Umv11252cas Parts

Color: Black

Seal tape restores a tight seal around appliance doors and panels to help prevent air or moisture leaks and improve temperature stability. Use it to replace worn or missing sealing strips that allow drafts, frost, or heat loss. What it does

• Creates a flexible barrier to close small gaps and reduce airflow or moisture migration at door and panel seams.
• Helps maintain correct internal temperatures and can reduce frost buildup or inefficient cooling/heating.
• Replace when tape is cracked, compressed, detached, or visibly deteriorated.
• Commonly used where a thin, form-fitting sealing strip is needed on appliance doors and access panels.

• One seal tape.

• Clean and dry the mating surface before installing for best adhesion; remove old residue.
• Cut to fit and press firmly along the length to seat the tape; trim excess as needed.
• Disconnect power (unplug or switch off breaker) before starting.

The Microwave Thermostat is essential for maintaining optimal temperature control in your Samsung microwave. This genuine OEM part ensures accurate regulation of heat, preventing overheating and ensuring consistent performance. Designed specifically for Samsung microwave models, it guarantees a perfect fit and reliable operation. The Microwave Thermostat helps extend the lifespan of your appliance by protecting its internal components from temperature fluctuations. By choosing this genuine OEM part, you can trust in its quality and durability, making your repair process seamless and efficient. Whether your microwave is not heating properly or experiencing temperature-related issues, this thermostat provides a dependable solution to restore its functionality. Enhance your microwaveGÇÖs performance with the Microwave Thermostat , ensuring safe and efficient cooking every time.

This refrigerator water filter cartridge replaces the installed filter to help restore clear, better-tasting water and improve ice quality. It's a direct-fit replacement designed for compatible Whirlpool refrigeration systems. What it does:

• Filters water to reduce common impurities that can affect taste and clarity
• Helps improve the quality of ice produced by the refrigerator
• Can resolve symptoms like cloudy water, off-taste, or reduced water flow from the dispenser
• Restores proper filtration performance when the original filter is expired or clogged

• Follow the refrigerator manufacturer's instructions for removal and installation.
• Run and discard the recommended amount of water after installation to flush the system before use.
• Turn off the water supply and disconnect power if required by your model before servicing.
• Inspect the new filter for damage; do not use a damaged filter.

This thermostat is a temperature-sensing limiter that helps regulate and limit appliance heat for safe operation. It restores proper temperature control so the appliance runs within designed operating ranges. What it does:

• Senses internal temperature and opens/closes the circuit to control heating
• Prevents overheating by interrupting power when temperatures exceed safe limits
• Commonly used in dryers and ranges as a safety/temperature control component

• Disconnect power (and gas, if applicable) before servicing to avoid shock or fire
• Handle the sensor and terminals carefully to avoid damage; avoid bending the sensing element
• One thermostat temperature limiter

This interlock is the door latch assembly that secures the appliance door and tells the control when the door is closed so the unit can operate safely. It helps restore proper door closure and prevents operation with an open door. What it does:

• Secures the door in the closed position and engages the door-sensing mechanism
• Prevents the appliance from starting or running when the door is open
• Common symptom: appliance won't start or stops mid-cycle because the door won't latch
• Common symptom: door feels loose or doesn't stay closed firmly

• Disconnect power (unplug or shut off circuit) before any repair
• Remove door or access panel as required for your model; follow manufacturer service instructions
• Use basic hand tools; avoid forcing plastic tabs or connectors

This capacitor stores and releases electrical energy to help an AC motor start and run smoothly. Replacing a weak or failed capacitor can restore reliable motor operation and reduce humming, no-start, or stall conditions.

• Provides the phase shift and starting torque an induction motor needs to start
• Helps the motor reach and maintain proper speed under load
• Common symptoms of a failing capacitor: motor hums but won't start, intermittent starts, slow or stalled rotation, or frequent thermal trips
• Visible clues may include a swollen case or leaking residue

• Disconnect power to the appliance before servicing; verify no voltage is present
• Capacitors can retain a charge—discharge safely before handling
• Note wire positions; move leads to the new capacitor one at a time and ensure snug terminal fit
• Reuse the original bracket/clip if applicable and secure the capacitor to prevent vibration

Color: Black (Qty of 1)

The Interlock is an OEM component specifically designed for Whirlpool microwaves. Located inside the door assembly, the interlock provides a safety function that prevents microwave energy from emitting when the door is opened. 

