Control Knob Parts

The Button is an OEM component specifically designed for select Bosch dishwasher control panels. It initiates cleaning cycles upon end-user selection.

Reinforced polymer caps withstand millions of presses without cracks or splits. Gold-plated contacts provide dependable electrical pathways starting wash sequences. 

Causes requiring replacement commonly relate to prolonged use over decades of wearing through water-resistant barriers. Direct impacts could also unsettle attachment boards necessitating full assembly swapping.

Symptoms  of a bad button include:

• Failure to register selections or improperly engaged cycles  
• Loosened fasteners no longer securely mount interface points
• Cracked or distorted housings exposing internal switch mechanisms

Note: In some cases, the buttons are not all the same and it matters which location/order you put them.

This OEM Bosch replacement button is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on electronically controlled sequences. Proper installation restores intended cycle initiation capabilities.

The Knob is an OEM part for Frigidaire ranges and ovens. It is used to control the temperature and settings for the stove's burners or oven functions, providing an interface for selecting heat levels and cooking modes.

You should replace this knob if it becomes damaged or worn out. Common causes of a bad knob include physical damage from impact, wear and tear from frequent use, or melting due to exposure to high temperatures.

Symptoms of a bad knob include:

• Difficulty turning the knob
• Knob slipping or not staying in place
• Cracks or breaks in the knob
• Inaccurate temperature or setting adjustments

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Knob Assembly is an OEM part for LG ranges. This knob assembly is used to control the temperature and settings of the range's burners. It ensures that you can easily adjust the heat levels to achieve precise cooking results.

Causes of a bad knob assembly can include wear and tear from regular use, accidental damage such as cracks or breaks, or exposure to excessive heat that can warp or deform the knob.

Symptoms of a bad Knob Assembly include:

• Difficulty in turning the knob
• The knob feeling loose or wobbly
• Inaccurate temperature control
• The knob not staying in place

This OEM LG part is also compatible with some Kenmore models.

The Thermostat Knob is an OEM part for GE ranges. This knob allows users to control and adjust the oven's temperature settings, ensuring precise cooking and baking results.  

Causes of a bad thermostat knob include repeated use leading to wear and tear, accidental impact causing cracks or breaks, or fading of the temperature markings making it difficult to set the correct temperature.

Symptoms of a bad thermostat knob include:

• Cracks or visible damage
• Difficulty turning the knob
• Faded or illegible temperature markings

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Knob is an OEM part for Whirlpool washers. This part allows users to select and control the various wash cycles and settings by turning the knob to the desired position. It fits securely onto the washer's control shaft, providing an intuitive and reliable interface for managing the washing machine's functions.

Causes of a bad knob can include regular wear and tear, damage from repeated use, or breakage due to accidental impact. 

Symptoms of a bad knob include:

• The knob not turning smoothly or becoming difficult to turn
• The knob slipping off or not staying securely on the control shaft
• Inaccurate or unresponsive cycle and setting adjustments
• Visible cracks, breaks, or wear on the knob

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement control knob fits the surface burner's infinite switch on compatible ranges and cooktops. It restores smooth on/off operation and precise heat selection while refreshing the appliance's appearance.

• Attaches to the surface element's infinite switch to select OFF through HI settings
• Restores ability to turn the burner on/off and adjust heat levels accurately
• Ideal replacement for knobs that are cracked, stripped, loose, missing, or hard to turn
• Helps ensure the indicator aligns properly with the control panel markings

• Disconnect power and allow all burners to cool before servicing
• Pull the old knob straight off the switch shaft; do not pry against the control panel
• Align the new knob with the shaft and OFF position, then push straight on until fully seated
• Restore power and test each setting for proper engagement and alignment

Color: glossy black. Measures about 1 inch in diameter, and 1 inch deep.

Replace a cracked, stripped, or missing control knob and restore smooth, reliable setting of temperatures and functions. This knob assembly fits the control shaft to provide positive engagement and a refreshed look on the control panel. What it does

• Attaches to the valve or switch shaft to select heat level or function
• Restores proper engagement when the knob is cracked or stripped
• Fixes knobs that spin without turning the control stem
• Replaces loose, hard-to-grip, or missing knobs

• 1 control knob assembly

• Disconnect power and let the appliance cool completely before servicing
• Pull the old knob straight off the control shaft; avoid bending the stem
• Align the new knob's opening with the flat/D-shaped shaft and press firmly until fully seated
• Verify the pointer aligns with the panel markings and test operation

The Knob (STL) is an OEM part for Whirlpool ranges and cooktops. It is used to control the settings of the burners, allowing you to adjust the heat level for cooking. This knob is about 2 inches in diameter. 

You should replace the knob if it becomes damaged or worn out. Causes of a bad knob can include regular wear and tear from frequent use, accidental impact, or exposure to heat, which can cause the knob to crack or become difficult to turn.

Symptoms of a bad knob include:

• Difficulty in turning the knob or adjusting the burner settings
• Knob becoming loose or not staying in place
• Visible cracks or damage to the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: stainless steel. It measures about 2 inches in diameter.

The Burner Control Knob is an OEM part for Whirlpool ranges and cooktops. It is used to control the heat level of the burners, allowing for precise adjustments during cooking. This knob fits securely onto the burner valve stem, providing easy and reliable control over the gas or electric burners.

Over time, the burner control knob can become faulty. Causes of a bad burner control knob include regular wear and tear, exposure to high heat, or accidental impacts that cause the knob to crack or break. A damaged knob can make it difficult to adjust the burner settings accurately.

Symptoms of a bad burner control knob include:

• The knob not turning smoothly or feeling loose
• Difficulty in adjusting the burner flame or heat level
• The knob being cracked, broken, or missing
• The burner not responding to adjustments made with the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: stainless steel. Measures about 2 inches in diameter.

The KNOB ASSEMBLY is an OEM component specifically designed for GE gas ranges. It provides dual interfaces for operating individual burners through an integrated control knob and push button mechanism.  

Symptoms of a bad knob assembly include:

• Loose, difficult to turn, or unresponsive knob/button functions
• Worn graphics and identification labels around the assembly
• Failure to reliably switch burners on or off through pushing motions

Continuous high-heat cooking exposure can degrade the integrity of the assembly over time. Accidental impacts introduce a risk of cracked housings as well. Replacing it with this genuine GE part restores assured burner commands through an appearance-retaining operation.

This OEM GE replacement knob assembly is also compatible with some Kenmore and RCA gas cooktop models. Reliable indication and controls maximize usability cycle after cycle.
 

Color: stainless steel. It measures about 2 inches in diameter.

The Timer Knob is an OEM part for Frigidaire dryers. This part allows users to set and control the drying cycle by turning the timer to the desired setting, ensuring proper operation and timing of the dryer.

Causes of a bad timer knob can include wear and tear from frequent use, physical damage such as cracking or breaking, or the internal mechanism wearing out over time, making it difficult to turn or set the timer accurately.

Symptoms of a bad timer knob include:

• The knob being difficult to turn or slipping
• The dryer not starting or stopping at the correct times
• The timer not advancing through the cycle
• The knob being loose or falling off

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Range Knob is an OEM component for Whirlpool gas ranges. Located on the control panel, this plastic knob adjusts baking temperatures and oven functions like Bake, Broil and Warm. 

Symptoms of a bad range knob include:

• Difficulty rotating knob to numbered settings
• Loose or wobbly feel during selection  
• Faded or illegible printed mode labeling

Causes stem from normal wear over extended use, repeated contact with pot handles, or other impacts compromising sturdiness. 

Replace now with this OEM Whirlpool knob to restore precise oven control. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.