Wsr322fdam02 Parts

This drive coupler connects the washer motor to the transmission so the agitator or drum turns smoothly. It's a direct-replacement part that restores drive engagement when the original coupler is worn or damaged. What it does

• Transfers motor rotation to the transmission/agitator so the tub agitates or spins.
• Commonly replaced when the washer won't agitate, spin, or makes grinding or clunking noises.
• Resists normal wear from torque and repeated use; failure causes slipping or loss of drive.
• Helps prevent further damage to the motor or transmission when replaced at first signs of wear.

• One drive coupler

• Disconnect power and water supply before beginning any repairs.
• Access typically requires removing the cabinet or front panel; follow the manufacturer service manual.
• Inspect motor shaft and transmission input for damage when replacing the coupler.
• If transmission or motor splines are damaged, replace the damaged assembly rather than relying on a new coupler.

This evaporator fan motor drives the fan that circulates chilled air across the evaporator coils and through the cabinet, helping maintain even, stable temperatures and consistent cooling performance.

• Moves air across the evaporator coils and through the vents for uniform cooling
• Helps the refrigerator recover temperature after door openings
• Common symptoms of a failing motor: fresh food section warmer than the freezer, little or no airflow from vents, fan not running with the door switch pressed, or loud/abnormal fan noise
• Supports overall system efficiency by keeping air moving around stored items

• Disconnect power to the appliance before servicing
• Transfer and reuse the original fan blade, bracket, grommets, and screws if your model uses them
• Clear any frost or obstructions from the fan shroud and surrounding area before reassembly
• After reassembly, restore power and press the door switch to confirm the fan runs and airflow is present

The ice maker bracket is an OEM part for Whirlpool refrigerators. This bracket is a structural component that holds and supports the icemaker assembly within the refrigerator. It allows for secure mounting and installation of the icemaker while also maintaining proper alignment.

Causes of a bad bracket can include wear and tear over time, cracks or breaks due to impact or stress, or corrosion issues that compromise the integrity of the mounting structure.

Symptoms of a bad bracket include:

• Loose or unstable icemaker installation
• Improper ice production or dispensing
• Noise or vibrations emanating from the icemaker area
• Moisture leaks or water damage near the bracket mounting points

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Condenser Fan Motor is an OEM part for Whirlpool brand bottom-mount refrigerators. This motor powers the condenser fan which dissipates heat from the refrigeration system coils, maintaining cool interior temperatures.

Causes of failure include normal bearing wear from continuous rotations, or buildup obstructing free blade movement. 

Symptoms of a faulty motor include:  

• Elevated interior temperatures and frost propagation issues   
• Extended run times and higher energy consumption
• Grinding or buzzing noises emanating from the refrigeration system area

This Whirlpool replacement restores efficient heat removal and preserves food freshness. Compatible with KitchenAid, Maytag, and some Kenmore models too, it prevents future repair bills.
 

This door gasket creates a tight seal around the refrigerator door to keep cold air in and humid room air out. Replacing a worn gasket helps maintain proper temperatures and reduces condensation and frost at the door opening. What it does:

• Seals the door perimeter to limit warm air infiltration
• Helps keep interior temperatures stable for consistent cooling
• Reduces moisture and frost buildup near the door opening
• Replaces a gasket that is torn, warped, brittle, or won't seal properly

• 1 door gasket

• Disconnect power before servicing
• Remove the old gasket from the retaining channel; on some models, loosen retainer screws to release it
• Warm the new gasket in hot water or with low heat to relax folds; seat corners first, then press fully into the channel all around
• Close the door to check for even contact; adjust door alignment if needed and allow up to 24 hours for the gasket to conform

The Evaporator Coil is an OEM part for Whirlpool refrigerators. It is responsible for absorbing heat from the refrigerator interior as refrigerant passes through its fine tubes and fins. Cool air is then circulated through convection to maintain consistent temperatures.

