Waste Line Mover Regular Starter Pulley Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10547292
The Idler Pulley Wheel & Arm Assembly is an OEM replacement part for Whirlpool washing machines. It plays an important support role by providing additional tension on the drive belt during spin cycles to ensure balanced operation. Proper belt tension is necessary for the smooth rotation of the wash basket.
Symptoms of a faulty assembly include:
- Vibration or shaking during high-speed spins
- Loud clunking or grinding noises from unbalanced loads
- Premature belt wear due to insufficient tension
- Error codes related to spin function issues
Causes can be wear over time, belt slippage damaging the idler wheel, or stiffness impairing proper tensioning.
This OEM Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer was making a loud thumping sound. Ralph O. • Rio Rancho , NM • December 14, 2021
I tried to hire someone through Home Advisor and was given an initial estimate of 436.00!?! However, no one ever contacted me about repairing the dryer. The washer and dryer are about 12 or 13 years old, so me and the wife discussed going to look at the alternative.... Buying a new washer and dryer set. We had planned on going on Dec 10th. I then decided to do some research on YouTube on Dec 8th for dryer repair and came across a video that was made by AppliancePartsPros.com. The video covered...
Read more
More
$28.95
- Compare At:
-
$34.16
- You Save:
-
$5.21
Genuine Ge part
By: Ge
Part Number: WD01X35298
Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.
What it does
- Supports and guides the lower rack along the tracks
- Replaces broken, missing, or flat-spotted wheels and cracked carriers
- Helps prevent the rack from popping off the rails during loading
- Reduces drag that leads to stiff, uneven rack travel
What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.
Install notes
- Disconnect power before servicing the rack area.
- Pull the lower rack out; swap one assembly at a time to match left/right orientation.
- Fully seat tabs/locks on each carrier; verify wheels roll freely.
- Best practice: replace all four together for even tracking, then run a quick test cycle.
Do-It-Yourself Stories from Customers like You
A wheel housing attached to the bottom of the dishwasher dish rack had come off and melted in a wash cycle Jessica B. • Dayton , NV • November 03, 2024
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix!
Read more
More
$27.58
- Compare At:
-
$30.64
- You Save:
-
$3.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001042
The Drum Support Roller is an OEM part for Whirlpool dryers. It plays a critical role in supporting and stabilizing the dryer drum as it rotates, allowing clothes to tumble evenly and dry efficiently. This support roller ensures smooth, quiet operation and helps prevent unnecessary strain on the motor and other components.
Causes of a bad Drum Support Roller can include continuous wear from regular use, overloading the dryer, which puts extra strain on the rollers, and lack of maintenance, such as not cleaning the lint and debris that can accumulate on the rollers.
Symptoms of a bad Drum Support Roller include:
- A thumping or rumbling noise during operation
- The dryer drum not turning smoothly or at all
- Excessive vibration of the dryer unit
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Beating and bumping like a pair of tennis shoes were inside William R. • Simpsonville , SC • March 28, 2017
I pulled the dryer away from the wall and unplugged it. Then I used a 5/16 nut driver and removed the 2 screws in the bottom front panel and pulled it off. Next I removed the 2 5/16 screws holding the front door panel and pulled it down far enough to disconnect the wires for the light and the wires on the door switch. Then , using a putty knife I popped the springs holding the top and control panel then pulling the top up and resting it against the wall. Now I started my repair by laying on...
Read more
More
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 3949247V
The Washer Lid Switch is an OEM replacement part for Whirlpool washers. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle.
