Wtw4000bq Parts

Color: White

The Washer Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, opening and closing to allow the correct amount of hot and cold water into the machine during different stages of the wash cycle.

Causes of a bad water inlet valve can include wear and tear over time, sediment build-up, or damage from high water pressure. These issues can cause the valve to malfunction, leading to improper water levels or no water entering the machine at all.

Symptoms of a bad water inlet valve include:

• Washer not filling with water
• Slow fill or no water flow
• Water leaking from the valve area
• Inconsistent water temperature during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This small mounting screw secures the appliance's timer to its bracket or control console. It replaces missing or stripped hardware to keep the timer stable, properly aligned, and operating smoothly when you turn the control knob.

• Fastens the timer assembly securely to its mounting bracket or console
• Prevents shifting and vibration that can make the control feel loose or wobbly
• Helps maintain proper alignment of the timer shaft/knob
• Ideal replacement when original hardware is missing or threads are damaged

• Disconnect power before servicing; shut off gas if applicable
• Access the control console and support the timer while removing/reinstalling hardware
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening into plastic or thin metal
• Replace screws one at a time to keep the timer aligned

This is an electronic control board that is made for use with washing machines. It is an internal component that ensures the washing machine operates correctly. The electronic control board monitors sensors throughout the appliance to ensure wash and spin speeds, drain and fill time, and water temperature is regulated. It also carries out user commands for washing machine cycle preferences.If the electronic control board has failed or gone bad, it can cause several problems. The washer may not spin, drain, fill, or even start a cycle. If it's determined that the problem is related to the electronic control board, it will need to be replaced. Unplug the washer and check the wire connections on the electronic control board. If they are fine, the electronic control board needs to be replaced. A putty knife, nut driver, and flat screwdriver will be needed. Remove the knob, open the console, and disassemble the main control board to remove it. Install the new replacement part and reassemble.This authentic OEM part is made for washing machines manufactured by Whirlpool. The component comes directly sourced from the manufacturer, and it is sold as a single part.

This pressure switch senses drum water level and tells the washer control when to stop filling — helping prevent overfills and ensuring correct wash cycles. It's a direct-replacement electrical switch assembly used on compatible Whirlpool washers. What it does:

• Detects water/pressure inside the washer tub and signals the control board when the correct level is reached
• Stops the fill valve when the required water level is reached to prevent overfilling
• Can cause no-fill, overfill, or incorrect cycle behavior when faulty
• Works with the machine's control logic to enable proper agitation and drain timing

• One water level pressure switch (3-terminal) as pictured

• Disconnect power and shut off the water supply before servicing
• Note hose routing and connector orientation before removal to ensure correct reassembly
• Gently remove and attach the small pressure hose to avoid kinking or damage to the diaphragm

Color: White. Size: 1 qt. can. Acrylic appliance paint.