Zoneline Heater Parts

This 3000-watt, 4-pass broil element provides the intense top heat your oven needs for searing and browning. Replace a burned-out top element to restore consistent broil performance.

• Supplies direct, high heat from the top of the oven during Broil
• Common fix for no heat in Broil mode
• Helps resolve weak or uneven browning from the top
• Replace if the element is blistered, cracked, or arcing

• Disconnect power at the breaker and allow the oven to cool completely before servicing
• Remove mounting screws, gently pull the element forward to access wires, and transfer connections one at a time
• Support the element and avoid flexing it; ensure terminal insulators/boots are intact
• Reinstall with existing hardware, secure connections, and test the broil cycle

The Surface Element is an OEM replacement part for Whirlpool ranges and cooktops. Specifically designed for the 7" cooktop element, the entire body of the Surface Element measures approximately 8" in diameter. It generates and distributes heat evenly across the cooktop.

Causes of a bad Surface Element can include electrical issues, such as wiring problems or a malfunctioning switch, and physical damage or wear that impairs its heating capability.

Symptoms of a bad Surface Element include:

• Inconsistent heating or failure to heat
• Visible damage to the element, such as burns or breaks
• The element not responding to the control switch
• Uneven cooking results due to fluctuating temperatures

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Heating Element is an OEM part for Whirlpool dryers. This part generates the heat necessary to dry clothes during the drying cycle. The element is designed to heat up when electricity passes through it, producing the warmth required to effectively dry laundry.

Causes of a bad heating element include wear and tear over time, electrical issues such as short circuits or power surges, and physical damage from overloading the dryer or mishandling the appliance.

Symptoms of a bad heating element include:

• The dryer not producing heat
• Clothes taking longer to dry than usual
• The dryer overheating or shutting off mid-cycle
• Unusual noises or burning smells during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Restore dependable oven heat with this lower bake element. Replacing a burned-out bottom element helps your range preheat properly and bake or roast evenly, eliminating long preheat times and no-heat conditions.

• Supplies the primary heat from the bottom of the oven during Bake
• Typical failure symptoms: no heat in Bake mode, long preheat times, uneven baking, visible cracks or blisters on the element, or tripping the circuit breaker
• Replacing a failed element restores consistent, reliable oven temperatures

• Disconnect power at the breaker and allow the oven to cool completely
• Remove oven racks; take out the element's mounting screws; gently pull the element forward to access wires
• Move one wire at a time to the new element; prevent wires from slipping back into the rear panel
• Re-secure the element, ensure it isn't contacting the cavity, restore power, and test Bake

Female spade connection. For male spade connection use part number WP74003019.

The Surface Element is an OEM part for Whirlpool ranges. This part provides heat to the cooking surface, allowing for the preparation of food. 

Common causes of a bad surface element include electrical faults, physical damage from heavy cookware, or degradation from constant heating and cooling cycles.

Symptoms of a bad surface element include:

• Inconsistent or uneven heating
• The element not heating up at all
• Visible damage such as burns or breaks in the coil
• Sparking or unusual noises when the element is turned on

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Bake Element is an OEM part for Whirlpool ranges. This part provides the necessary heat for baking by generating and distributing even heat throughout the oven cavity. It is located at the bottom of the oven and is essential for achieving consistent baking and roasting results.

Causes of a bad bake element can include regular wear and tear, electrical faults, or damage from spills and residues.  

Symptoms of a bad bake element include:

• The oven not heating up or taking longer to reach the desired temperature
• Uneven baking or roasting results
• Visible damage or burn marks on the element

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Bake Element is an OEM replacement part for GE electric ranges. It is located at the bottom of the oven cavity.

Causes of a bake element malfunctioning include wear over time, overheating due to blocked airflow, or damage from impact or explosion.

Symptoms of a bad bake element include:

• Long preheat times or oven not reaching temperature
• Baking/cooking results not uniform
• Hot/cold spots inside oven cavity
• Burned or undercooked foods

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Range Oven Triple Surface Element is an essential component for maintaining the performance of your range oven. This genuine OEM part ensures reliable and efficient heating, allowing you to cook your meals evenly every time. Designed specifically for Samsung range ovens, it guarantees a perfect fit and seamless integration with your appliance. The triple surface design provides versatile cooking options, whether you're baking, broiling, or roasting, giving you greater control over your culinary creations. Installing this heater radiant-triple is straightforward, helping you restore your ovenGÇÖs functionality quickly without the need for professional assistance. By choosing the Range Oven Triple Surface Element , you invest in durability and consistent performance, ensuring your range oven operates at its best for years to come. Enhance your cooking experience with this high-quality genuine OEM part, tailored to meet the standards of Samsung appliances and deliver exceptional results in your kitchen.

