Control Knob Parts

This knob assembly is a genuine OEM replacement part that is found on range hoods. The knob is used to turn the power off and on to the fan and light. This knob is made of durable plastic, but it may crack and break over time. If this happens, it isn't easy to turn the shaft to the off and position that powers the fan and light. When the knob is damaged, it should be removed and replaced with a new one. Tools are not required to remove and replace the knob. To start, disconnect the range hood from the outlet or turn off the breaker. Grasp it tightly and pull hard. The knob will pop off. Line the new knob up with the slot and push it in place. Restore the power to the range hood.This knob assembly is a black plastic molded part sold individually. It is designed for range hoods manufactured by General Electric.

The Top Burner Control Knob is an OEM part for Whirlpool ranges and cooktops. This part is crucial for the precise control of the heat output from the burners, allowing users to adjust the flame or element temperature accurately. It fits directly onto the stem of the burner switch, providing a tactile interface for easy operation. 

Causes of a bad Top Burner Control Knob can include cracking, melting, or fading from exposure to heat or aggressive cleaning, as well as internal damage that can prevent the knob from engaging with the burner switch correctly.  

Symptoms of a bad Top Burner Control Knob include:

• Difficulty in turning the knob or a lack of resistance which indicates a failure to engage with the burner switch.
• Visible damage such as cracks, warping, or melting that interferes with function.
• Faded or worn labels that make it difficult to see the settings.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Knob, blk (cvs)

The Control Knob is an OEM part for Bosch ranges and cooktops. As the interface regulating gas flow, control knobs activate precise burner levels through internal calibration.

Causes of failure include loosened set screws beneath allowing knob slippage. Prolonged heat and moisture exposure may also degrade contact surfaces over time.

Symptoms of faulty knobs include:

• Burners failing to engage or not matching dial settings
• Inability to decrease output levels from full flame
• Knobs wobbling insecurely or detaching entirely

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Knob is an OEM part for Frigidaire ranges. This component allows users to control the heat levels of the burners or the oven by turning the corresponding control shaft. It ensures precise adjustments for cooking and baking.

Over time, the knob can wear out or break due to frequent use, exposure to heat, or accidental impacts. Causes of a bad knob include cracking, stripping of the internal connection, or the knob becoming loose and difficult to turn.

Symptoms of a bad knob include:

• Difficulty in turning the knob
• Inconsistent or unresponsive heat adjustments
• The knob becoming loose or falling off
• Visible cracks or damage to the knob

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This control knob attaches to the appliance's control shaft so you can turn settings on and adjust levels. Replacing a cracked or missing knob restores smooth, positive control of your range or cooktop.

• Attaches to the control switch shaft to select Off/On and heat or function levels
• Restores proper feel when the original knob is cracked, stripped, loose, or missing
• Typical symptoms include: knob spins freely, wobbles, is hard to turn, or won't stay aligned
• Durable replacement to maintain accurate, repeatable adjustments

• Disconnect power and/or gas supply and allow all surfaces to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying against the panel
• Align the new knob with the shaft and press straight on until fully seated
• After installation, verify the control turns smoothly and points to the correct settings

This is a replacement control knob for range models. It lets you turn the valve or switch to adjust burner or oven settings, restoring a secure grip and clear control when the original knob is worn, broken, or missing.

• Rotates the control shaft to set heat levels or functions
• Helps when the knob is cracked, stripped, loose, or missing
• Restores accurate, easy adjustment of the control
• Direct-fit design for the specified control shaft style

• Disconnect power and allow the appliance to cool before service
• Pull the old knob straight off the control shaft
• Align the new knob with the flat/D-shaft and press firmly into place
• Test for smooth rotation and proper engagement of the control

This replacement thermostat knob mounts on the oven control shaft so you can select baking and broiling temperatures. Swap a broken or stripped knob to restore smooth, reliable temperature selection and a clean, finished control panel. What it does:

• Attaches to the oven thermostat shaft to turn the control and choose a temperature
• Provides the hand grip/interface for turning the oven on/off and setting temperature
• Helps ensure positive engagement with the control; a worn knob may slip or spin freely
• Common symptoms: knob cracked, missing, loose, or won't turn the thermostat reliably

• One oven thermostat control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the thermostat shaft; do not pry sideways
• Align the new knob's flat/D-shaped recess with the shaft and press straight on until fully seated
• Verify orientation (OFF/indicator alignment) and confirm the knob turns the control without slipping

• Designed for the oven thermostat control (separate from surface burner knobs on many models)

This surface burner valve knob assembly restores smooth, accurate control of your cooktop burner. Replace a cracked or slipping knob so you can turn the valve on/off and adjust heat with confidence.