Composed of a magnet and lever switch beneath a metal shield, the interlock uses electromagnetic principles to immediately turn off microwave power if the door is opened during a cook cycle. This ensures safe access to hot food inside the cavity.

Causes of a bad interlock include worn contacts or weakening of the magnetic mechanism from sustained use over time. Physical damage or debris interfering with smooth lever operation are also possible causes.

Symptoms of a bad interlock include: 

• Microwave emission even with door slightly ajar  
• Faulty “door open” detection during cooking
• Inability to start new cycles until manually reset

This OEM part fits kitchen microwaves from Whirlpool, KitchenAid, Jenn-Air, and select Kenmore models.

Color: metallic. It measures about 6-1/2 inches wide by 9 inches deep.

This molded wire support clip secures wiring and small harnesses to the appliance cabinet or components to prevent rubbing, pinching, or contact with moving/heat-producing parts. It helps reduce chafing and electrical wear for safer, more reliable operation. What it does:

• Holds wiring harnesses and individual wires in place to prevent contact with sharp edges, motors, or heating elements
• Minimizes wire movement and vibration that can lead to chafing or broken conductors
• Helps maintain proper routing for consistent connections and component performance
• Commonly used where a small push-fit retainer is needed to secure low-voltage or signal wires

• One wire support clip as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Push-fit installation: align clip over wire/harness and press into the mating hole or slot until it snaps in place; clip may require slight flexing
• Inspect surrounding wiring and routing for damage; replace any frayed or exposed wires before reassembly
• If the mounting hole or panel is damaged, use the correct replacement panel or a suitable repair to ensure a secure fit

This grill vent is the front vent trim that channels heat and smoke away from the cooktop and oven cavity, keeping internal components protected and helping your range vent properly during broiling and baking. What it does:

• Directs exhaust and heat away from the oven cavity to help maintain proper airflow.
• Protects underlying components and internal wiring from direct heat and food debris.
• Replacing a damaged vent can reduce smoke buildup and improve overall oven performance.

• Disconnect power to the appliance (and gas if applicable) before starting any work.
• Use care handling edges; trim pieces can be sharp.
• Removal/installation typically involves removing fasteners or clips—keep hardware handy for reassembly.

This magnetron is the high-voltage tube that generates microwave energy to heat food in compatible countertop and over-the-range ovens. Replacing a failing magnetron restores cooking performance and stops warm-only or no-heat operation. What it does

• Converts high-voltage electrical energy into microwave radiation for food heating
• Commonly related to ovens that produce no heat, very weak heat, or intermittent heating
• Can cause unusual humming, arcing/sparking inside the cavity, or burnt-odor symptoms if failing
• Works with the oven's high-voltage assembly and waveguide to distribute microwave energy

• Disconnect power and unplug the appliance before any service—high-voltage components can retain a lethal charge
• Handle the magnetron carefully; avoid touching terminals or the antenna to prevent damage

The Microwave High Voltage Transformer is essential for maintaining the performance of your microwave. This genuine OEM part ensures that your appliance operates with the correct voltage, providing consistent heating and reliable functionality. Designed specifically for Samsung microwaves, the TRANS HV offers a seamless fit and easy installation, allowing you to restore your microwave's performance without hassle. By replacing a faulty high voltage transformer with this genuine OEM part, you can enhance the safety and efficiency of your microwave, preventing potential electrical issues. The TRANS HV is built to last, delivering durable performance that supports your daily cooking needs. Whether your microwave has stopped heating properly or shows signs of transformer failure, the Microwave High Voltage Transformer is the perfect solution to get your appliance back to working condition. Trust in this high-quality component to provide the dependable operation you expect from your Samsung microwave.

This thermistor is a refrigerator temperature sensor that monitors internal air temperature so the control board can regulate cooling. Replaces a failed sensor to help restore accurate temperature readings and more consistent cooling. What it does:

• Senses internal refrigerator temperature and sends a variable resistance signal to the control board
• Helps the control system cycle the compressor and fans correctly for stable temperatures
• Commonly replaced when refrigerator runs too cold, too warm, or has irregular cooling cycles
• Can address temperature-error codes or defrost control issues when the sensor is faulty

• Disconnect power to the appliance before inspecting or replacing the sensor
• Handle the sensor and wiring harness carefully to avoid damage to the probe or connectors
• Install in the original sensor mounting location and secure wiring away from moving parts