Symptoms of a bad Washer Lid Switch include:
- The wash cycle will not start even when the lid is closed
- Error codes displayed related to the lid being open
- Inability to advance through cycle selections
- Flashes or other improper lid switch behavior
Causes of a bad lid switch can be normal wear and tear over time. Moisture exposure may also contribute to internal component failure.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not drain
-
Won't start
-
Will not fill with water
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Our washer wouldn't rinse spin or drain Jan C. • Somerville , MA • April 23, 2015
My son was doing his laundry, only to announce that the washer wouldn't rinse, spin or drain. I looked on line at new washers and was staggered to see how much they cost, our Whirlpool is 20 years old! Then I looked on Craig's list to see about getting a used washer, but when I found something that looked good, and looked up how it performed, most of them had terrible reviews. So, I looked at a video that told about the 5 most common things to go wrong and figured out it was a broken lid...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Ge part
By: Ge
Part Number: WD35X21038
The Lower Dishrack Roller Kit is an OEM part for GE dishwashers. This kit includes 8 wheels and 8 axles. It allows it to glide smoothly in and out of the dishwasher. Proper functioning of these rollers is crucial for the easy loading and unloading of dishes, ensuring that the dishrack moves efficiently along its tracks.
You should replace the lower dishrack roller kit if the rollers become worn out or damaged. Common causes of roller issues include wear and tear from frequent use, accumulation of debris, or breakage due to heavy loads or accidental impact.
Symptoms of a bad lower dishrack roller kit include:
- Difficulty sliding the lower dishrack in and out
- The dishrack derailing or not staying on its tracks
- Unusual noises when moving the dishrack
- Visible damage or wear to the rollers
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher lower rack wheels were melted/broken and the rack wouldn't roll the washer would make a loud clunking noise while aggitating one of the rubber top tub restraints were broken Joseph Z. • Louisville , KY • September 23, 2016
I never respond to these kinds of requests but I must respond to this one because of your superior service!
The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too.
The dishwasher wheels replacement didn't require tools & took less than 15 minutes.
The original design/materials are not very...
Read more
More
$30.71
- Compare At:
-
$36.54
- You Save:
-
$5.83
Genuine Ge part
By: Ge
Part Number: WE12X83
The Idler Pulley is an OEM part for GE dryers. This critical component helps to maintain the correct tension on the dryer's drive belt, ensuring smooth operation and preventing it from slipping.
Symptoms of a bad Idler Pulley include:
- Squeaking or screeching noises during dryer operation, often a sign of bearing wear or failure.
- The dryer drum not turning smoothly, or at all, indicating that the belt may be slipping or has come off entirely due to a failed pulley.
- Excessive heat or a burning smell, which can occur if the pulley is seizing up and causing friction.
- Visible wear or damage to the pulley itself.
Causes of a bad idler pulley can include worn bearings, accumulation of lint and debris that impedes rotation, or material fatigue after prolonged use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018
Repair went well, replaced the pulley wheel, belt, rear drum bearing. Had an issue after replacement with the dryer stopping after ~5mins or so when running with heat. Fluff cycle would run fine.
Details:
The lock nut on the pulley wheel didn't feel tight enough so i tried to crimp it back on the pulley arm. It then became way too lose. I had to replace it with a plastic washer I had in my toolkit. That fit snug and seems to work fine. I also added some grease to the pulley shaft under...
Read more
More
$16.68
- Compare At:
-
$30.92
- You Save:
-
$14.24
Genuine Lg part
By: Lg
Part Number: 4561EL3002A
The Idler Pulley Assembly is an OEM part for LG dryers. It plays a critical role in the dryer's drum belt tension system, helping to maintain proper tension on the belt so the drum can rotate smoothly during the drying cycle.
Causes of a bad idler pulley assembly can include wear and tear over time, buildup of lint or debris, or damage from an overloaded dryer. A malfunctioning idler pulley can lead to inefficient drying and potential damage to other dryer components.
Symptoms of a bad idler pulley assembly include:
- Squeaking or squealing noises during operation
- The drum not rotating properly or at all
- The dryer stopping mid-cycle
- The belt slipping or breaking
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Noisy spin Troy E. • Salem , NH • April 16, 2018
Was going to order 4 new wheel & spindle sets, then saw you could get just the wheel for 1/3 the cost, so I ordered those. Then in the frequently ordered other items I saw the idler wheel assy. So I ordered one of those also. Glad I did, it was in worse shape than any of the wheels which still seemed to spin freely after I got all the hairs and crap off them. Anyways, went by the video step by step. Pretty straightforward. Have a good vacuum handy, I’m surprised that it used to dry at all...
