Yard Machine Line Mover Start Switch Parts

This starter relay helps start the refrigerator compressor so the unit can cool properly. It replaces a worn or failed relay to restore reliable compressor start-up and reduce repeated clicking or humming. What it does:

• Provides the initial kick to start the compressor motor
• Stops the compressor from stalling during startup
• Commonly used when the fridge hums but doesn't cool or the compressor only clicks on and off
• Helps prevent extended run attempts that can overload the compressor

• One starter relay

• Disconnect power to the appliance before servicing
• Replace only when unit is fully powered down and components are cool to the touch
• Inspect the compressor terminal area for damage or corrosion and clean before installing

This PTC starter helps the compressor start by briefly supplying the correct current at startup, restoring reliable cooling when the compressor struggles to kick on. Compact replacement for failed or weak start devices. What it does

• Provides a timed boost to the compressor start winding so the compressor can start reliably
• Commonly used when a refrigerator or freezer won't start or hums without running
• Helps prevent frequent hard starts that can overheat the compressor
• Passive solid-state design with no moving parts for simple, maintenance-free operation

• Disconnect power to the appliance before inspecting or replacing the starter
• Handle electrical connections carefully; install the starter in the same orientation and wiring position as the original
• If the compressor or start relay shows additional damage, replace those components.

The Refrigerator Door Switch is essential for maintaining the proper operation of your refrigerator. This genuine OEM part ensures that your fridge accurately detects when the door is open or closed, helping to regulate temperature and energy usage effectively. By maintaining the correct temperature, the Refrigerator Door Switch helps keep your food fresh and preserves the longevity of your appliance. Designed for a secure fit, this door switch is compatible with a wide range of Samsung refrigerator models, ensuring easy installation and reliable performance. If your original door switch is malfunctioning, replacing it with this genuine OEM part will restore your refrigeratorGÇÖs functionality and efficiency. Experience peace of mind knowing that your appliance is equipped with a high-quality component that supports consistent cooling and optimal energy consumption. Enhance the reliability of your Samsung refrigerator with the Refrigerator Door Switch , and enjoy a smoothly running kitchen appliance for years to come.

This start device helps the appliance motor get up to speed so the unit starts and runs reliably. It's a direct-fit replacement that restores proper starting operation when the motor hesitates or won't start. What it does:

• Provides the initial boost or timing signal the motor needs to start turning
• Commonly replaces a failed start component when the motor hums but won't begin running
• Helps stop repeated start attempts that can overload the motor or trip protection
• Works as part of the motor starting circuit to ensure smooth startup

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Handle the part carefully and match connectors/terminals to the original during replacement
• Basic hand tools are typically required; keep track of screws and wire routing

This compressor start relay helps the refrigerator compressor start reliably so the appliance can cool properly. It replaces a failed relay to restore normal compressor startup and reduce hard-start symptoms. What it does:

• Supplies the compressor's start winding with a timed boost to initiate motor start
• Helps prevent repeated clicking or humming when the compressor struggles to start
• Commonly used when the refrigerator is warm, not cooling, or the compressor does not run
• Works with the compressor start circuit as a replacement electrical relay

• Disconnect power to the appliance before accessing the compressor or electrical components
• Replace the relay on the compressor terminal block; ensure firm, correct terminal seating
• Inspect the compressor and start capacitor for related faults while servicing

This motor overload (thermal protector) helps protect the washer motor from overheating and motor damage by interrupting power if the motor draws excessive current or gets too hot. It's a simple, compact safety device that restores normal operation once cooled. What it does:

• Senses excessive motor temperature/current and cuts power to prevent motor burnout
• Helps stop motor humming or stalling caused by overload conditions
• Can prevent intermittent starts or trips when the motor overheats
• Resets automatically after the motor cools (depending on motor design)

• Disconnect power to the appliance before starting any repair
• Mounts onto the motor or motor harness per the OEM location; replace the faulty unit like-for-like
• Use basic hand tools; avoid tugging on wires—disconnect connectors carefully

This overload is a compressor protector that helps stop the compressor from overheating or drawing excessive current, keeping the refrigeration system safer and helping prevent premature compressor failure. What it does:

