Evaporator Coil Frosted Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303931775
The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively.
Symptoms of a bad Dryer Gas Valve Coil Kit include:
- No heat or insufficient heat in the dryer.
- The dryer stops heating partway through the cycle.
- A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
- Gas smell from the dryer, indicating incomplete combustion.
Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$23.95
- Compare At:
-
$34.51
- You Save:
-
$10.56
Genuine Ge part
By: Ge
Part Number: WB44K5009
The Broil Element is an OEM part for GE ovens. This element is located at the top of the oven and is crucial for the broiling function, providing high heat for cooking dishes such as meats and vegetables directly under the heat source. The broil element glows red hot when in use, creating the necessary temperature to sear food and lock in flavors.
Symptoms of a failing Broil Element include:
- The element not heating up when the broil setting is activated
- Uneven cooking or lack of browning on food intended to be broiled
- Visible damage to the element, such as blistering, bubbling, or breaks in the element coil
- No visible glow from the element during operation
Causes of a bad broil element often involve burnout from regular use, electrical issues such as faulty wiring or a malfunctioning thermostat that doesn't cycle the heat correctly.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014
Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good!
Read more
More
$66.95
- Compare At:
-
$79.67
- You Save:
-
$12.72
Genuine Ge part
By: Ge
Part Number: WB44T10009
The Oven Broil Element is an OEM part for GE ovens. This element is located at the top of the oven cavity and is responsible for broiling, providing high heat for cooking tasks such as searing meats or browning the top of dishes.
Causes of a bad Oven Broil Element can include prolonged use, leading to eventual wear and tear, exposure to food spills and grease that can corrode or damage the element, and electrical issues that may cause it to fail prematurely.
Symptoms of a malfunctioning Oven Broil Element include:
- The element not glowing red when the broil function is activated
- Uneven cooking or browning of food
- The oven taking longer than usual to broil
- No heat production when the broil setting is selected
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Bake unit cracked and started glowing and sparking like the sun both elements replaced Steven S. • Somerset , KY • April 21, 2015
Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow.
CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15...
Read more
More
$54.36
- Compare At:
-
$86.47
- You Save:
-
$32.11
Genuine Ge part
By: Ge
Part Number: WB30T10074
The Large Surface Element is an OEM part for GE ranges and cooktops. This part provides the heat needed for cooking on the range's surface. This large element ensures even heat distribution and consistent cooking temperatures, making it ideal for boiling, frying, and other high-heat cooking methods.
Over time, surface elements can burn out or become less efficient, leading to uneven cooking or failure to heat up at all. This can be due to a variety of reasons, including prolonged use, overheating, or physical damage.
Symptoms of a bad Large Surface Element include:
- The element does not heat up
- It heats unevenly or only partially
- Visible damage to the element, such as blistering or cracks
- The element takes longer than usual to heat up
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Large heating element not working Shaun G. • Boulder , MT • September 04, 2015
I wasn't sure if it was the heating element surface, the receptacle or the switch. My wife does some canning so it had some good use. It turned out to be the receptacle. I purchased the element as well thinking it needed replaced anyway. All works now. All three items are/would be easy to change.
Read more
More
$58.95
- Compare At:
-
$69.56
- You Save:
-
$10.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000066
The Range Element Kit is an OEM part for Whirlpool ranges. This kit typically includes elements used for heating the oven or stovetop, ensuring efficient and even cooking or baking. The element measures 16" wide and 16" from the mounting plate to the other side. The terminal depth is 3", and the total element length is 19". It is rated at 2100 watts and 240 Volts.
Over time, heating elements can become worn out or damaged due to repeated use, exposure to high temperatures, or electrical issues. A malfunctioning element can lead to uneven cooking, longer cooking times, or the range not heating up at all.
