Wed7ohebwo Parts

This periscope extension piece helps position or extend a small duct/vent component inside the appliance so airflow or sensing elements reach the correct location. It's a simple replacement that restores proper alignment and fit. What it does

• Provides a 0.5-inch extension/positioning for an internal vent or sensor tube
• Restores proper clearance and alignment of airflow or sensing components
• Can reduce airflow restriction or misalignment-related symptoms
• Helps resolve intermittent venting, sensor mispositioning, or fitment issues

• One periscope extension piece

• Typical replacement is a simple swap; power off and unplug the appliance before starting
• Remove any access panels needed to reach the original periscope; retain mounting clips or gaskets
• Inspect surrounding parts for damage and replace if worn to ensure proper seal and operation

The Power Cord is an OEM component specifically designed for Whirlpool electric dryers. Extending from the rear of the unit, the durable cord safely channels the high current needed for power cycles and airflow. With a heat-resistant jacket and contact plug construction, the cord withstands ambient temperatures well beyond its warranty. 

Causes of a bad power cord involve flex fatigue through repeated positioning and weakening internal wires. Normal drying heat cycles may degrade insulating layers.

Symptoms of a bad power cord include:

• Intermittent function or failure to start due to loose connections
• Tripped circuit breaker following appliance connection  
• Buzzing or humming issuing from cord during use

This OEM Whirlpool part is also compatible with KitchenAid, Maytag, Amana, Roper, and Admiral dryers. 

This is a replacement mounting nut that secures appliance components and helps keep panels, assemblies and fasteners tight for stable operation. A simple, OEM-fit nut for repair or maintenance. What it does

• Fastens and secures assemblies, brackets or panels to prevent loosening during use
• Helps reduce vibration and rattling caused by loose hardware
• Restores proper component alignment when a stripped or missing nut causes movement
• Fits in the same location and function as the original factory nut

• Inspect the mating bolt/stud and threads; replace damaged hardware before installing the nut
• Tighten to the appliance manufacturer's specified torque where available; avoid over-tightening
• Use hand tools appropriate for the nut size to prevent rounding the hex
• Disconnect power or follow manufacturer safety instructions before servicing electrical appliances

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

A replacement mounting bracket that secures internal components and restores proper alignment for affected appliance assemblies. Replaces a worn or damaged bracket to stop movement and reduce noise caused by loose parts. What it does:

• Provides a stable mount point for internal panels or components to keep assemblies aligned.
• Stops rattling, vibration, or misalignment caused by a broken or bent bracket.
• Restores proper fit and spacing where the original bracket has failed.
• Helps prevent further wear to adjacent parts by keeping components secure.

• Disconnect power and/or gas supply before accessing internal parts.
• Basic hand tools required; follow the appliance service manual for correct removal and installation steps.
• Handle sharp sheet-metal edges carefully and wear gloves and eye protection.

This retainer clip secures small appliance components in place to prevent movement and ensure proper alignment for reliable operation. It's a simple replacement that restores lost or broken mounting support. What it does:

• Holds and stabilizes the attached component or assembly to prevent shifting during use
• Maintains proper alignment for connected parts to reduce wear and noise
• Commonly used where a small plastic or metal clip is needed for secure mounting
• Can address symptoms like loose panels, rattling, or parts that won't stay seated

• One retainer clip

• Disconnect power to the appliance before attempting any repair
• Remove surrounding panels as needed to access the clip; small trim tools may help
• Replace the broken retainer with the new clip and verify the secured component is seated correctly

This coupler connects the washer motor to the gearcase so the motor can turn the transmission and drive the washer's agitator and spin functions. Replacing a worn coupler restores reliable power transfer and normal wash cycles. What it does:

• Transfers torque from the motor to the gearcase so the washer agitates and spins
• Dampens shock between motor and transmission during load changes
• Worn or broken couplers can cause no-agitate/no-spin, slipping, or loud grinding noises
• Prevents direct metal-to-metal contact that can damage motor or gearcase

• Disconnect power and water supply before starting any repair
• Support the tub or transmission per the OEM instructions before removing the old coupler
• Inspect motor shaft and gearcase input for damage; replace additional parts if scored or worn
• Use basic hand tools; follow OEM diagram for proper alignment and secure fit

This genuine control panel is the console assembly that houses the touchpads/buttons and display to operate your appliance, restoring responsive controls and clear status feedback for reliable daily use. What it does:

• Replaces a damaged or unresponsive console to restore control input and display functions.
• Helps resolve symptoms like unresponsive buttons, missing display segments, or erratic control behavior.
• Interfaces with the appliance's main control board to select cycles and options.
• Serves as the user-facing housing for controls and indicator lights.

• Disconnect power to the appliance before beginning any work to avoid electric shock.
• Installation may require removing trim or bezels and transferring switches or brackets; keep fasteners organized.
• Handle the display and ribbon/connectors carefully to avoid damage from flexing or static.

This wire harness assembly routes power and signals between the appliance's control and electrical components so the unit can operate reliably. Replaces a damaged or burnt harness to restore proper electrical connections. What it does:

• Carries power and control signals between switches, controls, motors, and sensors
• Restores lost power paths that can cause controls, lights, or heating elements to fail
• Replaces harnesses with burnt wires, melted insulation, or broken connector leads
• Helps eliminate intermittent operation caused by loose or corroded connections

• Disconnect all power before beginning repair to avoid shock or injury
• Verify routing and connector orientation match the original harness; secure with original clips/ties
• Inspect mating connectors and terminal fittings for damage before reassembly

This wire harness routes power and signals between the appliance control and components to restore electrical connections and proper operation. It replaces a worn, damaged, or corroded wiring assembly to help eliminate intermittent power or control issues. What it does

• Carries power and control signals between the main control and components
• Replaces damaged, frayed, or corroded wiring that can cause intermittent operation
• Helps restore reliable electrical connections to resolve no-power or faulty-control symptoms
• Matches OEM connector types and pin layout for straightforward replacement when correct part number is used

• One complete wire harness as shown

• Disconnect power before starting any repair to avoid shock or equipment damage
• Handle connectors by the housings; avoid pulling on wires to prevent damage