Read more
More
$62.95
- Compare At:
-
$74.91
- You Save:
-
$11.96
Genuine Whirlpool part
By: Whirlpool
Part Number: W10613606
The Compressor Start Relay is an OEM part for Whirlpool refrigerators. This component helps to kickstart the compressor, facilitating the refrigeration cycle that cools the interior of the fridge.
Such issues can stem from electrical failures within the relay, physical damage, or wear and tear from regular use. When the relay does not function correctly, it can lead to inconsistent cooling and, in severe cases, cause the compressor to overheat and fail prematurely.
Symptoms of a failing Compressor Start Relay include:
- The refrigerator not cooling properly or not cooling at all
- A noticeable clicking sound emanating from the back of the refrigerator, indicating the relay is trying to start the compressor but failing
- The refrigerator starts and stops frequently, unable to maintain a constant temperature
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Clicking sound
-
Won't start
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fan would run but compressor would not start-resulting in no cooling. Thomas F. • De Soto , WI • March 14, 2014
Removed back cover and installed new start device. Plugged in refridgerator and it runs like new.
Read more
More
$53.27
- Compare At:
-
$74.44
- You Save:
-
$21.17
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304464438
The Compressor Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component is essential for providing the necessary torque to start and maintain the operation of the compressor motor, which is responsible for cooling the refrigerator.
Symptoms of a failing compressor run capacitor include:
- The refrigerator not running or cooling properly
- The compressor failing to start or running intermittently
- Humming or buzzing noises coming from the compressor area
Causes of needing to replace the compressor run capacitor can include normal wear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
This part fixes the following symptoms
-
Won't start
-
Too warm
-
Fridge too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
My Frigidaire frost free commercial freezer was screeching louder than the wheels on my radio flyer red wagon when it was overloaded with 5 cent return for deposit coca cola bottles back in the 1960's Daniel G. • El Paso , TX • January 24, 2021
In short - I replaced the evaporator fan motor and the evaporator fan blade.
The Appliance Parts Pros website was extremely helpful to me. Here's how.
1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux.
2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help.
3. The site provided guidance videos (not...
Read more
More
$36.95
- Compare At:
-
$44.34
- You Save:
-
$7.39
Genuine Bosch part
By: Bosch
Part Number: 00611475
The Lower Dishrack Wheel is an OEM replacement part for Bosch dishwashers. These wheels are essential components that allow for smooth and effortless movement of the lower dishrack or basket in and out of the dishwasher tub.
Symptoms of needing to replace the lower dishrack wheels include:
- Difficulty in sliding the dishrack in or out
- Excessive noise or grinding sounds when moving the rack
- Visible damage, cracks, or worn-out wheels
Causes of faulty lower dishrack wheels can include normal wear and tear over time, exposure to debris or foreign objects that can cause damage, or issues with the track or rail system on which the wheels operate.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
Wheel on bottom rack was missing Steve H. • Ogden , UT • July 02, 2018
Popped on the new one, very easy
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213
The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently.
Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.
Symptoms of a bad Thrust Bearing Kit include:
- The washing machine is noisy during operation
- The washer struggles to agitate or spin
- The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
- Excessive vibration during use
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Spins slowly
-
Pumps but will not spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Washer squeaked when tub is stopped during spin cycle Daniel K. • Grafton , WI • July 22, 2018
My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the...
Read more
More
$43.95
- Compare At:
-
$59.58
- You Save:
-
$15.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10571738
The Dishrack Adjuster and Wheel is an OEM part for Whirlpool dishwashers. This part ensures the dishwasher rack can be easily adjusted and smoothly rolled in and out of the dishwasher. The adjuster mechanism allows for the height of the upper rack to be modified to accommodate dishes of various sizes, while the wheel facilitates effortless movement.
Over time, the dishrack adjuster and wheels may become damaged from wear and tear, leading to difficulty in adjusting the rack height or issues with the rack's movement.
Symptoms of a bad Dishrack Adjuster and Wheel include:
- Difficulty in adjusting the height of the dishwasher rack.