Symptoms of a bad Range Element include:
- The element not heating up
- Uneven cooking or baking results
- Visible damage such as burns or breaks in the element
- Sparks or electrical issues when the element is turned on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Oven not heating evenly
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Oven heating element burned out. Andrew M. • Odessa , MO • February 06, 2021
The top part of our double wall oven quit working a couple years ago. We asked an appliance repair guy if he could find a replacement heating element and after a few days, he told us he couldn't. We switched to using the bottom and recently I started looking to purchase a new oven.
On a whim, I decided to check the Interwebs and found several sites claiming to have the part that the appliance repair guy said didn't exist. I ordered from Appliance Parts Pros and a few days later the...
Read more
More
$46.95
- Compare At:
-
$66.32
- You Save:
-
$19.37
Genuine Ge part
By: Ge
Part Number: WR51X10132
The Defrost Heater is an OEM part for GE refrigerators. It plays a crucial role in the defrost cycle, preventing the buildup of frost or ice on the refrigerator's evaporator coils.
Symptoms of a faulty Defrost Heater include:
- Excessive frost or ice buildup on the evaporator coils
- Inefficient cooling performance or temperature fluctuations
- Increased energy consumption due to the refrigerator working harder to cool
- Error codes or indicators related to the defrost system
Causes of a defrost heater failure can include electrical malfunctions, physical damage, or simply wear and tear over time.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Coil freezing up. Bottom deli drawer everything frozen ! Ann Marie E. • Gulfport , MS • May 29, 2023
Ordered a new evaporator fan, heater coil and fresh food fan. Troubleshooting on youtube, ordered the parts watched the video on how to remove old parts and then how to replace them. Called 3 different repair companies, seems no one will work on this GE French door fridge. I am sure someone with experience could change everything quicker! However, my daughter and I got the job done and the fridge is working great again! The videos on the parts ordering were the biggest help, straightforward and...
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Ge part
By: Ge
Part Number: WB30M1
The 6-Inch Small Surface Element is an OEM part for GE cooktops and ranges. It is designed to provide consistent and reliable heat for cooking on the stovetop. This heating element fits into the designated slot on the cooktop and is used for preparing smaller dishes or for simmering.
You should replace the surface element if it becomes faulty. Causes of a bad surface element can include wear and tear from regular use, electrical issues, or damage from overheating. A malfunctioning surface element can lead to uneven cooking, insufficient heat, or the element not heating up at all.
Symptoms of a bad 6-inch small surface element include:
- The element not heating up or only heating intermittently
- Visible damage such as burn marks or deformation
- Uneven heating or hotspots on cookware
- The element not fitting securely into its slot
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Matching 8-inch surface element - WB30M2; terminal block - WB17X5113
Do-It-Yourself Stories from Customers like You
Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015
Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale.
Read more
More
$39.63
- Compare At:
-
$61.80
- You Save:
-
$22.17
Genuine Frigidaire part
By: Frigidaire
Part Number: 316555800
The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts
Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.
Symptoms of a bad dual element include:
- Burner not heating up
- Inconsistent or uneven heating
- Element not switching between high and low heat
- Visible damage to the element
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The outer ring of the front left element would heat but the inner would not Larry G. • Flintstone , GA • December 17, 2019
Replacement of the element was relatively straightforward, but there are a couple of things to be aware of before you begin. First, turn off power to the stove at the breaker box. Allow the cooktop to raise by removing the two screws that secures it on the underside of the front edge. Open the oven door to do this. Removal of the old element is simple, just remove the two screws that secure the wide mounting bracket that holds the two front elements. Carefully turn the assembly over. To...
Read more
More
$130.95
- Compare At:
-
$154.52
- You Save:
-
$23.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 316225001
The Oven Baking Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking and roasting by converting electrical energy into heat within the oven cavity. The baking element measures approximately 19.4 x 18.5 inches.
You should replace this baking element if it stops functioning properly, which can occur due to wear and tear over time, electrical malfunctions, or physical damage to the element.
Symptoms of a bad oven baking element include:
- The oven not heating up properly or at all
- Uneven baking or roasting results
- Visible damage such as breaks or burn marks on the element
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Broken element Ted C. • Gloucester , MA • May 09, 2014
Replaced with new
Read more
More
$120.95
- Compare At:
-
$143.93
- You Save:
-
$22.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660532
The 6 Inch Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This component is essential for providing consistent, controlled heat to cookware on the stovetop.
Symptoms of a bad 6 Inch Small Surface Element include:
- Lack of heat production, with the element failing to warm up at all.
- Inconsistent heating, where the element may fluctuate in temperature or only partially heat.
- Visible damage such as blistering, bubbling, or cracks on the element's surface.
- A tripped circuit breaker when the element is turned on, indicating a short.
Causes of a bad surface element can include prolonged use leading to element burnout, electrical faults such as faulty wiring or internal failures, and physical damage from impact or heavy cookware being dropped on the element.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
8-inch element is part number WP660533.
Do-It-Yourself Stories from Customers like You
Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014
Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday.
This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire...
Read more
More
$28.25
- Compare At:
-
$44.73
- You Save:
-
$16.48
Genuine Ge part
By: Ge
Part Number: WR51X10101
The Defrost Heater Kit is an OEM part for GE refrigerators. It is designed to prevent frost and ice buildup within the freezer compartment by heating up at regular intervals to melt away any accumulated frost. For 12-inch glass tube heater use WR51X10055.
Symptoms of a bad Defrost Heater Kit include:
- Buildup of frost or ice on the freezer walls or around the evaporator coils.
- The refrigerator or freezer section becoming too warm due to blocked air vents by ice.
- Frequent cycling or longer running times of the refrigerator compressor.
Causes of a bad defrost heater can include failure of the heating element due to wear or a burnt-out component, malfunctioning sensors that regulate the defrost cycle, or electrical issues preventing the heater from activating.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer too cold
-
Fridge too cold
-
Too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer and refrigerator not cold enough Jennifer M. • Ny , NY • July 10, 2018
Yes, a 49-yr old woman fixed this fridge all by herself! AppliancePartsPros was very helpful in the diagnosis of the problem, which I determined to likely be the result of defrost failure. There was a large amount of ice and frost coating the back of the freezer despite the inside temp being 42 degrees. My husband thought I was crazy to think it was a problem with ice when the temperature was warm, but I told him to trust me and I would attempt the repair. He just wanted to throw the old one...
Read more
More
$55.44
- Compare At:
-
$65.97
- You Save:
-
$10.53
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304533520
The Dual Element is an OEM replacement part for Frigidaire electric ranges. This component is located on the cooktop surface and features two heating coils in one unit, one measuring 6 inches in diameter and the other 9 inches. It allows for precise control of cooking temperatures, accommodating various pot and pan sizes for more efficient cooking.
Causes of a bad dual element can include prolonged use that leads to wear and tear, electrical surges that can damage the heating element, or physical damage due to impact or mishandling. Over time, these issues can result in the element failing to heat properly or not working at all.
Symptoms of a bad dual element include:
- The element not heating up or only partially heating
- Inconsistent or fluctuating temperatures
- Visible damage, such as burns or breaks in the element
- The element not responding to temperature controls
- Sparking or unusual noises when the element is in use
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Left front burner center coil did not work Jack P. • Leesburg , FL • September 12, 2016
We are very inexperienced appliance repair people. Thus check it out first to see if we can fixit...successs. First checked to be sure it wasn't the actual switch. Did this by numbering the wires and then switching the two switches b/w the right and left front dual burners. Success, the switch was fine but kinda disappointed cause this part was less expensive. Proceeded to then order the left front dual burner. Arrived in a few days, packed well. We unplugged the appliance, as it been a...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 316203200
The Broil Element is an OEM replacement part for Frigidaire ovens. It is located at the top of the oven cavity and is responsible for providing the high heat required for broiling. This element heats up quickly and evenly to cook food from above, giving it a crisp and browned finish.
