Module Dispenser Parts

This is the lid assembly for the dispenser. It covers and protects the dispenser compartment, helping keep debris out and ensuring the dispenser opens and closes properly.

• Covers the dispenser compartment to prevent spills and contamination
• Helps ensure proper dispenser operation
• Common fix when the dispenser lid is cracked, broken, loose, or won't stay closed

• Disconnect power and shut off water before servicing
• Open the dispenser area and remove any retaining screws or tabs
• Transfer any reusable hardware from the old lid to the new assembly
• Test operation before returning the appliance to service

The Cooktop Bracket Kit is an OEM part for Bosch cooktops. This bracket and hardware kit serves to securely fasten the cooktop surface to the underlying countertop.

Causes of a bad bracket can include wear and deformation from heavy cooktop use over time, or damage to fastening screws from accidental impacts.

Symptoms of a bad bracket and fastening kit include:

• The cooktop surface becoming loose, wobbly, or unstable during use
• Gaps appearing between the cooktop and countertop edges
• Reduced heat containment and risk of burns from loose surfaces

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement control unit that manages the appliance's electronic functions, handling cycle timing, user inputs, and control signals to restore normal operation. Fits where the original electronic control board controls cycles and the user interface. What it does:

• Serves as the appliance's primary electronic control board, processing button/keypad commands and sequencing cycles.
• Controls cycle timing, relays, and signals to motors, valves, and heaters.
• Common symptoms of a failing unit: unresponsive controls, cycles won't start or advance, or intermittent operation.
• Does not include peripheral components such as face panels, knobs, or separate display overlays.

• Always disconnect power to the appliance before starting work to avoid shock or damage.
• Handle the board by its edges and avoid touching circuits; wear an anti-static wrist strap if available.
• Verify connector orientation and seat all wiring harnesses firmly; check harness routing before reassembly.

This electronic control board replaces the appliance's console control module to restore normal user interface and electronic function. It manages timed cycles, user inputs and sends signals to the main components for correct operation. What it does:

• Interprets button/knob inputs and runs selected cycles or modes
• Sends control signals to heating, motor, valve or compressor circuits as required
• Helps correct symptoms like unresponsive controls, failure to start, or erratic cycle behavior
• Replaces a failed or damaged console control to restore reliable electronic control

• One electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by its edges and avoid touching components or connectors
• Verify connector locations and wire routing matches the original during reassembly

The Divider is an OEM part for Whirlpool washers. It fits within the dispenser drawer, creating separate compartments for different laundry products such as detergent, fabric softener, and bleach. It prevents mixing and allows for convenient dispensing during each wash cycle.

A bad dispenser drawer divider can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or broken divider, difficulty in separating the compartments, or improper dispensing of laundry products, it may be time to replace this part.

Symptoms of a bad dispenser drawer divider include:

• Loose or broken divider
• Difficulty in separating the compartments
• Improper dispensing of laundry products

Restore your Whirlpool washer's dispenser drawer by replacing the faulty or damaged divider with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Dispenser Drawer Handle is an OEM part compatible with Whirlpool washers. It provides a convenient grip for opening and closing the dispenser drawer. It allows you to access the detergent, fabric softener, and bleach compartments within the dispenser drawer.

A bad dispenser drawer handle can occur due to wear and tear, accidental damage, or excessive force when operating the handle. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the dispenser drawer, or the handle not staying securely in place, it may be time to replace this part.

Symptoms of a bad dispenser drawer handle include:

• Loose or broken handle
• Difficulty in opening or closing the dispenser drawer
• Handle not staying securely in place

Restore your Whirlpool washer's dispenser drawer by replacing the faulty or damaged handle with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This handle assembly replaces a damaged or worn refrigerator door handle, restoring a secure grip and normal door operation. It provides an OEM-fit replacement that mounts in the factory handle location for a neat, finished look. What it does:

• Replaces a broken, cracked, or loose refrigerator door handle
• Restores a solid grip for opening and closing the door
• Helps prevent further damage to the door trim or handle mounting area
• Keeps the cabinet appearance consistent with the original finish

• Disconnect power and remove food from the door area before starting work
• Use appropriate hand tools to remove mounting screws or caps; retain fasteners for reassembly
• Align assembly with mounting posts and secure without over-tightening to avoid cracking
• If door trim or mounting hardware is damaged, inspect and replace as needed for a secure fit

The Icemaker is an OEM component specifically designed for Whirlpool refrigerators. As the name implies, it is responsible for automatically producing ice through the process of harvesting and manufacturing. The icemaker freezes water into individual ice cubes and deposits them into the ice bin.

Causes of a bad icemaker can include clogged or frozen water lines preventing proper water flow, malfunctioning electronic controls that fail to trigger harvesting and freezing cycles, or damage and wear to mechanical components like gears or augers.  

Symptoms of a bad icemaker include:

• No ice production over multiple cycles  
• Inconsistently sized or misshapen cubes
• Cubes that fuse together or fail to eject properly
• Leaks or drips from the icemaker area
• Loud knocking or grinding noises during the operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Electromechanical timer that controls a dryer's cycle selection and timing, restoring correct cycle progression and automatic shutoff. Ideal when cycles won't advance or the dryer runs irregularly. What it does:

• Advances the dryer through selected cycles and signals timed shutoff.
• Replaces a faulty timer that prevents cycle selection or stops cycles from advancing.
• Can resolve symptoms like dryer not advancing through cycles, running continuously, or failing to start selected cycles.
• Works with the dryer's control circuitry to coordinate timed and automatic functions.

