Wrs588f1hz00 Parts

This ice bin latch assembly secures the refrigerator's ice container so it stays seated and aligned with the auger drive. Replace a worn or broken latch to restore consistent ice dispensing and a snug fit.

• Locks the ice bin in place and aligns it with the auger/dispenser drive
• Helps prevent the bin from wobbling, shifting, or popping loose
• Can resolve no or intermittent ice dispensing caused by bin misalignment
• Direct replacement when the latch is cracked, worn, or missing

• Disconnect power to the refrigerator; turn off the water supply if needed
• Remove the ice bin to access the latch area
• Release retaining tabs/fasteners, note orientation, and install the new latch assembly
• Verify smooth latch engagement before reinstalling the bin and restoring power

This freezer bin restores secure, organized storage in the freezer compartment. Replace a cracked, warped, or missing bin to regain capacity and keep items from tipping, sliding, or falling during everyday use.

• Provides a dedicated space to hold and organize frozen items
• Helps keep food from shifting when opening and closing the freezer
• Replaces bins with cracked plastic, broken tabs, or that won't mount securely
• Common symptoms: reduced storage capacity, items falling, or bin not staying seated

• Empty the bin, then lift and remove the damaged bin from its mounting points
• Allow the new bin to warm to room temperature before installation to reduce risk of cracking
• Align with the correct slots/rails and press firmly until fully seated—do not force
• Wear gloves to protect hands from sharp edges and cold surfaces; follow your model's instructions

The Ice Chute Mounting Bracket is an OEM replacement part for Whirlpool side-by-side refrigerators. It securely positions the removable ice chute opening above the storage bin.

Causes for bracket failure involve standard wear from long-term usage. Repeated lifting of the chute subjects mounting screws and anchors to consistent force strains over many seasons. 

Symptoms requiring replacement involve:

• Loose, sagging or detached ice chute positioning
• Lost or stripped mounting fasteners  
• Ice jamming or spillage due to misaligned openings
• Safety hazards from potential pinch points

This authentic Whirlpool replacement is compatible with Jenn-Air, KitchenAid and Maytag panel-ready stainless steel refrigerators as well.

Color: Stainless

The Door Handle is an OEM part for Whirlpool refrigerators. It provides an ergonomic grip that allows for easy opening and closing of the refrigerator door. The handle bears the inward force across the door to deliver smooth operation with each use.

Causes of a bad door handle can include cracks, breaks or wear to the plastic over time due to repeated opening/closing motions. Physical damage from impact is also a possible cause of handle failure.

Symptoms of a bad door handle include:

• The handle no longer securely holds the door closed
• Difficulty opening the door without the handle assistance
• Cracks or breaks visible in the plastic
• Loose, sagging or misaligned handle placement

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Glass Shelf is an OEM part for Whirlpool refrigerators. The tempered glass shelf is designed to fit on the intended shelf tracks within the refrigerator compartment.

Causes of a bad glass shelf can include cracks or chips on the surface over time due to repeated impact or excess weight loads. The glass shelf could also become loose or unstable if the mounting clips or tracks become worn out.

Symptoms of a bad glass shelf include:

• Cracks, chips, or other visible damage to the glass surface
• The shelf rocking or wobbling excessively on the tracks
• Inability to properly mount or secure the shelf within the refrigerator

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Rocker Switch is an OEM part for Whirlpool refrigerators. This switch is responsible for controlling the operation of your refrigerator's ice maker, allowing you to turn it on or off as needed, providing you with easy control over the ice maker.

A bad switch can occur due to regular wear and tear, electrical issues, or physical damage. If you notice symptoms such as an unresponsive switch, inability to turn the ice maker on or off, or inconsistent ice production, it may be time to replace the rocker switch.

Symptoms of a bad switch include:

• Unresponsive switch
• Inability to turn the ice maker on or off
• Inconsistent or inadequate ice production

Regain control over your Whirlpool refrigerator's ice maker by replacing the faulty or malfunctioning on/off rocker switch with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This pan cover assembly for the fresh food section forms the shelf above a refrigerator drawer, supporting the glass and guiding the bin so it slides smoothly—restoring strength and organization when the original is cracked or warped.