Over time, the broil element can degrade due to the high temperatures it operates under, as well as normal wear and tear from repeated use. Electrical surges or physical damage from cleaning or moving oven racks can also cause the element to fail. These factors can lead to the element no longer heating up properly or becoming completely non-functional.
Symptoms of a bad broil element include:
- The broiler not heating up or heating unevenly
- Visible signs of damage such as burns, blisters, or breaks in the element
- Sparking or unusual noises when attempting to use the broiler
- The oven taking longer to broil food or not achieving the desired browning effect
- The element not glowing red-hot during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven wouldn't heat up Danielle B. • Virginia Beach , VA • March 17, 2015
Removed the bake element and broil element. Tested them with a multi meter. They failed. Ordered new elements. Received them in 2 days. Installed new elements. Oven works great. Entire fix took 10 minutes to remove and test elements, 10 minutes to install the new elements. It was my first time working on an appliance, the instruction videos were great!
Read more
More
$117.95
- Compare At:
-
$140.36
- You Save:
-
$22.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372211
The Coil Burner Element is an OEM replacement part for Frigidaire cooktops and ranges. The 6-inch coil burner element typically consists of a spiral-shaped metal resistance wire or rod that glows red-hot when electricity passes through it. This heat is then transferred to the cooktop surface, allowing it to reach the desired temperature for various cooking tasks, such as boiling, simmering, or sautéing.
Symptoms of a bad coil burner element:
- Burner not heating up properly or failing to reach the desired temperature
- Uneven heating or hot spots on the cooktop surface
- Visible damage or breaks in the coil wire
- Unusual smells or burning odors emanating from the burner area
Causes of a bad coil burner element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore cooktops and ranges.
Do-It-Yourself Stories from Customers like You
Needed new burners and drip pans John V. • Houston , TX • February 22, 2016
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed.
Read more
More
$40.44
- Compare At:
-
$48.12
- You Save:
-
$7.68
Genuine Whirlpool part
By: Whirlpool
Part Number: W10856603
The Broil Element is an OEM part for Whirlpool ovens. It is located at the top of the oven interior and is responsible for providing intense, direct heat for broiling.
The broil element should be replaced if it becomes damaged or fails to heat properly. Causes of a bad broil element can include regular wear and tear, electrical malfunctions, or physical damage such as cracking or breaking.
Symptoms of a bad broil element include:
- The broil element not heating up
- Uneven cooking or browning when broiling
- Visible damage or blistering on the element
- Sparking or electrical shorts when the broiler is in use
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Broiler element burnt out Gregory H. • Big Sky , MT • December 30, 2018
Ordered a new part. Watched a YouTube video. Fixed it in 15 minutes. Knowing you need to stop the connectors from slipping into the back of the oven was the key. I used paperclips to stop the wires falling through the hole. Easy as ...
Read more
More
$123.69
- Compare At:
-
$145.95
- You Save:
-
$22.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 318178110
The Surface Element is an OEM part for Frigidaire ranges. The small surface element is responsible for providing direct heat to the cookware placed on the corresponding burner of the electric cooktop or range. This element is typically located underneath the glass surface of the cooktop or range, ensuring efficient and even heat distribution for cooking.
Symptoms of a failing Surface Element include:
- The element not heating up at all
- Heating unevenly or only partially
- Noticeable damage or blistering on the element itself
- The control switch not regulating the temperature properly
Causes of a bad surface element can include a burnt-out coil, a break in the element's continuity, or problems with the connection points such as corrosion or loosening. Regular wear and tear from cooking can also lead to degradation over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven surface element went bad Shahlokh K. • Van Nuys , CA • September 21, 2014
Very easy. go online learn how to change the element step by step. order the part and you are all set. I saved $99 of labor cost.
Read more
More
$91.72
- Compare At:
-
$108.23
- You Save:
-
$16.51