Zbd0700n2011 Parts

3 digit

This float dome sits in the dishwasher's float well and rises with the water level to trigger the float switch and stop filling. Replace a cracked or missing dome to restore reliable water-level control and overfill protection.

• Moves up and down with the water level to actuate the overfill/flood switch
• Helps prevent overfilling by signaling the inlet valve to shut off at the correct level
• Guides and shields the float mechanism from dishes and debris
• Common symptoms: broken or missing dome, float sticking, dishwasher won't fill or keeps filling

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the float area on the tub floor
• Lift straight up or twist to remove the old dome; clear any mineral/debris from the float well
• Seat the new dome and run a brief fill test

This water inlet cover replaces a cracked or missing inlet-valve trim to protect and conceal the appliance's water inlet area. It restores a finished look while keeping hoses and valve components shielded from debris. What it does:

• Covers and protects the water inlet valve and hose connections from dust and impact
• Conceals exposed hoses and wiring for a cleaner rear-cabinet appearance
• Helps prevent snagging or accidental contact with the inlet valve assembly
• Reduces debris buildup around the inlet area that can affect connections

• Disconnect power to the appliance and shut off the water supply before starting.
• Usually fastens with a few screws or clips—have a screwdriver or nut driver ready.
• Align cover over the inlet valve area, then secure with the original fasteners.
• After installation, turn water and power back on and inspect connections for leaks.

This tub light lens is the protective cover for the dishwasher's interior light. It shields the light housing from moisture and soil while diffusing illumination, restoring safe, bright visibility inside the tub.

• Protects the tub light assembly from water and food soil inside the dishwasher
• Diffuses interior lighting for better visibility when loading and unloading
• Replace if the lens is cracked, deformed, yellowed, or missing
• Common symptoms include an exposed light, moisture inside the light housing, or dim/uneven lighting in the tub

• Disconnect power at the breaker before servicing the dishwasher
• Open the door, locate the tub light, and remove the existing lens by releasing its retaining screw(s) or tabs
• Seat the new lens evenly and secure it; reuse the original fastener(s) if applicable
• Restore power and verify the interior light operates correctly

This mounting nut secures the tower heater assembly in the appliance, keeping the heater stable and properly positioned for safe, efficient operation. Replacing a damaged nut restores secure attachment and reduces rattling or loose components. What it does

• Secures the tower heater assembly to the appliance chassis or mounting bracket
• Helps maintain proper heater alignment for reliable heating performance
• Prevents movement that can cause noise, intermittent contacts, or wear on connections
• Used when the original nut is stripped, corroded, or missing

• One tower heater assembly mounting nut

• Disconnect power to the appliance before attempting any repair
• Use appropriate hand tools; avoid over-tightening which can strip threads or damage the heater assembly

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.

Right hand side

Right hand side

Specs: 6-19 pl flp 3/4 s

Specs: 10-32 gxtt flp.59

A replacement gasket that seals the tub light housing to help keep moisture and debris out of the light assembly, preserving illumination and helping prevent premature bulb or socket issues. What it does

• Seals around the tub light housing to block moisture and contaminants from entering the light cavity.
• Helps maintain reliable lighting by protecting the bulb and socket from corrosion and residue.
• Reduces risk of light failures or flicker caused by water intrusion or buildup.
• Restores proper fit and alignment of the light housing after a worn or damaged seal is removed.

• One tub light gasket

• High-level replacement: generally accessible from inside the tub/light housing once the light bezel or cover is removed.
• Disconnect power before starting work to avoid shock or accidental activation of the light.
• Inspect the light housing and mounting surfaces; clean residue before installing the new gasket for the best seal.

Left hand side