Wtw6100sw1 Parts

The User Control and Display Console is an OEM part for Whirlpool washing machines. It houses the digital display and membrane buttons that allow for cycle and setting selection. As the interface constantly subjected to touch during use, this console can show normal wear like faded graphics or non-responsive buttons over time.

Causes may include extended use wear from repeated cycling as well as occasional moisture exposure inside the console.

Symptoms of a faulty console include:

• Cycle or temperature buttons not responding
• Unreadable or blank display screen
• Inability to scroll through options

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This lower wiring harness connects the washer's VMax 2.0 drain pump to the lower control components, restoring reliable electrical connections for proper pump operation and consistent drain cycles. What it does:

• Routes power and signal between the VMax 2.0 drain pump and the washer's lower control assembly.
• Replaces frayed, pinched, or damaged wiring that can cause the pump to run intermittently or not at all.
• Helps resolve symptoms such as no-drain conditions, intermittent pumping, or pump-related error codes.
• Matches original connector ends and routing to fit the factory wiring path.

• Disconnect power to the appliance before attempting any repairs.
• Access the harness by removing the washer's appropriate access panels per the service manual.
• Follow the original wire routing and fully seat all connectors; avoid pinching or stretching the harness.

Size: .20 Fl. Oz. (6 ml)

Screw: 8-16 x 3/8 inch.

Replacement flexible hose that routes water inside your appliance, restoring secure flow and helping prevent leaks or drainage problems caused by cracked, kinked, or worn hoses. What it does:

• Directs water to and from appliance components during normal operation.
• Prevents leaks when hose walls and fittings are intact.
• Common symptom fix: visible leaks, water pooling beneath the appliance, or reduced/irregular water flow.
• Fits in-line with existing clamps and fittings to maintain proper routing.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect and replace clamps or fittings if corroded or damaged; use proper-size clamps for a secure seal.
• Route hose without sharp bends or kinks and avoid contact with hot surfaces or moving parts.

Replace aging or leaking washer supply lines with this fill hose kit. It provides two 5-foot hoses to connect your home's hot and cold water valves to the washer, helping maintain a secure connection and consistent filling.

• Connects hot and cold water faucets to the washer's inlet valves
• Replace if hoses are leaking, cracked, bulging, or kinked
• Can help address slow filling caused by restricted or kinked hoses
• Useful when installing or relocating a washer

• Unplug the washer and shut off both water supply valves before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucet and washer
• Match hot to hot and cold to cold; hand-start threads to avoid cross-threading, then tighten firmly without overtightening
• Restore water and power; run a fill test and check all connections for leaks

This fill hose carries water from the home supply to the appliance inlet valve, restoring proper water fill and helping prevent leaks when the original hose is cracked, worn, or blocked. Ideal for replacing damaged inlet lines. What it does:

• Delivers water from the household supply to the appliance inlet valve for normal fill cycles.
• Replaces cracked, split, or deteriorated hoses that can cause leaks at connections.
• Resolves symptoms such as slow or no water fill, visible leaks, or intermittent filling.
• Durable replacement designed to match OEM routing and connection points.

• Always shut off water supply and disconnect power before starting work.
• Inspect and replace hose clamps or inlet gaskets as needed; ensure proper seating to prevent leaks.
• Hand-tighten fittings and secure clamps—avoid overtightening metal fittings.
• After installation, restore water and power and run a short fill cycle while checking for leaks.

The Power Cord is an OEM part for Whirlpool washing machines. It delivers electrical power from the wall outlet to internal components inside the washer cabinet. Made of insulated copper wiring housed within a tough flexible jacket, this cord prevents shocks and ensures reliable power delivery.

Causes can include normal wear over many machine cycles. Rodent chewing, cracking from overly tight bends, or cuts from sharp metal edges are also possible.

Symptoms of a failed power cord include:

• No power to washer control board or motor
• Tripped breaker after plugging washer in
• Bare or frayed copper wiring exposed
• Brittle, cracked cord jacket

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

5 foot. Package of 2.

This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does

• Fastens trim, panels, brackets, or internal assemblies to keep parts secure
• Helps stop vibration-related noise from loose components
• Restores correct mounting where the original screw is missing or damaged
• Matches the form and fit of the OEM fastener for intended attachment points

• One replacement 7-2-1 screw

• Use the correct driver to avoid stripping the screw head
• Hand-start threads before tightening to prevent cross-threading
• Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
• Disconnect power to the appliance before accessing internal areas

This fill hose carries incoming water from the inlet valve to the washer tub so your machine fills when a cycle starts. It replaces a worn, cracked, or leaking hose to stop water loss and restore normal fill function. What it does:

• Directs water from the inlet valve to the washer tub during fill cycles.
• Stops leaks caused by cracked, split, or perished hose material.
• Helps resolve slow or no-fill symptoms when the valve and plumbing are functioning.
• Prevents water pooling or floor damage from a failing hose.

• One fill hose

• Disconnect power and shut off the home's water supply before starting.
• Inspect hose ends and clamps; use original-style clamps or replace if corroded.
• Route hose without sharp bends or kinks and secure per the washer's routing path.
• After installation, restore water and power and run a short cycle to check for leaks.

This flowmeter monitors incoming water flow and sends the signal the washer's control needs to time and advance cycles correctly. Replacing a faulty flowmeter restores accurate water sensing and cycle performance. What it does:

• Measures water entering the appliance and converts flow into an electrical signal for the control board.
• Helps the washer detect and control fill volume and cycle timing.
• Common symptom: washer stalls, won't advance, or displays water/flow-related error codes.
• Common symptom: improper fill levels or unusually long fill/drain steps.

• Disconnect power and shut off the water supply before starting.
• Handle electrical connectors and tubing carefully; avoid crushing or kinking hoses.
• Reconnect wiring and hoses securely and test for leaks before completing the repair.

This replacement control knob restores a secure, easy-to-use grip for turning stove or oven controls so you can set temperatures and burners reliably. It replaces a worn, cracked, or missing knob to restore normal control operation. What it does:

• Provides a firm grip and clear pointer for adjusting oven or cooktop controls
• Replaces cracked, stripped, loose, or missing knobs that won't engage the control shaft
• Helps prevent accidental changes by fitting snugly on the valve or shaft
• Restores tactile feedback for accurate temperature or burner selection

• One control knob

• Disconnect power (or turn off gas supply) and ensure controls are cool before replacing
• Pull the old knob straight off the control shaft; align the new knob and push on until fully seated
• If knob is tight or stuck, gently wiggle while pulling; do not use excessive force or metal tools that could damage the shaft

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal