Solenoid Parts

This mixing valve controls and directs hot and cold water into the washer to produce the desired fill temperature for each cycle. Replaces a worn or leaking inlet control to restore correct water selection and filling behavior. What it does:

• Directs hot and cold water to create the set wash or rinse temperature
• Opens and closes water flow during fill cycles so the tub fills to the correct level
• Commonly replaced for leaking, no-fill, or incorrect-temperature symptoms
• Works as the washer's water inlet/mixing control within the water valve assembly

• One mixing valve assembly (single unit as shown)

• Disconnect power and shut off both hot and cold water supplies before servicing
• Handle gently; avoid bending or stressing inlet ports and electrical connectors
• Verify hose and connector condition when reinstalling; tighten fittings to prevent leaks

The Inlet Valve is an OEM component specifically designed for GE washing machines. It controls water entry into the washer tub during designated points in wash cycles.

Symptoms of a bad inlet valve include: 

• Inability to fill with water or short fills during wash steps  
• Leaks or water constantly running from the inlet area of the washer
• Odd sounds, banging or skipping when the filling mechanism engages

Causes involve mineral buildup, corrosion, or stripped valve internals preventing proper closure after years of use. 

This GE OEM replacement inlet valve ensures precise water fill levels. Compatible with some Hotpoint, RCA, and Kenmore models as well, it maintains optimal cycle functioning. 

This secondary water valve assembly controls water flow to the appliance's secondary water circuit, restoring proper water delivery for dispensers or ice makers. Replacing a faulty valve helps stop leaks and restore reliable filling. What it does:

• Opens and closes the secondary water path to allow water to the dispenser or ice maker
• Stops water flow when the appliance signals shutoff, preventing overfilling
• Commonly used when no water reaches the dispenser or ice maker
• Can be replaced to resolve intermittent flow, continuous filling, or valve leaks

• Disconnect power and shut off the water supply before beginning work
• Turn off and relieve pressure in the water line, then disconnect supply and outlet fittings
• Inspect and replace any damaged inlet hoses or seals; tighten fittings to manufacturer torque specs
• After installation, restore water and power, check for leaks and verify proper operation

This dispenser valve assembly controls water flow to the fridge door dispenser for reliable dispensing and shutoff. It replaces a failed valve to restore proper water delivery and stop unwanted dripping or leaks. What it does

• Opens and closes the water passage when the dispenser actuator is pressed to deliver water to the glass.
• Seals the water line to prevent drips or continuous flow when the dispenser is idle.
• Helps stop intermittent dispensing or no-water issues caused by a faulty valve.
• Works with the door dispenser plumbing—electrical/connectors remain unchanged.

• Disconnect power and shut off the refrigerator water supply before starting.
• Remove the refrigerator door panel or access cover per your model's service instructions to reach the valve.
• Verify electrical connector seating and water line fittings are secure; replace any damaged tubing or seals.
• Test for leaks and proper dispensing after restoring power and water.

The Dishwasher Vane Check Drain is essential for maintaining optimal water flow in your Samsung dishwasher. This component ensures that wastewater is properly drained, preventing backups and improving the overall efficiency of your appliance. Crafted as a genuine OEM part, the Vane Check Drain guarantees a perfect fit and reliable performance, matching the high standards of your Samsung dishwasher. Installing this part is straightforward, allowing you to restore your dishwasher's functionality quickly and easily. The Dishwasher Vane Check Drain is designed to withstand the rigors of daily use, providing long-lasting durability and peace of mind. By replacing a worn or damaged drain with this genuine OEM part, you enhance the longevity of your appliance and maintain its cleaning performance. Compatible with a wide range of Samsung dishwasher models, this Vane Check Drain is the ideal solution for ensuring your dishwasher operates smoothly and efficiently.

The Water Valve is an OEM part for GE electric dryers. Located near the bottom of the machine, it controls water flow into the condenser system during moisture-sensing cycles.

The moisture sensing function uses this valve to introduce precise amounts of water vapor into the exhaust air stream periodically. This allows the condenser to capture moisture readings accurately and determine optimal cycle time based on humidity levels. 

Causes of failure include mineral buildup restricting flow, worn seals enabling leaks, or misaligned internal components hindering valve movement.

