Ras 8244K Parts

Size: 21 inches long. Clamp included.

This white thermostat control knob fits the oven temperature control. It fits onto the thermostat shaft so you can select temperature settings. Replace a knob that is cracked, stripped, loose, or missing to restore normal control and a clean, matched look.

• Mounts to the oven thermostat shaft to select temperature settings
• Fixes issues like cracking, stripping, wobbling, or falling off
• Helps when markings are worn or the knob no longer turns the control
• Restores the original look of the control panel

• Turn all controls OFF and let the appliance cool before replacing the knob
• Align the flat/D-shaped shaft with the knob insert and press straight on—do not force
• Verify the pointer aligns with the panel's temperature markings
• If replacing multiple knobs, match each knob to its specific control

Includes drive tube spacer, "T" bearing and both shaft seals.

This brake release cam works with the washer's brake assembly to disengage the brake during spin and re-engage it at stop. Replacing a worn cam restores smooth basket spin and reduces squeal or grinding at spin transitions.

• Disengages the brake so the basket can spin; helps reapply the brake as the cycle ends
• Supports smooth starts and stops of the spin cycle
• Worn or damaged cams can cause no spin or intermittent spin
• Common symptoms include loud squeal/grinding at start/stop or a burning odor near the brake area

• Disconnect power (and water supply, if moving the washer) before service
• Access the brake/basket drive area; the brake spring is under tension—use caution and eye protection
• Note orientation of parts before removal; seat the new cam correctly
• After reassembly, run an empty spin test to verify operation

Used from harness to top.

This is a Whirlpool washer inner tub spin basket. The spin basket is the portion of the washing machine the clothes are held. This piece must operate efficiently for the items in the washer to be thoroughly cleaned. The main indicators of a damaged spin basket are the loss of the ability to spin or the washer making loud noises due to moving and rattling of the spin basket.Begin installing the new basket by unthreading the screws that fasten the top portion of the washer to the base. Tilt this back, and use a screwdriver to unfasten the clips that hold the top of the tub in place. Remove the fabric softener reservoir from the center of the basket. Use a socket to unbolt the agitator at the bottom of the tub. Once this is removed, reach down and lift out the old tub. Complete these instructions in reverse to install the new unit.This is a genuine OEM part sourced directly from the manufacturer. This product is compatible with Whirlpool, Amana, Roper, Kenmore, and Maytag appliances.

The Receptacle Clip is an OEM part for GE electric ranges. As an essential safety component, it holds the three-prong power cord firmly in place at the rear of the appliance. 

Causes of a bad receptacle clip can include wear over many use and cleaning cycles that degrade the clip material, or physical damage from impact or forced removal of the power cord.

Symptoms include: 

• The power cord no longer feels securely fastened
• Visible cracks or splits in the clip housing
• Signs of discoloration/melting near the connection point
• Intermittent or shock issues when plugged in

This GE replacement clip restores a tight-fitting receptacle to maintain reliable range operation. Compatible with Hotpoint, RCA, and some Kenmore models as well, replacing yours prevents potential electrical hazards before they develop.
 

Used for the pressure switch.

This washer timer is the cycle control that sequences power to advance the machine through wash, rinse, drain, and spin. Replacing a failed timer restores reliable, on-time cycle progression and consistent operation.

• Controls the order and duration of wash, rinse, drain, and spin cycles
• Advances the cycle automatically via its built-in timer motor
• Directs power to components such as the drive motor, water inlet valve, and drain pump at the proper times
• Common symptoms include cycle not advancing or stopping mid-cycle, washer won't start, won't spin or drain, or a timer knob that doesn't move/only advances manually

• Disconnect power to the washer before servicing.
• Open/tilt the console to access the timer; remove the control knob and dial as required.
• Note wire locations or take a photo; move connectors one at a time to the new timer and secure the mounting screws/tabs.
• Reassemble the console and run a short cycle to confirm the timer advances through wash, drain, and spin.

Right hand side. For screws use WPW10119828.

Color: Almond

Right hand side

This is the white surface burner control knob that mounts on the range's infinite switch shaft. It lets you turn the surface element on and adjust heat levels, restoring accurate, easy temperature control when a knob is worn or broken.

• Controls a surface element by turning the infinite switch from Off through multiple heat settings
• Common failure signs: cracked or stripped knob, knob won't turn the switch, loose fit, or missing knob
• Color: white to match compatible white control panels
• Fits the switch shaft style designed for this knob's insert

• Disconnect power before replacing the knob
• Pull the old knob straight off the switch shaft; align the new knob with the shaft flat before pushing on
• Do not force—misalignment can damage the knob insert or switch
• Test each heat setting after installation

An infinite switch regulates power to a range or cooktop surface element for smooth, variable heat control. Replacing a worn switch restores accurate low-to-high settings and dependable on/off operation for the burner.

• Controls the cycling of power to a surface element based on the knob setting
• Common symptoms of failure: burner won't heat, only heats on high, won't turn off, or temperature can't be adjusted
• Can also cause intermittent heating or an unresponsive/loose-feeling knob if the shaft is damaged

• Disconnect power at the breaker before servicing; high voltage is present
• Access the control area, label/photograph wiring, and transfer leads one at a time to the matching terminals on the new switch
• Mount the switch securely, align the shaft with the knob, and reassemble the panel
• Test the burner through low, medium, and high settings to ensure proper operation

This control knob lets you turn and select settings on the appliance for reliable user control and a secure grip. Replace cracked, worn or loose knobs to restore smooth selection and tactile feedback at the control panel. What it does:

• Fits onto the control shaft to allow setting adjustments and mode selection
• Restores a solid grip when the original knob is cracked, broken or slipping
• Helps stop the knob from spinning on the shaft or failing to engage detents
• Provides the tactile feel and alignment needed for accurate control selection

• Disconnect power (and gas for gas appliances) before servicing the control area.
• Remove the old knob by pulling it straight off the shaft; align any flat/keyed spline and push the replacement fully onto the shaft until seated.
• Many installations are tool-free; if the old knob is stuck, use a gentle puller or padded pry to avoid damaging the panel or shaft.

Size: .20 Fl. Oz. (6 ml)