Vgso166-Ssbr Parts

This bimetal gas control valve regulates gas flow to the oven burner as part of the ignition circuit, helping ensure safe light-off and steady, reliable heat so your range reaches and maintains the set temperature.

• Regulates gas to the burner in response to the igniter/thermostat signal
• Bimetal safety design keeps gas closed until proper ignition heat is present
• Helps maintain consistent heating once the burner is lit
• Can address cases where the igniter glows but the burner won't light
• Resolve ovens that heat intermittently or take unusually long to preheat

• Disconnect power and shut off gas supply before servicing.
• Note valve orientation; transfer any required fittings/orifices from the original.
• Use approved gas-rated thread sealant on NPT threads only; never on flare connections.
• After installation, leak-test all joints and verify proper ignition and burner operation.

A flat hot-surface ignitor that replaces a worn oven ignitor to restore reliable burner ignition. Heats to ignition temperature so gas burners can light more consistently and help the oven reach operating temperature. What it does:

• Heats to a high temperature to ignite the oven or range gas burner
• Common failure symptoms: oven won't light, long ignition delay, or intermittent ignition
• Direct replacement for flat-style hot-surface ignitors used in compatible gas ovens and ranges
• Matches electrical connector and mounting style of the original flat ignitor design

• Always shut off electrical power and the gas supply before starting repair
• Handle the ceramic element carefully — it is fragile; avoid touching the element surface with bare hands
• Verify connector/wire compatibility and use the original mounting hardware or manufacturer-recommended fasteners

This left-hand oven burner restores proper flame distribution for consistent baking and roasting. Replacing a corroded, warped, or clogged burner helps eliminate uneven temperatures and weak or irregular flames on the left side of the oven.

• Generates and distributes the bake flame on the left-hand side of the oven
• Helps maintain stable oven temperatures for even baking and roasting
• Replacing a damaged or clogged burner can address uneven heating, weak/yellow flames, or delayed ignition on that side
• Direct, model-specific replacement for the original left-hand burner

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the oven to cool completely; remove racks and any flame spreader/heat baffle as needed for access
• Remove mounting screws and detach the burner from the gas tube/manifold; transfer any reusable brackets or hardware
• Reassemble securely, restore gas, and check for leaks; verify proper flame appearance per the service manual

This pressure regulator controls incoming natural gas pressure to the appliance, helping maintain steady burner performance and proper combustion. It replaces a worn or faulty regulator to restore correct gas flow and consistent heat. What it does:

• Regulates downstream natural gas pressure for safe, consistent burner operation
• Can correct symptoms such as weak or uneven flames, difficulty maintaining a flame, or a burner that won't light reliably
• Works with the appliance's gas valve and manifold to balance fuel delivery to burners
• Designed to meet OEM fit and function for compatible Viking gas ranges

• Turn off gas supply and electricity before starting any repair
• After installation, perform a proper gas leak test and check for correct burner operation
• Do not modify the part; use the OEM-specified regulator for safe operation

This left-hand single thermal valve controls gas flow to one burner assembly, helping restore safe, consistent operation in affected ovens or ranges. It replaces a faulty valve to re-establish proper temperature regulation and ignition behavior. What it does:

• Regulates gas flow to the left-side burner or oven pilot as part of the appliance's gas control system
• Helps prevent unwanted gas flow when the burner is off and allows normal ignition when called for
• Commonly used when burners fail to light, spark but no gas, or flame is irregular on the left side
• Works with existing mounting and gas line connections as the OEM replacement component

• Turn off the appliance's gas supply and electrical power before starting any repair
• Only connect or adjust gas fittings with proper tools and thread sealant rated for gas; check for leaks after installation
• Do not modify the valve; replace with the correct left-hand unit to ensure safe operation

This black replacement clock knob restores manual control of the oven clock and timer so you can set and adjust time and timer functions easily. Designed to match original fit and feel for a clean, finished look. What it does:

• Replaces a missing, cracked, or worn clock/timer knob so controls can be turned and time settings adjusted
• Restores proper grip and tactile feedback for reliable manual operation
• Helps eliminate slipping or loose knob problems that prevent accurate timer/clock setting

• Disconnect power to the appliance before attempting any service
• Pull the old knob straight off the control shaft; no tools are typically required
• Align and push the new knob firmly onto the shaft until fully seated
• Allow the appliance to cool before replacing the knob

This door glass seal strip replaces the rubber/foam seal that fits between the oven door and its inner glass to help keep heat and odors inside the oven. Restores a tighter door seal for more consistent cooking and reduced heat loss. What it does:

• Seals the gap around the inner door glass to reduce heat escaping from the oven cavity
• Helps prevent smoke and odors from leaking into the kitchen during use
• Cushions and stabilizes the inner glass to reduce rattling or vibration
• Supports oven temperature consistency by improving the door seal

• Disconnect power and allow the oven and door to cool completely before starting
• Removing the oven door or inner glass panel may be required; follow the manufacturer service instructions
• Inspect the seal channel and glass edges for damage or debris before installing the new seal
• Use only manufacturer-recommended fasteners or adhesives; do not overtighten clips or screws

A replacement hinge assembly that secures and guides the appliance door for smooth opening and reliable closure. Restores proper door alignment to reduce sagging, rubbing, and incomplete latching on compatible Viking units. What it does:

• Mounts the door to the cabinet and provides the pivot point for opening and closing.
• Supports door weight to prevent sagging and misalignment over time.
• Helps the door close fully and maintain a proper seal to improve operation.
• Common symptoms this part can fix: door droops, door rubs or binds, uneven closing, or noisy hinge movement.

• Disconnect electrical power (and gas supply where applicable) before beginning any repair.
• Support the door while removing/installing the hinge to prevent dropping or damage; have an assistant if needed.
• Keep all fasteners and small parts; replace damaged hardware with OEM-specified screws if required.
• Follow the OEM service manual or diagram for correct orientation, alignment, and torque.

Light bulb socket assembly includes: Light bulb socket, light bulb and light lens.

10 1ʺx 20ʺ x 77' roll

This listing is for a Viking oven bottom pan assembly. The oven bottom pan sits above the flames in the bottom section on specific models of Viking gas ovens. Their intended use is for stopping grease and other food byproducts from stoking the fire from the gas igniter. This model of Viking gas seems to have a few specific indicators that could signal a damaged bottom pan. There could be a possible gas smell coming from the oven and a sound of popping flames. This is because the pan is moving, allowing more gas fumes to exit the appliance. The flames popping are most likely from liquid spilling onto the igniter area. Always unplug the range from any electrical outlet and gas sources before beginning repairs. Wear gloves when working around the range area and look out for sharp edges.This is a genuine OEM part and is sourced individually from the original manufacturer. This part is compatible with Viking, KitchenAid, and Whirlpool appliances.