• Attaches to the burner valve stem to control flow and heat level
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob wobbles, spins on the shaft, or won't stay on
• Aligns with panel markings for clear setting selection

• Allow the appliance to cool; disconnect power and, if applicable, shut off gas
• Pull the old knob straight off the valve stem—do not twist the stem itself
• Align the new knob with the flat/splined shaft and press on firmly
• Turn through the full range to confirm smooth operation and full shutoff

This control knob assembly restores smooth, reliable burner control on your range or cooktop. Replace a cracked, stripped, or missing knob to adjust heat accurately and keep the control panel looking clean and consistent. What it does:

• Couples to the control valve or switch shaft so you can turn the burner on/off and set the heat level
• Replaces knobs that are cracked, stripped, loose, wobbly, or missing
• Helps ensure precise, repeatable adjustments during cooking
• Restores the original look and feel of the control panel

• Disconnect power; for gas appliances, also shut off the gas supply before servicing
• Pull the old knob straight off the control stem—do not force past the stop
• Align the new knob with the stem orientation and press firmly until fully seated
• Test for smooth operation before returning the appliance to service

This gas valve knob restores smooth burner control on your range or cooktop. Replace a cracked, stripped, or missing knob to reliably turn the valve from Off to Hi/Lo and fine-tune the flame.

• Mounts on the burner valve stem to select Off, Low, and High settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob won't turn the valve or align with settings
• Restores consistent feel and control during flame adjustment

• Ensure all burners are Off and the appliance is cool before servicing.
• Pull the old knob straight off the valve stem; do not force or twist the stem.
• Align the new knob with the flat/D of the stem and press firmly until fully seated.
• Disconnect power and shut off gas first if accessing internal parts is required.

Color: Black. Other colors: For almond knob use WP8053597, for white knob use WP8053596.

This burner control knob replaces a worn or broken knob on your range or cooktop. Made for the standard burner position, it restores smooth on/off and heat-level adjustment while keeping the control panel looking clean and complete.

• Attaches to the burner/element control shaft to turn the burner on/off and adjust heat
• For the standard burner position; other burner types may use different knobs
• Common fix for knobs that are cracked, stripped, loose, or missing
• Restores a positive feel and clear setting selection

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control shaft; do not bend or twist the shaft
• Align the new knob with the shaft flat and press straight on until fully seated
• Verify smooth operation through all settings before use

Color: White. Measures about 2 inches in diameter.

RF Black

This is a control knob for a range/cooktop. It lets you turn the burner valve shaft to adjust flame or heat settings. A worn or cracked knob can slip, sit crooked, or fail to turn the control smoothly.

• Replaces a damaged or stripped knob so settings engage properly
• Common symptoms: knob cracks, loosens, wobbles, or won't turn the valve shaft
• Restores clear pointer alignment and tactile click/feel during adjustment

• Disconnect power and allow all surfaces to cool before servicing
• Pull the old knob straight off the valve shaft; align the new knob's D-shape/flat with the shaft and press firmly
• Do not force—verify the knob matches the shaft style and location
• Test each control for smooth movement and correct alignment after installation

The Push Button is an OEM component specifically designed for select Bosch dishwasher control panels. It activates cleaning cycles through tactile engagement. 

Reinforced polymer caps endure user-generated pressures without cracking or splitting. Protected circuit pathways respond dependably to indexed presses starting sequences.

Symptoms signaling the need for a new button involve:  

• Failure to register selections hindering engaged cycles
• Loosened fasteners enabling unintended button displacement
• Deformed housings with compromised switches no longer functioning 

Causes requiring replacement usually involve years of wear degrading protective seals. Direct impacts may unsettle attachment boards necessitating full assembly swapping to restore integrity.

This OEM Bosch replacement push button is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher control modules relying on electronically controlled starts. Proper fastening re-enables intended initiation capabilities.