Sca1001kss-02 Parts

Followed the suggestions and washed off the wave guide cover first (it had some food soil on it). Put it back on and tried operating the microwave with nothing in it. Got a real big spark then. Discovered that there were some areas on the door that had paint scraped off. Looked like the power was all directed to this bare metal area causing the mica wave guide cover to really scorch then, with nothing else inside the microwave to absorb the energy. So I got some black appliance paint and... Read more

With no power in the unit I started to investigate. I removed the power cord and checked the supply. Then I removed a few panels from the unit. The parts are readily accessible and the wiring diagrams on the computer are very helpful. I removed the wires from each device and the probed the devices. I ordered the parts from Appliance Parts Pros online and they shipped the parts in less than one day! Read more

Put in new parts and working fine! Thanks Read more

If you search for this issue online, you’ll see this is caused by a faulty door switch - the primary interlock micro switch (with the red button). This switch is at the lowest position in the bracket that holds the switches. The hardest part for me was pulling the cover off. Two screws on one side of the black cover, one on the other side and several screws in back. The cover slides back. The switches are clearly visible on the right hand side. The white door paddle presses on the switch... Read more

Replaced unit. You need to know that the touch pad needs to come out to make repair. One screw and two tabs on bottom. Mechanical connection on damper unit has a tab that connects assembly to damper unit. This needed to be bent up to remove old part. Read more

I ordered both the Grille Assembly and two Grille Clips because it wasn't clear that the clips came with the assembly; they do. I was glad that I did because one of the clips on the assembly was defective, so I had a back up. NOTE: save your old screws; they are NOT included. Installation is relatively simple. It is important that you get the side edges snapped into position before screwing the assembly into place. This may require another person. You most likely will need a small step stool... Read more

My husband was able to take the door apart and install the handle once we received it. Read more

14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more