Solenoid Parts

Once I was convinced that the water supply and filter wasn't the problem, I took the back protective panel and looked at the valve assembly. It looked corroded, especially on top where the ?pistons for the solenoids?would project into. I ordered the part and it was on my doorstep in TWO days...really fast. The part was slightly different from the one that I was replacing in that the part was "angled out." This was not a problem. All that did was tilt the fitting for the copper water line... Read more

• Leaking
• Ice maker not making ice
• Not dispensing water
• Ice maker dispenses too much ice

I have a Samsung fridge and I had a problem were low pressure water kept coming out of the dispenser and would not stop. At first I thought it was the dispenser switch until I read reviews on the App Pro sight and the issue pointed to the water valve. I ordered the part from App Pro (very quick delivery) installed the new water valve in 15 minutes. Turned water back on plugged fridge back in wall and problem solved. Water dispenser working normally. (part DA62-00914B) Read more

Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more

Ordered the conversion kit Read more

Replaced solenoid valve. Repair summary: Turn off H/C water supply, disconnect hoses. Unscrew 3 screws rear of main panel. Slide front panel laterally then pull up to remove. Unscrew 2 screws on solenoid valve part. Disconnect spade electrical connectors and remove defective part. Insert new part and do everything I just said in reverse. It was so easy a drunken monkey could have done it. Read more

• Will not fill with water
• Will not drain

Put in the new parts and now it does not leak anymore. Very simple Read more

I wanted to only mess with the washer in a single 30-minute session. So, I assumed both solenoid valves were leaking and purchased replacements. It was a simple project, as well as a good chance for my 13-year-old son to accomplish something practical. Steps/tools used, in order: STEP/TOOL 1: Pull the washer electrical plug from the wall; no tools needed. STEP/TOOL 2: Shut off the hot and cold supply hose valves in the wall; no tools needed. STEP/TOOL 3: Unscrew the hot and cold water female... Read more

I replaced the water valve. Read more

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

I've never repaired an appliance before, but wanted to try to at least diagnose the problem before calling a professional. I started with Google searches to explain why water wasn't going in. First checked the water supply and verified it was OK. The next most likely problem was the inlet valve. I watched a bunch of YouTube videos on how to replace this part, decided I should be able to do it myself, and found that the part was under $30. To test my ability, I removed the existing part &... Read more

Ordered the and part fixed it myself. Read more

• No hot or cold water
• Will not stop filling with water
• Will not fill with water
• Leaking

This is my third repair of this type. The first was a stand-alone washer and was very easy, because there was a plate on which the inlet valve assembly was mounted, and it was easily removed. This repair was on a Frigidaire stacked washer/dryer (laundry center). Stacked washer/dryers are typically purchased to save space and are often tucked into a closet. Be sure you can pull it out to access both front and rear. Remove drain hose from drain, detach water hoses, electricity and dryer vent... Read more

Replaced the part. Read more

The Cold Water Inlet Valve had a very good You Tube Video and I followed it. One note of caution, as I chuckled at the guy on the video saying watch for sharp edges, he was correct. When removing one of the lines from the valve, my pliers slipped and my elbow hit the front of the machine(inside edge) and cut my elbow. So after that I draped the edges with towels to avoid that happening. Again the fix was easy and very straight forward from the video. No extra pearls of wisdom here. Total... Read more

The hot inlet valve was dripping water, replaced it. Water and soap were coming out of the vent pipe. The new Float assembly had a shorter shaft than the old Float Assembly I was replacing. I did install the new Float Assembly and cleaned the vent hose where the float seats and I haven't seen any more water on the floor. Both repairs were made easy by watching your repair videos. Read more