Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix F28 error codes and no-spin issues with a new motor control board. Regulates power to the drive motor for proper agitation and spin. 30-minute DIY.
Took bottom cover off of washer to get to manual inside. Verified cause of F28 and removed MCU (Motor Control Unit). Found that control board burned out. Ordered replacement Thursday about 8:00pm received by FedEx on Monday. Installed replacement and washer works fine again. Installing part and getting everything back in place including test cycle about 30 min. Read more
Extends your washer drain hose by 4 feet when the original is too short to reach your drain pipe. Connects to existing hose with clamp adapter kit.
I ordered the drain extension kit and the hose connector kit. Read more
Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.
Replaced with new part ordered from store Read more
Front counterweight that mounts to the washer's outer tub. Replace if cracked, broken, or missing to restore proper balance and reduce vibration during spin.
It was a very easy repair, I was able to find and order the parts from appliancepartspro.com and use the video that explained step by step how to install the bellow tub seal. The parts were shipped very quickly, I chose the next day shipping option and had my order in my home within 36 hours. Read more
Fixes F02 drain error codes and slow draining. This small ball creates a seal in the tub-to-pump hose to control water flow. Simple DIY replacement.
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more
Dishwasher won't start or door won't latch? This door latch lever connects the handle to the latch mechanism. Simple repair restores secure closing.
Ordered a dispenser motor and switch assembly. Received it 2 days later. Had never tried to fix a washer before. Was so very easy. Watched several videos on appliance parts pros. Was so gratifying!! Read more
Fix F20 or F28 error codes and low water level issues with this pressure switch. Monitors tub filling via air pressure. DIY repair in under 30 minutes.
Several months back, I checked the supply hoses and replaced the hot water hose because of corrosion. The cold water hose was fine. I replaced the water inlet valve and that seemed to fix the problem, but after about a week, the problem resurfaced. After searching various internet resources, I though the pressure switch which detects the water level could be bad. I order both the pressure switch and the hose that connects it to the air chamber. Before installing the new pressure switch, I... Read more
Washer won't start or trips breaker? This RFI noise filter conditions AC power and protects control circuits. Easy DIY fix with video guide included.
Washer won't start or shows electrical faults? A failed ground switch disrupts the safety circuit. This switch restores proper grounding for reliable operation.
Watched YouTube and ordered parts then replaced the parts and walla !!!! All was good. Read more
8-18 x 1/2 inch mounting screw for refrigerators, washers, dryers, and other appliances. Replace stripped, missing, or damaged screws during repairs.
Washer won't spin or makes noise? This retaining nut secures pump and motor components. Common cause of leaks and wobbling. Basic tools needed.
Took back off of washer and replaced parts. Read more
Fix F-05 error codes or washer not heating water. This heater assembly includes built-in temperature sensor. Video guide available for DIY install.
Ordered the Water Heater and followed the online video. Read more
Retainer hook that secures your washer's detergent drawer in place. Replace if broken, cracked, or missing to keep the drawer seated and prevent leaks.
Remove top of washer and screws from panel remove and replace. Read more
Creates a watertight seal in 3/8-inch compression fittings. Replace when hardened, cracked, or leaking to restore a drip-free connection. Verify size fits.
Tub bearing failure, basically the whole machine has to be taken a part. I've used appliancepartspros in the past so I came back. Quick shipping, parts ordered Thursday night and got here Monday. Take your time or you'll just cost yourself more money. I was lucky in that I did not have to buy the $568 inner tub because I found a bearing and seal kit on Amazon for $80. Historically appliancepartspros' website has been very accurate indicating in stock or not. It appears those days are gone. I... Read more
Drain hose routes wastewater from your laundry center to the household drain. Replace if cracked, kinked, or leaking to restore proper drainage.
Changed upper plate & inlet hose real easy. Read more
Threads into the washer base to adjust height and stabilize the unit. Replace if cracked, stripped, or missing to eliminate rocking on uneven floors.