Control Knob Parts

This replacement control knob restores smooth, accurate adjustment of your appliance's settings when the original is worn, cracked, or missing. Get a secure grip and the original look with a direct-fit knob that installs in seconds.

• Presses onto the control stem to actuate the underlying switch or valve
• Fixes knobs that are stripped, loose, wobbly, hard to turn, or missing
• Helps when the pointer no longer aligns with settings or the knob spins freely
• Direct-fit design maintains the original feel and operation

• Unplug the appliance or switch off power at the breaker before servicing
• Pull the old knob straight off; avoid bending the control shaft
• Align the new knob's insert with the flat/key on the stem and push fully into place
• Verify smooth rotation and proper engagement of the control

This control knob lets you select settings on your appliance. Replacing a worn or missing knob restores smooth, reliable control and a finished look to the front panel. What it does:

• Attaches to the control shaft to adjust appliance settings
• Restores positive engagement when the original knob is cracked or stripped
• Helps ensure accurate, repeatable adjustments
• Common symptoms: knob broken, loose, missing, or spins without turning the control

• Includes 1 control knob

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the shaft; avoid prying on the control panel
• Align the new knob's hub with the shaft and press firmly until fully seated
• Verify smooth rotation and proper engagement before returning the appliance to service

Color: black. Measures about 2 inches in diameter.

This replacement surface burner control knob restores a clean, precise feel to your range controls so you can set heat levels confidently. Ideal for replacing a cracked, stripped, or missing knob.

• Attaches to the burner valve or switch stem to select heat settings
• Common symptoms: knob wobbles, cracks, slips, or won't stay aligned with settings
• Restores accurate pointer alignment and consistent turning feel
• If the stem itself is damaged, the underlying valve/switch may also need service

• Turn the appliance off and allow all surfaces to cool
• Pull the old knob straight off the stem—do not pry against the panel
• Align the new knob with the stem and press straight on until fully seated at Off
• Rotate through all settings to confirm smooth operation

This control knob installs on the control stem so you can select settings on your appliance. Replacing a cracked or missing knob restores smooth, accurate control and a clean, finished look.

• Attaches to the control stem to operate the underlying switch or valve
• Lets you choose temperature, burner, cycle, or function as designed
• Common symptoms: cracked or stripped hub, knob falls off, spins without engaging
• Restores proper feel, positive engagement, and clear position indication

• Disconnect power; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the stem—do not pry against the panel
• Align the new knob with the stem and press on until fully seated
• If present, transfer any reusable insert/clip from the old knob; replace the control if the stem is damaged

This bezel is a small trim piece that finishes an opening on the appliance's control area. It restores a clean, factory look and helps protect the underlying panel when the original is cracked, loose, or missing.

• Frames the control opening for a finished appearance
• Helps shield panel edges from wear and debris
• Typical symptoms: cracked plastic, broken tabs, discoloration, loose or missing trim

• Disconnect power and allow the appliance to cool before servicing
• Remove any adjacent knob or trim as needed for access
• Release the old bezel's tabs or screws and note its orientation
• Install the new bezel in the same position, then reinstall removed parts and test

Color: chrome. Measures about 1 inch in diameter.

This genuine replacement control knob attaches to the control shaft on your appliance so you can turn and set functions as intended. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, factory look.

• Couples to the control stem to select settings and adjust levels
• Restores proper grip and turning action when the original is worn or broken
• Common symptoms it can address: knob cracked or missing, loose or slipping, won't turn the control, stripped insert
• Note: If the underlying control stem/shaft is damaged, additional parts may be required

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the stem; avoid prying that could damage the shaft
• Align the new knob with the flat/indicator on the stem and press firmly into place
• Verify smooth operation and correct pointer alignment before use

The Push Button Set is an OEM part for Bosch dishwashers. It includes all buttons needed for cycle selection and temperature adjustments on the control panel.

Causes of a bad push button set can include wear from frequent use, moisture exposure compromising electronics, or physical damage from impact or other mishandling.

Symptoms of a bad push button set include:

• Buttons sticking, failing to depress properly, or malfunctioning entirely
• Inability to scroll through cycles or alter wash settings
• Control panel lights/display malfunctioning or unresponsive

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A replacement control knob for compatible Frigidaire-made ranges and cooktops. It restores a secure, readable control so you can set burner or oven settings reliably when the original knob is worn, cracked, stripped, or missing.

• Attaches to the control valve or switch shaft to select heat and temperature settings
• Replaces cracked, loose, or missing knobs that slip, wobble, or fall off
• Restores proper alignment with the control panel markings
• Common symptoms: knob spins without engaging, broken insert, hard-to-turn or misaligned control

• Unplug the appliance; for gas units, also shut off the gas supply
• Pull the old knob straight off the control shaft—do not pry sideways
• Align the flat/keyed side of the new knob with the shaft and press on firmly until fully seated
• Verify smooth rotation and correct pointer alignment before use

This control knob replaces a worn or broken knob on your range or cooktop, restoring smooth, accurate control of the burner. It fits onto the valve stem so you can select heat settings with proper alignment and feel.

• Turns the burner valve stem to choose OFF/LOW/HIGH and intermediate settings
• Replaces cracked, stripped, loose, or missing knobs
• Restores proper alignment and positive engagement when turning
• Symptoms include wobbling, spinning without engaging, or difficulty adjusting heat

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off the valve stem; align the new knob with the stem flat and press straight on until fully seated
• Do not pry on or twist the valve stem; avoid using tools on the stem
• After installation, verify the knob points to OFF correctly and engages each setting

This replacement control push button restores a clean, responsive press on the control panel when the original is cracked, missing, or sticking, so you can reliably actuate the switch beneath it.

• Interfaces with the underlying switch/rocker on the control panel to select functions
• Provides the tactile surface for choosing settings, depending on model
• Helps maintain proper alignment and travel for consistent operation
• Typical symptoms: cracked or missing cap, sticking/binding, wobbly feel, won't stay seated

• Disconnect power at the breaker before servicing any controls
• Access the control panel and note the button's orientation before removal
• Release bezel/retaining tabs and remove the old button; transfer any clips if present
• Seat the new button on the switch stem, reassemble, and test operation

This control knob replaces a worn or missing knob on your range or cooktop. It attaches to the control stem so you can reliably select heat or temperature settings and restore smooth operation with a clean, finished look.

• Mounts on the control stem to turn the burner or oven control
• Restores positive engagement when the original knob is cracked, stripped, loose, or missing
• Helps ensure smooth turning and proper indexing of settings
• Common symptoms: knob slips or falls off, hard to turn, damaged or missing knob

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control stem; avoid prying on the panel
• Align the new knob with the stem and press it on fully until seated
• Verify smooth operation and that the indicator aligns with settings

Color: white. Measures about 2 inches in diameter.

Color: Black. Measures about 2 inches in diameter. For biscuit use WP98008208. For white use WP98006102. Sold individually.

Color: Black   power burner knob