabs and/or screws; align tabs and press or fasten as required
• Handle carefully to avoid scratching the finish and to prevent breakage of plastic tabs
• Obtain OEM replacements for secure installation

This support slide holds and guides a refrigerator or freezer basket so it opens and closes smoothly, preventing sagging and keeping stored items accessible. It restores proper basket movement and alignment for safer, more reliable use. What it does

• Replaces a worn or broken slide that supports the basket and allows it to glide.
• Restores smooth in-and-out motion so the basket doesn't stick or bind.
• Prevents the basket from tipping or sagging when loaded.
• Helps reduce noise and uneven movement caused by damaged slides.

• Disconnect power to the appliance before starting any repair.
• Remove the basket or drawer to access the slide assembly; reinstall the slide in the same orientation.
• Align the slide with the mounting points and secure until it snaps/locks into place; verify smooth operation before returning items to the basket.
• Replace it with the correct OEM fasteners only.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This light reflector directs and protects the appliance lamp, improving illumination and preventing direct bulb contact. It restores proper light focus so interior areas are evenly lit and bulbs remain securely positioned. What it does:

• Reflects and directs light from the lamp for better interior visibility
• Shields the bulb from contact with food or components
• Helps maintain consistent light output and coverage
• Commonly replaced when light appears dim, uneven, or the reflector is cracked or missing

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove the bulb before installing the reflector; handle bulbs and reflector with care to avoid damage
• Use only compatible replacement parts and follow the appliance manufacturer's instructions