Causes of a bad evaporator coil can include mineral deposits or frozen moisture clogging fins over time, physical damage to tubes, or corrosion of metal surfaces.

Symptoms of a bad evaporator coil include:  

• Inability to decrease interior temperatures sufficiently  
• High energy bills due to inefficient heat transfer
• Abnormal ice buildup inside due to poor airflow
• Warm or lukewarm areas inside the refrigerator compartment

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, KitchenAid, and some GE models.

PLEASE NOTE: Due to manufacturer changes, the auger is now metal

This replacement gasket seals the appliance door to help maintain proper temperature and prevent leaks, keeping the interior efficient and protected. Use it to restore a tight door seal and reduce energy loss from gaps. What it does:

• Forms a secure seal around the door to keep heat or cold inside the appliance
• Prevents water, steam, and air leaks that can cause poor performance or messes
• Helps maintain consistent internal temperature for efficient operation
• Reduces cycling and energy waste caused by a damaged or worn seal

• One replacement gasket

• Disconnect power and empty the appliance before starting any repair
• Inspect the door frame and mounting channel for damage or debris before installing
• Install by seating gasket evenly into the channel or following the OEM mounting clips/adhesive method

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This 30-inch toe grille restores the finished look at the bottom front of a range or oven while protecting the lower cabinet area from debris. It's a direct-fit exterior trim piece that keeps the appliance appearance clean. What it does:

• Covers and protects the appliance lower front, hiding components and braces.
• Restores a damaged, missing, or dented kickplate to improve the appliance's appearance.
• Helps prevent debris buildup under the appliance and reduces visible gaps.
• Stops rattling or loose trim caused by broken or warped grille pieces.

• High-level replacement: typically installs from the front and secures with clips or screws.
• Disconnect power and move the appliance per the manufacturer instructions before doing any service that requires pulling the unit forward.
• Wear gloves to protect hands and avoid scratching the grille finish during installation.
• Retain or reuse original fasteners when possible; obtain OEM replacement hardware if fasteners are missing.

The Drain Tube is an OEM part for Whirlpool-brand French door refrigerator water dispensers and ice makers. It channels excess water away during the icemaking process. 

Causes of a bad drain tube can include mineral buildup clogging the narrow opening over time or cracks developing from rigid ice contact every cycle.

Symptoms of a bad drain tube include:

• Water failing to properly drain away from the ice maker
• Puddles or leaks appearing near the freezer floor   
• Ice production deteriorating due to water backup
• Mineral scale deposits accumulating around connections

Replacing it with this OEM tube restores full water ejection to produce clean ice. Also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators.

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

This genuine replacement door hinge restores proper door alignment and smooth pivoting on compatible refrigerators, helping doors close fully and maintain an even seal for optimal cooling. What it does:

• Supports and pivots the refrigerator door so it opens and closes smoothly
• Keeps door aligned to prevent sagging, rubbing, or uneven gaps
• Helps maintain a tight seal to reduce cold air loss and improve efficiency
• Stops door from binding or catching when opening

• Disconnect power to the appliance and empty or support the door before beginning.
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage.
• Tighten mounting hardware securely but do not overtighten; follow OEM torque guidance if available.

This crisper pan replaces the plastic pan that supports and contains the refrigerator crisper drawer, helping keep produce organized and containing spills for easier clean-up. Fits into the lower fresh-food compartment crisper area. What it does:

• Supports the crisper drawer so fruits and vegetables slide smoothly and stay level
• Contains leaks or spills from stored produce to protect the cabinet below
• Restores proper spacing and alignment for the crisper drawer to operate correctly
• Helps maintain an organized storage area for fresh produce

• One crisper pan

• Remove all food and the crisper drawer before installing the pan
• Slide the pan into the crisper cavity until it rests securely on the supports
• Inspect support rails and guides for damage; replace if worn to ensure proper fit
• Handle carefully to avoid cracking plastic; use gloves if needed and clean before returning food