• Creates the shelf surface above drawer(s) and supports the glass insert
• Provides alignment/rails so drawer(s) open and close correctly
• Helps contain spills and separates the drawer compartment from the shelf area
• Replace if cracked, broken, bowed, or if drawers bind, won't close fully, or the glass won't sit flat

• Disconnect power and remove food from the work area
• Slide out drawer(s) and lift out the glass
• Transfer any reusable trims or controls from the old cover to the new one, if applicable
• Set the new cover level, reinstall the glass and drawer(s), and verify smooth operation

This refrigerator pan cover assembly forms the shelf surface above a drawer and supports the drawer's movement. Replacing a damaged cover restores a level storage surface and smooth, reliable drawer alignment.

• Forms the flat shelf surface over a refrigerator drawer to securely hold items
• Supports and aligns the drawer so it opens and closes properly
• Restores stability if the original cover is cracked, bowed, or broken

• Disconnect power to the refrigerator before servicing
• Remove food items; slide out and remove the drawer beneath the cover
• Lift/tilt the damaged cover out; transfer any reusable components from the original cover if applicable
• Set the new cover in place and reinstall the drawer; verify smooth operation

Color: White

The Inverter Box is an OEM component specifically designed for Whirlpool French door refrigerators. Located inside the refrigerator compartment top behind removable panels, the inverter box houses electronic components that control the compressor motor and refrigeration systems.

Causes of a bad inverter box include failure of internal circuit boards over several years of regulating refrigeration cycles or damage from liquid spills inside the unit.  

Symptoms of a bad inverter box include:

• Failure of the refrigerator section to adequately cool and maintain temperatures
• Erratic fluctuations in cold air dispensing from vents     
• Repeated triggering of defrosting modes unnecessarily 
• Inability to regulate between freezer and refrigerator settings

This Whirlpool replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, and Kenmore side-by-side refrigerators.
 

The Air Damper is an OEM part for Whirlpool refrigerators. It is a component located inside the fridge behind the evaporator cover that controls the flow of cold air circulating throughout the fridge compartment. The damper opens and closes to direct air as needed to efficiently maintain set temperatures.

Symptoms of a bad air damper include:

• Inability to achieve or maintain proper fridge temperatures 
• Condensation buildup inside 
• Frosted evaporator cover
• Warm or cold spots in different areas of the fridge

Causes of a bad damper can be wear and tear of the movable parts over time, failure of the actuator motor that powers it, or damage from accidental blocking of the damper mechanism.

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Container is an OEM part for Whirlpool refrigerators. It is responsible for holding and dispensing ice from the icemaker into the dispenser chute.

The ice container ensures the proper storage and convenient access to ice whenever you need it. It is designed to provide a reliable ice storage solution.

A bad ice container assembly can occur due to wear and tear over time or damage to the container or its components. If you notice symptoms such as the ice not dispensing properly, leaks from the dispenser area, or a broken or cracked ice container, it may be time to replace this part.

Symptoms of a bad ice container include:

• Improper dispensing of ice
• Leaks from the dispenser area
• Broken or cracked ice container

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Glass Shelf is an OEM replacement part for Whirlpool refrigerators. As an adjustable interior organizer, it provides the surface for storage and visibility of items stored. 

Symptoms of a bad glass shelf can include:

• Cracks, chips or other physical damage that compromise its structural integrity
• Difficulty removing or replacing inside the fridge interior
• Potential leaks if damage penetrates the glass surface

Causes are usually due to repeated mishandling over the shelf's usable life or accidental impact events. 

This OEM Whirlpool replacement shelf is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Wire Harness is an OEM part for Whirlpool refrigerators. It is made up of bundled electrical wires that connect and transmit signals between different refrigerator components like lights, temperature controls, fans, and more.

Causes of a bad wire harness include short circuits due to damaged insulation, loose or disconnected wires, or wires breaking due to normal wear and tear over time.

Symptoms of a bad wire harness include:

• Lights or temperature displays not working properly
• Fans or other mechanical parts failing to run 
• Strange electrical smells or sounds coming from the refrigerator
• Components like icemakers or water dispensers malfunctioning

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Trim Panel is an OEM part for Whirlpool refrigerators. It provides an aesthetically pleasing facade that covers exterior refrigeration components and protects the insulation.  

Causes of a bad trim panel can include cracks, dents, or warping due to impacts over time. Normal wear and tear can also cause discoloration, chips, or peeling of protective coatings.

Symptoms of a bad trim panel include:

• Exposed insulation or refrigeration components behind damaged areas   
• Gaps that allow warm air to enter the refrigerator compartment
• Peeling or bubbling of protective coatings
• A trim panel that no longer attaches securely to the refrigerator

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore French door refrigerator models.