• Disconnect power at the breaker or unplug the appliance before starting any repair.
• Remove the control panel to access the timer; keep track of mounting screws and wire locations.
• Transfer wires exactly as removed; take a photo before disconnection to aid reassembly.

The Timer regulates the sequence and duration of dishwasher cycles. It advances power to each component in order so the machine washes, drains, and dries at the correct times for dependable operation.

• Controls and advances the dishwasher through each programmed step
• Routes power to the fill valve, wash motor, drain pump, and heater in sequence
• Failure can cause the cycle not to start or advance, to stop mid-cycle, or to run too long
• Intermittent contacts may lead to skipped steps or inconsistent drying/heating

• Disconnect power at the breaker before servicing
• Access the control/console area; remove the knob and mounting hardware as needed
• Label or photograph wire positions; transfer wires to the new timer one at a time
• Mount securely, reassemble panels, restore power, and run a test cycle

This ice maker assembly replaces the complete cube-making unit in your refrigerator. It restores automatic freezing, harvesting, and bin-level shutoff so your appliance can reliably produce a steady supply of ice again.

• Freezes water in the mold and ejects cubes into the ice bin during each harvest cycle
• Pauses production when the bin is full via the built-in shutoff mechanism
• Typical failure symptoms: no ice production, cubes not ejecting or stuck mid-cycle, intermittent clicking/grinding from the module
• Can replace a cracked or seized ice mold assembly that jams or leaks at the icemaker

• Disconnect power and shut off the refrigerator's water supply before servicing
• Remove the ice bin; loosen mounting screws and unplug the wire harness to release the old unit
• Transfer any mounting brackets or covers from the original unit if needed; reuse existing hardware
• Restore power and water; ensure the fill tube is clear and allow the icemaker to begin cycling

This dispenser assembly replaces a worn or damaged refrigerator dispenser to restore reliable dispensing of water and ice. It provides the dispenser housing and interface needed for proper user operation and sealing at the door. What it does:

• Houses the dispenser components and provides the push-lever/door opening for water and ice delivery
• Restores a broken, cracked or loose dispenser opening that causes poor engagement or cosmetic damage
• Helps stop minor leaks or drips at the dispenser area when seals and gaskets are intact
• Eliminates sticking or misaligned dispenser operation that prevents normal dispensing

• Disconnect power and shut off the water supply before beginning any work.
• Installation typically requires removing the refrigerator door panel(s) and detaching the old dispenser from the inner door; keep fasteners for reuse unless replacements are provided.
• Handle plastic parts gently to avoid cracking; inspect door seals and gaskets and replace if worn.
• After installation, restore power and water, then test dispenser operation and check for leaks.

This fabric softener dispenser assembly holds liquid softener and releases it during the rinse cycle. Replacing a cracked, missing, or clogged dispenser restores reliable dispensing, reduces messes, and helps keep the washer tub and laundry free of residue. What it does:

• Holds fabric softener and meters its release during the rinse phase
• Uses a simple siphon action to deliver softener evenly into the tub
• Helps prevent spills, streaks, and build-up from manual pouring
• Common symptoms: softener left in cup after cycle, leaks or drips, cracked/loose cup or cap, residue/odor in dispenser area

• 1 fabric softener dispenser assembly

• Disconnect power to the washer before servicing
• Remove the old dispenser from its mounting point; some models require a twist or releasing locking tabs
• Clean any residue from the mounting area to ensure proper flow
• Align and press the new dispenser firmly until fully seated, then test with a small amount of water

This replacement ice container assembly stores and delivers ice from the freezer to the dispenser. Replacing a cracked or jammed bin restores smooth cubed/crushed dispensing and dependable ice flow.

• Holds harvested ice in the freezer and interfaces with the dispenser
• Feeds ice toward the chute when you press the dispenser lever
• Supports cubed or crushed selections (as designed for your model)
• Common symptoms: won't dispense, dispenses slowly, only cubes or only crushed, cracked/warped bucket, grinding or jamming noises

• Unplug the refrigerator and wear cut-resistant gloves
• Empty remaining ice, release and lift out the old bin, then slide the new assembly fully into place
• Restore power and test both cube and crush functions at the dispenser

The Refrigerator Ice Guide Assembly is essential for maintaining smooth ice dispensing in your Samsung refrigerator. This genuine OEM part ensures that ice cubes flow efficiently from the ice maker to your desired location, enhancing the overall functionality of your appliance. Designed specifically for Samsung refrigerators, the Refrigerator Ice Guide Assembly guarantees a secure fit and seamless integration with your existing system. Its durable construction prevents jams and minimizes ice dispensing issues, providing a reliable solution for your kitchen needs. Installing this genuine OEM part restores the optimal performance of your ice dispensing feature, ensuring you enjoy fresh ice whenever you need it. Whether your original ice guide is cracked, broken, or no longer functioning correctly, the Refrigerator Ice Guide Assembly offers a straightforward and effective replacement. Enhance your refrigeratorGÇÖs performance and enjoy the convenience of consistent ice flow with this high-quality, customer-focused replacement part.

Color: Black

The Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, it directs all functions of the dishwasher from start to finish.

The board regulates tasks like detergent dispensing, and activating the wash and rinse arms. It carries out programmed cycles chosen by the user seamlessly and cleans each load of dishes.

Causes of a bad control board can include defects resulting from continued exposure to high heat and moisture during cycles as well as accidental impact or power surges over time.

Symptoms of a bad control board include:

• Failure to initiate selected cycles or advance to different phases
• Lights not illuminating or buttons malfunctioning
• Abnormal noises coming from the interior
• Dishes not getting fully clean after a cycle

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.