Servo Icemaker Model Im20-1 Parts

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in a lawnmower. The purpose of a spacer in a lawnmower is to attach to the deck shell and create a space between one or more components such that friction can be reduced during use.The spacer in a lawnmower is a small fastening component that can be easily lost or misplaced; additionally, the spacer can be damaged during the standard lifespan of the lawnmower that can render it beyond functionality. If the spacer is lost or misplaced, or if the spacer is punctured, dented, warped, eroded, or otherwise damaged, the spacer should be removed and replaced by this genuine OEM replacement part as soon as possible. A replacement will ensure that the appliance continues to function as usual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This spacer is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Ryobi, Bolens, Yard-Man, Cub Cadet, and Husky.

This OEM idle mandrel pulley kit includes the pulley, spacer/washer, and a bushing. This idle mandrel pulley spins the blade on a lawnmower deck of a tractor mower.A new idle mandrel pulley kit will be needed if the bearing for this pulley is damaged, broken, or lost because the bearing is not available by itself. If the bearing inside of the pulley is not spinning freely as it should, then the entire idle mandrel pulley kit will be needed to repair this machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This genuine MTD part is sourced directly from the manufacturer and sold individually. The idle mandrel pulley kit is compatible with lawn tractors manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, Cub Cadet, Husky, and Murray.

This genuine OEM replacement part idler pulley plays an important part on many lawn tractors, mowers, and snowblowers. It drives the engine's belt system, particularly the belts connected to the crankshaft. It helps to create motion throughout the engine, including in the steering pump, air compressor, and the alternator. Therefore, without this pulley, the engine will not function properly. As with any part of an engine, an idler pulley will begin to wear down over time. When this happens, an idler pulley will begin slipping, causing the belts to no long run smoothly. If an idler pulley breaks completely, the engine will not start. Before replacing an idler pulley, be sure to let the engine cool completely, as you will have to remove several parts with a screwdriver and socket wrench set. This idler pulley will work with Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Yard Man appliances. It is a high-quality replacement part sourced directly from the original manufacturer. This part ships individually.

This support bracket is a genuine MTD part, sold individually. A support bracket can be used as a replacement part in a lawn mower. This genuine OEM part is made out of high quality, durable metal material meant to bolster and stabilize the placement of one or more components on the internal or external machinery of a lawn mower.If the support bracket has been punctured, dented, cracked, chipped, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued usage of the appliance. This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This support bracket is compatible with the following outdoor appliance brands: MTD, Toro, and Cub Cadet.

This genuine OEM replacement 54-inch deck skirt is used on a riding lawnmower and tractor with a deck span of 54-inches. By installing a deck skirt, or baffle onto the mower, it will increase the airflow under the deck. The benefit of having better airflow is that it makes it easier for the grass and clippings to either be sucked into the bagger or to be better distributed as mulched across your lawn. Another benefit that adding a skirt to the mower's deck is that it will prevent grass from clumping and getting stuck to the bottom of the deck and clogging it up. On occasion, rocks and other debris shooting out of the mower's deck can cause the skirt to become damaged, and in some cases, it will need to be replaced. Installing the 54-inch replacement desk skirt is a fairly easy job and should be able to be accomplished by a beginner. The installation will require a socket wrench in order to bolt the skirting to the outside of the mower's deck. This 54-inch skirt deck is compatible with MTD, Troy-Bilt, Yard-Man. Craftsman, and Cub Cadet models. This replacement deck skirt is sourced directly from the manufacturer and is sold individually.

This clevis pin is a metal fastener without threads like most screws. It has similarities to a bolt and is often inserted into a pre-drilled hole to secure two or several items together in yard and garden equipment. Clevis pins will have a hold through the end where cotter pins can be attached to secure the pins into place. Sometimes these pins can become corroded or experience damage which will require them to be replaced.If the clevis pin is falling out, broken, or damaged, it needs to be removed. Spraying it with penetrating oil and letting it sit for a few hours before pulling the cotter pin away from the clevis pin is the best technique. A pry bar can be used to take the pressure away from the clevis pin before hammering against the clevis pin to take it out. At that point, the new clevis pin can be installed.Created for use in chainsaws, lawnmowers, and snowblowers, this clevis pin fits lawn and garden equipment by MasterCut, Craftsman, Yard-Man, Toro, Yard Machines, Cub Cadet, MTD, and Murray. This is a genuine OEM product directly sourced from the manufacturer that comes as an individual component.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.

This is a spring switch that is used in many types of lawn and garden equipment, such as log splitters, lawnmowers, and tillers. The spring switch is made out of durable metal and is typically located near the switch button. With ordinary use, the spring switch can experience wear or other types of damage and stop working correctly. When this occurs, it will need to be replaced.If the spring switch is broken or bent, a screwdriver will be needed to replace it. The lawn equipment should be powered off and placed on a stable surface during the replacement. Disassemble the unit and locate the contacts to access the spring switch and other small parts. The original switch can be removed using a screwdriver so the new component can be installed. Reassemble and power the tool on before use.This spring switch is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold on an individual basis. The part is made to be compatible with lawnmowers, snowblowers, tillers, log splitters, and wood chippers manufactured by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, MasterCut, and Turf King.