Shx68t52uc/09 Parts

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

This replacement dishwasher door handle restores a secure, easy-to-grip place to open and close the door, improving usability and appearance. Designed to match the original fit and mounting style for straightforward swap-out. What it does:

• Replaces a cracked, bent, or missing door handle so the door can be opened and closed safely
• Provides a solid grip to prevent slips and reduce stress on the door panel
• Restores factory appearance when the original handle is damaged or worn
• Helps prevent further cabinet or door edge damage from makeshift grips

• Disconnect power to the appliance before starting any repair to avoid injury
• Many installations require removing the inner door panel to access mounting screws; keep hardware organized
• Use basic hand tools (screwdriver, nut driver) and avoid overtightening fasteners to prevent damage

This holder secures internal components to keep assemblies aligned and stable, reducing vibration and wear. It's a simple replacement that restores proper fit where a broken or missing clip causes loose panels or noisy operation. What it does

• Secures and aligns panels or wiring harnesses inside the appliance
• Prevents rattling, vibration, and misalignment caused by damaged or missing clips
• Helps maintain proper component spacing to avoid wear or interference
• Restores secure attachment after breakage or plastic fatigue

• Disconnect power and water before starting any repair
• Remove access panels or trim to reach the damaged clip—keep fasteners organized
• Press or snap the holder into place; replace any broken tabs before reassembling
• If plastic anchors are damaged, replace them with matching OEM clips

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

Electronic control module that manages program selection, timing and the appliance's user controls. Replacing this module can restore proper cycle sequencing and control-panel responsiveness when the original control is faulty. What it does:

• Governs program selection, cycle timing and sequence control for the appliance's main functions.
• Restores responsiveness when buttons or touch controls do not register or the panel is unresponsive.
• Can address symptoms such as blank or flashing display/LEDs related to control failures.

• Disconnect all power to the appliance before starting work to avoid shock; verify power is off at the breaker.
• Handle the module carefully and avoid touching circuit contacts; use a grounded wrist strap if available to reduce ESD risk.
• Ensure all wiring harness connectors are fully seated and routed correctly; recheck door latch and fuses before assuming module failure.

The Door Handle is an OEM part for Bosch dishwashers. It provides a convenient and sturdy way to open and close the dishwasher door. The door handle is designed to withstand repeated use and provide a comfortable grip. It ensures that you can easily access the dishwasher's interior to load and unload your dishes.

A bad door handle can occur due to wear and tear, accidental damage, or improper installation. Signs of a faulty handle include a loose or wobbly grip, difficulty in opening or closing the door, or complete detachment from the dishwasher door.

Symptoms of a bad door handle include:

• Difficulty in fully opening or closing the door
• The handle detaching from the dishwasher
• Scratches, dents or discoloration 

Replace your damaged or worn-out dishwasher door handle with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This insulating part installs in the specified location to help reduce heat transfer between internal spaces and exterior panels. Replacing a worn or missing insulator helps protect nearby components and maintain proper operating temperatures.

• Provides a thermal barrier to limit heat transfer to surrounding panels and wiring
• Helps prevent scorching or heat damage to adjacent components
• Restores proper insulation where the original has deteriorated or is missing
• Common signs of failure: visible damage or fraying, burnt odor, or unusually hot exterior areas

• Disconnect power and allow the appliance to cool completely before servicing
• Wear gloves and eye protection; insulation fibers can irritate skin and eyes
• Match the original orientation/placement; do not over-compress the material
• Keep insulation clear of vents, heating elements, fans, and moving parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This cable harness routes power and control signals between the appliance's control and its components. Replacing a damaged harness restores solid electrical connections so the unit starts, runs, and completes cycles without intermittent failures or non-working functions. What it does:

• Distributes electrical power and control signals between boards, motors, valves, and sensors
• Replaces wiring that is burnt, brittle, frayed, or corroded
• Helps resolve symptoms like won't start, intermittent operation, inoperative features, or error/fault indications related to open/shorted circuits
• Restores safe, reliable connectivity to prevent further electrical damage

• 1 cable harness assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Photograph/label connections and routing to match the original layout
• Seat connectors fully by the housings; do not pull on wires
• Route and secure away from sharp edges, moving parts, and hot surfaces to avoid chafing or heat damage

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place