Wfw96600tw Parts

The Hose is an OEM part for Whirlpool washing machines. As an integral part of the water inlet system, this reinforced rubber hose transports water from the home's supply lines into the washer. 

Symptoms of a bad hose can include:

• Leaks or drips from hose connections 
• Visible cracks or bulges in the rubber material
• Kinked or overly stiff hose that resists bending
• Water flow issues causing improper fill levels

Causes may relate to minerals/scale buildup weakening the hose over time, accidental cuts or punctures from improper handling, or flex fatigue from repetitive use. 

This Whirlpool replacement hose is constructed of durable rubber for years of leak-free service. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine brands.

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal

This electronic control board replaces the appliance's main control assembly to restore cycle selection and timed operations. It provides the control logic that runs the appliance's functions and responds to user inputs. What it does:

• Manages cycle selection, timing and sequencing for the appliance's functions
• Receives input from controls and sensors and sends power/signals to motors, valves and heating elements
• Helps stop and start cycles when control signals are sent or received
• Common symptom when failing: appliance won't start, won't respond to controls, or shows control-related error codes

• One electronic control board (main control) as shown

• Disconnect power before beginning work to avoid shock; verify power is off at the breaker
• Handle the board by its edges and avoid touching contacts to reduce static or contamination risk
• Reconnect all wire harnesses exactly as removed and secure any mounting hardware

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

This front panel is the outer trim piece that restores the appliance's appearance and protects internal components from everyday wear. A direct-fit replacement when the original front is cracked, dented, or cosmetically damaged. What it does:

• Replaces the damaged or worn outer front trim to improve the appliance's look
• Protects underlying components and edges from knocks, spills, and general wear
• Helps ensure door alignment and proper sealing when used with intact internal parts
• Addresses visible damage like dents, cracks, chips, or peeling finish

• One front panel

• Disconnect power (unplug or switch off breaker) before starting work
• Remove door or drawer per service instructions to access mounting fasteners; retain all screws and clips
• Handle carefully to avoid scratching the finish; wear gloves if needed

This retaining clip secures a component or panel inside the appliance. Replacing a bent, missing, or worn clip restores proper retention so parts stay seated and operate without excess movement or rattling. What it does:

• Holds a mating part to its bracket, housing, or panel
• Helps prevent vibration-related movement and noise
• Restores proper fit when an original clip is damaged or lost
• Common signs include loose or sagging parts and rattling during operation

• The clip only

• Disconnect power and, if applicable, turn off water before servicing
• Note the clip's orientation and location before removal
• Use needle-nose pliers or a flat-blade screwdriver to release and seat the clip
• Do not reuse a deformed clip; replace if it won't hold securely

This tub clamp secures a flexible seal or hose to the appliance's tub, maintaining a tight, leak-resistant connection. Replace a weakened or damaged clamp to stop leaks and keep the tub joint stable during operation.

• Applies even clamping pressure around the tub connection
• Helps prevent water leaks at the tub-to-seal or tub-to-hose joint
• Restores proper fit when the original clamp is stretched, stripped, corroded, or missing
• Common symptoms: water at the base/front, loose seal or hose, visible clamp damage

• Disconnect power and turn off water before service
• Access the tub connection; remove the old clamp and inspect the seal/hose for wear
• Clean mating surfaces; seat the seal evenly, position the clamp, and tighten until snug without pinching the rubber
• Run a quick fill/drain test and check for leaks

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This expansion control board assembly routes signals between the oven/range control and auxiliary modules so accessory functions and displays work properly. Replacing a faulty expansion board restores communication and control for related features. What it does:

• Manages auxiliary I/O and communicates with the main electronic control board
• Provides power and signal control for displays, sensors, and accessory circuits
• Can cause communication errors, unresponsive touch controls, or non-working display segments when failing
• Required if accessory functions stop responding or if specific control error codes point to an expansion module

• Disconnect power (unplug or turn off the breaker) before starting any repair.
• Handle the board carefully and avoid static discharge; use proper ESD precautions when possible.
• The part number on the replacement board matches the original before installation.
• Some models require removing the console or back panel for access.