- The dishwasher rack fails to stay in place at the desired height.
- The rack becomes challenging to slide in or out of the dishwasher.
- Noticeable wear, cracks, or breakage on the wheels or adjuster.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dishwasher upper rack wheel assembly broke Jim J. • Foley , AL • June 18, 2021
It went perfect, the part fit just like the original. Took about five minutes to install the new dishwasher upper rack wheel assembly.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066184
The Motor Pulley is an OEM part for Whirlpool dryers, connects the dryer motor to the drum belt, enabling the drum to turn and efficiently dry your clothes. This pulley is crucial for the smooth operation of the dryer, ensuring that the belt is tensioned correctly and runs smoothly without slipping or causing wear.
Causes of a bad Motor Pulley include wear and tear from regular use, a buildup of lint and debris that can interfere with its operation, or a malfunctioning dryer motor that puts undue stress on the pulley.
Symptoms of a bad Motor Pulley include:
- Unusual noises coming from the dryer, such as squeaking or grinding
- The dryer drum failing to turn even though the motor is running
- The dryer taking longer than normal to dry clothes, which can occur if the pulley is not providing proper tension to the belt
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken motor pulley Michele D. • Jefferson , MA • December 11, 2015
Replaced pulley and belt.
Read more
More
$38.95
- Compare At:
-
$45.96
- You Save:
-
$7.01
Genuine Ge part
By: Ge
Part Number: WD35X21041
The Lower Dishrack Roller and Axle Kit is an OEM part for GE dishwashers. This kit includes rollers and axles that attach to the lower dishrack, allowing it to slide smoothly in and out of the dishwasher for easy loading and unloading of dishes.
Causes of a bad roller and axle kit can include regular wear and tear from frequent use, damage from overloading the dishrack, or exposure to harsh cleaning chemicals. These factors can lead to the rollers or axles becoming worn, cracked, or broken, making it difficult to move the dishrack.
Symptoms of a bad lower dishrack roller and axle kit include:
- Difficulty sliding the lower dishrack in and out
- The dishrack derailing or coming off track
- Visible cracks or wear on the rollers or axles
- Uneven or wobbly movement of the dishrack
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Rollers on lower dishwasher rack kept falling off! Angie S. • Sugar Land , TX • November 03, 2014
I ordered replacement rollers and studs for my Ge Profile Dishwasher yesterday at 7:57am. I received the same today around 6pm! Snapped them into place in 5 minutes….They fit beautifully!
I am truly amazed at not only how easy and thorough your website is but how lightening fast delivery is! I do a lot of on-line ordering and you all are the first to be so efficient and fast. My only question is …."How do you do it?!"
Thank you for having excellence in what you do!
Read more
More
$30.71
- Compare At:
-
$36.85
- You Save:
-
$6.14
Genuine Ge part
By: Ge
Part Number: WD12X26146
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
- Difficulty in sliding the lower rack in or out
- Excessive noise or grinding during rack movement
- The rack becoming stuck or not rolling smoothly
- Visible wear, cracks, or damage to the roller itself
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
A wheel housing attached to the bottom of the dishwasher dish rack had come off and melted in a wash cycle Jessica B. • Dayton , NV • November 03, 2024
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix!
Read more
More
$6.53
- Compare At:
-
$8.36
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-3037050
The Idler Pulley Wheel is an OEM part for Whirlpool dryers. It helps maintain the correct tension on the dryer drum belt, ensuring the drum rotates smoothly during the drying cycle.
Over time, the idler pulley wheel can wear out due to regular use, friction, or lack of lubrication. It may also become damaged from excessive lint buildup or foreign objects obstructing its movement.
Symptoms of a bad idler pulley wheel include:
- Squeaking or squealing noises during the drying cycle
- The dryer drum not turning or turning irregularly
- The dryer not starting
- The belt slipping off the pulley
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Very concerning loud thumping noise while running our dryer. William M. • Sudbury , MA • July 20, 2019
In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future.
I was wrong.
I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity.
I found out...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03