The Surface Heating Element is an OEM part for Whirlpool cooktops and ranges. It provides the heat necessary for cooking. This element is designed to deliver consistent and even heat distribution, ensuring your cooking results are optimal every time.

Causes of a bad surface heating element can include wear and tear from regular use, damage due to spills or impacts, and electrical issues such as short circuits or burned-out connections.  

Symptoms of a bad surface heating element include:

• The element not heating up or taking longer to heat
• Inconsistent heating or hot spots
• Visible damage or burns on the element
• The element not responding to temperature controls

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a dual radiant surface element for a smoothtop range. It restores reliable heating on one burner position with adjustable small/large cooking zones for better control and even heat on compatible glass cooktops.

• Heats cookware using two selectable zones (small or full) to match pan size
• Replaces a worn or non-heating burner element on the cooktop
• Common symptoms: element won't heat, only one ring heats, uneven heating, or cycling off too soon
• Helps resolve tripped-limiter behavior caused by a failing element assembly

What's included: One dual radiant surface element assembly Install notes:

• Disconnect power before servicing; surface elements are high-voltage components
• Lift or remove the cooktop to access the element
• Transfer any mounting brackets and reconnect wires to the same terminals
• Avoid touching the radiant surface; handle by the frame to prevent damage

The Heating Element Assembly is an OEM part for GE dishwashers. This part heats the air during the drying cycle, ensuring that dishes come out dry and free of water spots.

Causes of a bad heating element can include mineral buildup from hard water, electrical issues such as a short circuit or faulty wiring, or general wear and tear over time that leads to reduced efficiency or failure.

Symptoms of a bad heating element include:

• Dishes remaining wet after the drying cycle
• The dishwasher not heating up during the drying phase
• The drying cycle taking longer than usual or not completing
• Error codes related to drying issues displayed on the control panel

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Refrigerator Water Tank Heater is an essential component for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is specifically designed to ensure that the water tank operates efficiently, providing a reliable supply of filtered water and ice. Crafted with precision, the heater helps prevent the formation of ice buildup within the tank, ensuring smooth water flow and consistent temperature control. Compatible with a wide range of Samsung refrigerator models, this water tank heater guarantees a perfect fit and seamless integration with your appliance. Installing this part is straightforward, allowing you to restore your refrigeratorGÇÖs functionality quickly and effectively. By choosing the Refrigerator Water Tank Heater , you invest in durability and reliability, enhancing the longevity of your fridge and ensuring a continuous supply of fresh water. This genuine OEM part not only supports the efficiency of your refrigerator but also contributes to a hassle-free user experience, making it a smart choice for any DIY appliance repair project.

The Surface Element is an OEM part for GE ranges. This element is responsible for providing the heat needed for cooking on the stove's cooktop. It heats up when the control knob is turned on, allowing you to cook food in pots and pans placed on the cooktop. 8 inch element. For 6 inch element use part number WB30X218

Causes of a bad surface element can include regular wear and tear, damage from excessive heat, or electrical malfunctions. 

Symptoms of a bad surface element include:

• The element not heating up at all
• The element heating unevenly or intermittently
• Visible damage such as burn marks or deformities
• Sparks or electrical shorts when the element is turned on

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bake Element is an OEM replacement part for GE electric wall ovens and ranges. It is the heating coil responsible for the bake function. The bake element generates precise, consistent heat through an electrical current to provide reliable and efficient baking.

Causes of a bad bake element can include mineral or liquid deposits baked onto the coils over time reducing heating effectiveness, or physical damage such as cracks or breaks in the coils.

Symptoms of a faulty bake element include:

• Inadequate or uneven baking temperatures
• Extended baking times needed to cook foods
• Portions of the oven or bake racks getting hotter than intended areas
• The bake function not working at all or creating only minimal heat

This OEM GE part is also compatible with Hotpoint, Sears Kenmore, and some RCA wall oven models.

The Radiant Surface Element is an OEM part for Frigidaire ranges and cooktops. This part generates heat for cooking and boiling on the cooktop surface.

Causes of a bad Radiant Surface Element can range from electrical issues or loose connections to physical damage from impact or spillovers.  

Symptoms of a faulty Radiant Surface Element include:

• Element not heating up or providing insufficient heat
• Element glowing unevenly or only partially heating
• Cracks or damage visible on the element surface
• Burning smells or discoloration on the cooktop

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.