This funnel directs liquid fabric softener and bleach from the dispenser into the wash tub to ensure proper dispensing and reduce splashing. Fits into the washer dispenser assembly to restore correct chemical flow during cycles. What it does:

• Channels liquid fabric softener and liquid bleach from the dispenser to the wash tub
• Prevents splashing and spilling inside the dispenser area
• Helps ensure timed delivery of additives during the correct cycle
• Commonly replaced when the funnel is cracked, clogged, or missing

• One fabric softener and bleach fill funnel

• Disconnect power to the washer before servicing to avoid shock or injury
• Remove the dispenser or control console as required to access and snap the funnel into place
• Inspect surrounding dispenser components and gaskets; replace if damaged
• No special tools required for most installations.

This stator is the stationary motor component that creates the magnetic field needed for the washer's drive motor to operate. It restores motor function so the appliance can agitate and spin normally. What it does:

• Generates the magnetic field that interacts with the rotor to drive the motor.
• Enables proper agitation and spinning when the motor and rotor are functioning.
• Commonly replaced when motor runs poorly, makes unusual noises, or the washer fails to spin.
• Works as part of the motor assembly to maintain consistent motor performance.

• One stator

• Disconnect power and water supply before beginning any repair.
• Access typically requires removing the washer cabinet or motor housing; follow the service manual for your model.
• Inspect the rotor/motor and wiring for damage when replacing the stator.

This genuine mounting screw secures panels and components so assemblies stay aligned and rattle-free. Designed to replace worn or missing fasteners and restore proper fit and function. What it does:

• Secures panels, brackets or trim to prevent movement and vibration
• Restores proper alignment of assemblies that feel loose or shift
• Helps eliminate rattling, squeaks, or parts that fall away during use
• Matches OEM thread and head type for correct fit

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Replace any additional damaged or missing fasteners for best results
• Disconnect power or follow appliance-specific safety steps before working near wiring or energized components

Spring-style hose clamp that secures flexible appliance hoses to fittings, helping keep connections tight to reduce leaks and maintain proper water flow. Use it to replace a worn or damaged clamp and restore a reliable hose seal. What it does:

• Compresses around a flexible hose to lock it onto barbs or fittings
• Helps prevent drips, leaks, and water pooling at hose connections
• Keeps hoses from slipping off during appliance operation
• Useful when a clamp is corroded, stretched, or no longer holds tension

• Disconnect power and shut off water to the appliance before starting any repairs
• Use pliers to compress the clamp for removal and installation; keep hands and face clear when releasing tension
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn

This transport cover secures internal components during shipping and service to prevent movement and damage. It helps keep parts aligned and reduces noise caused by loose components while the appliance is being moved. What it does:

• Holds internal components in place during transport to prevent shifting or impact damage
• Reduces rattles and vibration caused by unsecured parts
• Protects delicate assemblies from knocks during delivery or handling
• Helps maintain alignment of components until the appliance is installed

• One transport cover

• Disconnect power and water before servicing the appliance
• Remove all shipping brackets and covers per the owner's manual before normal operation
• Use manufacturer-specified fasteners and torque; do not force or modify the part

The Stator is an OEM replacement part for Whirlpool washing machines. It is an essential electrical part that powers the motor and spindle during wash cycles. 

Symptoms of a faulty stator include:

• No spinning or agitation within the wash tub 
• Burning smells coming from the motor area  
• Random failure to start cycles or drain properly
• Buzzing or grinding noises mid-cycle

Causes can involve moisture damage over time compromising electronics. Physical impacts may also crack solder joints or short connections. As a high-use part, the stator endures various motor-based stresses.

This genuine OEM Whirlpool component is also compatible with various washing machine models from Maytag, KitchenAid and Kenmore.