Symptoms of a faulty water valve are: 

• Loss of moisture sensing ability
• Incomplete or improper readings affecting cycle times  
• Water leaks from the valve area
• Failure to inject water vapor as needed

This part is also compatible with some Kenmore models using GE components.

This water inlet valve assembly controls water flow to the dispenser and ice maker, restoring proper fill and dispensing when the valve is the source of the problem. Replaces a failed or leaking inlet valve to resume normal water delivery. What it does

• Opens and closes to let water into the ice maker and dispenser when signaled
• Stops water flow when closed to prevent continuous filling or flooding
• Commonly linked to no water dispensing, slow/weak fill, or intermittent filling of ice maker
• Helps stop leaks or drips when the internal valve seat is failing

• One water inlet valve assembly

• Disconnect power and shut off water before replacing to avoid electrical shock and flooding
• Verify water supply line is depressurized and dry before disconnecting fittings
• Tighten plumbing connections to the manufacturer torque recommendations; check for leaks after installation

Color: White

This Pipe Assembly routes water into the appliance so the dispenser and ice maker can receive a steady supply. Replacing a damaged tube restores proper water flow and helps stop leaks or pooling inside or beneath the unit. What it does:

• Carries incoming water from the household supply to the appliance's internal water system
• Restores water delivery to the dispenser and ice maker when the original tube is cracked or blocked
• Prevents leaks and water damage caused by split, corroded, or pinched tubing
• Helps eliminate intermittent flow or weak dispenser output caused by a damaged water line

• One complete pipe assembly as shown

• Shut off the refrigerator's water supply and unplug the appliance before beginning
• Handle tubing fittings carefully; use proper tools to avoid damage or overtightening
• Inspect connection points and replace seals or clips if worn; test for leaks after reinstalling

This gas valve and pipe assembly controls and routes natural gas from the appliance inlet to the burner manifold, restoring proper fuel flow for ignition and stable burner operation. Designed as a direct-replacement service part. What it does

• Regulates and directs gas flow from the inlet to the oven/range burners.
• Enables proper ignition and stable flame for baking and broiling cycles.
• Works with the appliance's existing manifold and burner orifices to maintain correct gas delivery.

• Turn off gas supply and disconnect power before servicing; follow all safety procedures.
• After installation, check all fittings for leaks with an approved gas leak test (do not use an open flame).
• Replace only with the exact part specified for your appliance; inspect connections and gaskets and tighten to manufacturer torque specs.

This water inlet valve controls water flow to the dispenser and ice maker, restoring reliable water delivery and ice production. Designed as a direct replacement for the factory valve assembly to resolve water delivery issues. What it does:

• Opens and shuts to route water to the refrigerator dispenser and ice maker when energized
• Commonly replaces valves that fail to supply water or stop water flow completely
• Stops water flow when closed to help prevent continuous filling or overflow
• Addresses symptoms such as no water at the dispenser, weak water flow, or no ice production

• Disconnect power to the appliance and shut off the water supply before beginning work
• Turn off and drain any residual water in lines to reduce spills during replacement
• Ensure proper seating of inlet hoses and secure electrical connections to prevent leaks and electrical faults

This water inlet valve assembly controls water flow into the washer tub, restoring correct fill and water selection so cycles start and run properly. It replaces a failed or leaking inlet valve to help the machine fill and pause as designed. What it does

• Opens and closes to allow cold and/or hot water into the washer during fill cycles
• Stops water flow when the machine reaches the set fill level
• Commonly replaces valves that leak, fail to fill, or cause the washer to overfill
• Works with the washer's control signals to route water only when needed

• Disconnect power and shut off household water supply before replacing the valve
• Tighten fittings to correct torque to avoid leaks; use new seals if provided or recommended

This water valve assembly controls water flow into the appliance, providing reliable fill operation for the dispenser/ice system. It replaces a worn or failed valve to restore proper water delivery and help prevent unwanted leaks. What it does:

• Opens and closes water flow to the appliance when signaled by the control
• Stops water flow to prevent overfilling or flooding when functioning correctly
• Commonly used when the appliance won't fill, makes no water available, or continuously runs water
• Helps ensure proper water supply to ice makers and dispensers

• Disconnect power and shut off the water supply before starting work
• Allow access to the valve and relieve any line pressure before disconnecting fittings
• Inspect and replace any damaged hose or seal while installing the new valve
• Test for proper operation and leaks after installation