Wlsr2000g2ww Ge Washer Parts

Genuine Ge part

Bar Self Leveling

By: Ge

Part Number: WH46X10094

$52.57

Compare At:: $63.08
You Save:: $10.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Conduit

By: Ge

Part Number: WH41X10036

$8.95

Compare At:: $10.65
You Save:: $1.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Base Assembly

By: Ge

Part Number: WH46X10079

$309.95

Compare At:: $368.84
You Save:: $58.89

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Best Seller

Genuine Ge part

Tub Bearing Split Ring

4.8 (122)

By: Ge

Part Number: WH02X10265

This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation.

Symptoms of a bad Tub Bearing Split Ring include:

Excessive vibration or tub imbalance during spins
Loud clunking, knocking or grinding sounds
Reduced spin speeds or inability to achieve high RPMs
Premature tub or bearing wear requiring replacement

Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.

This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models.

NOTE: For the washer outer tub seal order WH02X10383.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e Gerald P. • Auburn , GA • January 28, 2018

I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more

Best Seller

Genuine Ge part

Knob Clip

4.9 (171)

By: Ge

Part Number: WH01X10106

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

The control knob is loose or falls off the panel easily.
Difficulty in adjusting settings due to a loose knob.
The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I was unable to select a cycle knob wouldn't advance and stay Tamara I. • Hatfield , PA • September 23, 2014

I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more

Best Seller

Genuine Ge part

Agitator Assembly

4.9 (28)

By: Ge

Part Number: WH43X10033

The Agitator Assembly is an OEM part for GE washing machines. This part moves clothes through the water and detergent during the wash cycle. This part ensures thorough cleaning by creating the necessary motion to distribute and cleanse laundry evenly.

Causes of a bad Agitator Assembly can range from wear and tear over extended use, to damage from overloading the washing machine, or even issues with the drive mechanism that powers the agitator's motion.

Symptoms of a bad Agitator Assembly include:

Clothes coming out of the wash still dirty or not as clean as expected
The washing machine making unusual noises during the wash cycle
The agitator not moving during the cycle or moving erratically

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken agitator Timothy H. • Pottsville , AR • July 19, 2015

Replaced the broken agitator on my GE washer & couplin. Took a flat rope placed under the old agitator and with a stern jerk it popped off. Then a 7/16 socket set with a long extension took the bolt lose, and removed the couplin. Replaced the new couplin, with the new bolt tighten. Slide the new agitator into place with a stern push it snapped in place. Works perfectly. Thank you for the fast shipping. Read more

Best Seller

Genuine Ge part

Timer

4.9 (16)

By: Ge

Part Number: WH12X10338

The Timer is an OEM replacement part for GE washers. The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

Causes may involve minor power surges exposing delicate components to uncontrolled fluctuations overtime. General wear from years of activating various thermal, agitation and spin functions can degrade sensitive electronics as well.

Symptoms of a bad timer include:

Erratic or inaccurate countdown between cycles
Failure to switch automatically between rinse and spin
Locked buttons or controls suggesting circuit board issues
Inability to modify or set desired cycles and options

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore model washing machines.

Do-It-Yourself Stories from Customers like You The knob on the timer wouldn't engage James S. • Worden , IL • January 02, 2015

Replaced the knob and timer, the lugs were stripped out on the knob and damaged on the timer Read more

Best Seller

Genuine Ge part

Washer Top

5.0 (7)

By: Ge

Part Number: WH44X21834

The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.

Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.

Symptoms of a bad Washer Top include:

Visible cracks, dents, or damage to the top panel
Difficulty opening or closing the lid due to misalignment or warping
Water leaks around the top area during wash cycles
Excessive noise or vibration caused by a loose or damaged top

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The lid and the top we’re both rusty and paint coming off. Paul D. • Lilburn , GA • January 26, 2018

I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more

Genuine Ge part

Funnel Bleach

5.0 (6)

By: Ge

Part Number: WH01X10057

Do-It-Yourself Stories from Customers like You Broken bleach funnel Richard M. • Huntsville , AL • April 10, 2018

Took out the broken one and snapped the new one in , done. Read more

Genuine Ge part

Drain Hose

4.9 (9)

By: Ge

Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system.

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

Water leaking from the back or underside of the washing machine
Pools of water around the area where the washing machine is installed
Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

Genuine Ge part

Magnet Housing Asm

5.0 (3)

By: Ge

Part Number: WH01X10222

Do-It-Yourself Stories from Customers like You Intermittent no spin. The rubber tub isolators broke. Michael M. • Baldwinsville , NY • July 18, 2023

I removed and inspected the lid magnet. It had a 1/8" layer of corrosion. I removed the layer of corrosion and reinstalled the part. the symptom improved. That was a stop-gap repair until the new lid magnet arrived. The broken rubber isolators were discovered when I removed the top of the washing machine. Read more