• Opens the compressor circuit when the compressor overheats or draws excessive current
• Helps protect the compressor motor from damage caused by electrical overloads or locked-rotor conditions
• Works with the start device/relay to allow normal compressor starting and operation
• Commonly used when a compressor fails to start, hums, or trips the circuit

• One overload protector

• Disconnect power to the appliance before attempting service
• Handle the part carefully and avoid bending terminals; secure it per OEM mounting method
• If compressor or start components show damage, inspect/replace those parts as well; consider service for sealed-system diagnosis

This compressor start relay helps the refrigerator compressor start reliably, restoring proper cooling performance when the compressor fails to start. Designed to replace the factory start device on compatible Frigidaire compressors. What it does

• Provides the initial boost/current path to spin the compressor motor during startup
• Commonly replaced when the compressor hums but will not start or cooling is intermittent
• Helps prevent repeated hard starts that can overload the compressor
• Works with the compressor's overload to enable normal run operation once started

• One compressor start relay

• Disconnect power to the appliance before servicing to avoid electric shock
• Access compressor terminals at the rear base or service panel per your model's service instructions
• Remove and replace only the relay (verify terminals match and clip securely); do not attempt repairs on the sealed compressor
• If compressor still won't start after replacing the relay, further diagnosis of the compressor, overload, or controls is recommended

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

The Refrigerator Power Relay is an essential component for your bottom-mount Samsung refrigerator. This genuine OEM part operates at 12V and 0.4W, ensuring reliable performance and efficient power management for your appliance. Designed specifically for Samsung bottom-mount refrigerators, this power relay helps maintain optimal cooling by controlling the electrical flow to various components, enhancing the overall functionality of your fridge. Installing the Refrigerator Power Relay can resolve issues such as inconsistent cooling or power interruptions, providing a smooth and dependable operation. Its durable construction guarantees long-lasting use, reducing the need for frequent replacements and offering peace of mind. Compatibility with a range of Samsung refrigerator models ensures a perfect fit and easy installation, allowing you to restore your appliance's performance quickly. By choosing this genuine OEM part, you ensure the highest quality and reliability for your refrigerator, keeping your food fresh and your kitchen running efficiently.

This temperature switch is a thermostat-style switch that senses and controls temperature to help the appliance maintain safe operating temps and proper heating performance. Replace a failed switch to restore normal temperature regulation. What it does:

• Senses temperature and opens or closes the circuit based on set thresholds
• Signals the control system to stop or allow heating to prevent overheating
• Commonly associated with no-heat, intermittent heating, or overheating symptoms
• Acts as a safety/limit device in heating circuits

• One temperature switch

• Disconnect power to the appliance before starting any repair
• Handle terminals carefully; ensure secure electrical connections without bending terminals

This pushbutton switch restores a single button on the appliance control panel so you can reliably send selection or command inputs to the control board. It replaces a worn, stuck or non-responsive panel button. What it does

• Acts as the user-facing pushbutton that completes the control input circuit when pressed
• Sends selection/command signals to the appliance control board or timer
• Common symptom fixer: button that won't register presses or responds intermittently
• Also used when a button is physically stuck, loose, or missing

• Disconnect power to the appliance before beginning service to avoid shock
• Access typically requires removing the control panel or overlay—retain screws and trim
• Verify connector orientation and seating; do not force connectors or terminals

This water level switch detects the washer's water height and signals the control to start and stop filling, helping maintain proper wash cycles and prevent overfilling. What it does:

• Senses water level via a pressure hose and tells the control when to stop filling.
• Can cause continuous filling, overfilling, or failure to advance cycles when faulty.
• Works with the washer's control board and pressure hose to regulate fill actions.
• Intermittent or no fill/no water level detection are common symptoms of failure.

• Disconnect power and water supply before beginning any repair.
• Carefully detach the pressure hose from the switch; replace with correct routing to avoid kinks.
• Inspect and replace a cracked or clogged pressure hose when present; verify hose connection is airtight.
• Test switch continuity with a multimeter per service instructions; refer to the service manual for wiring and diagnostic steps.