Disconnected Damaged Wire Harness Parts

This harness burner box is the wired ignition assembly that routes spark and power to a cooktop's burner valves and igniters, restoring reliable ignition and consistent burner operation. What it does

• Delivers spark and electrical connection to surface burner igniters and gas valve controls.
• Replaces damaged or frayed wiring that can prevent burners from sparking or lighting.
• Restores proper routing and secure connections to reduce intermittent ignition failures.
• Intended for use with compatible gas range cooktops that use a burner-box ignition harness.

• Designed for experienced DIYers; disconnect power and shut off gas before starting.
• Inspect mating connectors, igniters and valves while installing; replace any visibly damaged components.

This harness connects the burner box wiring to the cooktop's controls and safety devices, ensuring reliable ignition and proper sensor/valve communication. Replaces a damaged or worn burner-box harness to restore safe burner operation. What it does:

• Carries power and signals between igniters, flame sensors/thermocouples, and gas valves
• Supports ignition; failure can cause burners to not light or spark inconsistently
• Prevents intermittent operation caused by frayed wires, loose connectors, or heat damage
• Helps maintain correct sensor feedback for safe gas shutoff

• One burner box wiring harness

• Disconnect power and shut off gas supply before starting any repair
• Match connector styles and routing to the original harness; inspect nearby components for heat damage
• Use proper strain relief and secure fasteners to prevent contact with hot surfaces

This wire harness routes power and signals between an appliance's control and electrical components to restore reliable connections and operation. Use it to replace a damaged or frayed harness that is causing power or control issues. What it does:

• Re-establishes secure electrical connections between controls, motors, switches and sensors
• Routes and organizes multiple wires to prevent shorts and chafing
• Replaces burned, frayed or broken wiring that can cause intermittent operation
• Helps resolve symptoms like no power to controls, unit not starting, or inconsistent function

• Disconnect all power (unplug or switch off circuit breaker) before servicing
• Label or photograph connector locations before removal to ensure correct reassembly
• Route harness to avoid pinch points and secure with original clips or ties
• Replace the harness and inspect mating components if you see melted connectors or damaged terminals

This harness burner box is the wiring assembly that routes power and ignition signals to a gas range's burner box, restoring reliable electrical connections for safe burner ignition and consistent operation. What it does:

• Routes power and ignition signals between the control valve, igniters and burner box components
• Provides factory-style connector interfaces to maintain correct electrical paths
• Helps resolve intermittent or no-ignition issues caused by damaged or loose wiring
• Reduces risk of arcing or shorting from frayed or burned harness wiring

• Always disconnect electrical power and shut off the gas supply before servicing
• Handle connectors gently and seat each connector fully to avoid loose connections
• Inspect surrounding insulation and connectors for heat or burn damage and replace if needed

This 120V replacement power cord restores household current to gas ranges and ovens that use a corded connection for clocks, lights, igniters and controls. It provides a straightforward way to replace a damaged or worn cord and regain safe power to the appliance. What it does

• Supplies 120-volt power from the wall outlet to the range/oven's control system, clock and lights.
• Restores ignition and control functions when a frayed or broken cord prevents the appliance from receiving power.
• Replaces cords that show signs of burning, cracking, loose connections, or exposed wiring.
• Reduces risk of electrical faults caused by damaged insulation or terminals.

• One 120V power cord

• Disconnect power at the circuit breaker or unplug the appliance before starting; ensure the appliance is de-energized.
• Route and secure the cord to avoid pinching; tighten terminal screws to manufacturer torque recommendations.

This power cord service assembly replaces a damaged or worn external cord to restore a safe electrical connection to the appliance. Designed as a direct-replacement assembly for service repairs, it helps return reliable power delivery. What it does:

• Provides the external electrical connection between the appliance and wall outlet
• Replaces frayed, cut, or damaged cords that can cause intermittent power or unsafe conditions
• Helps resolve issues where the appliance does not power on due to cord damage
• Restores proper strain relief and secure wiring at the appliance entry point

• Always disconnect power at the breaker or unplug the appliance before servicing
• Route the cord and secure strain relief per the appliance's service instructions

The Cord is an OEM replacement part for Frigidaire washing machines. Extending from the rear of the unit, it safely powers the washer through a connection to a wall outlet.

Causes of cord failure are normal wear from frequent coiling and plugging/unplugging motions over the appliance's lifespan. Rodents or sharp edges may also damage the outer jacketing.

Signs of a bad cord include:

• Exposed or severed copper wiring visible inside
• External cracks, splits or abrasions eroding the casing  
• Erratic behavior during the wash cycle
• GFCI/EGCI outlet tripping frequently

Compatible models also include Electrolux, KitchenAid, Jenn-Air, and Kenmore options. Maintaining safety is a top priority.

This harness joint is a wiring connector that links two sections of an appliance wiring harness, restoring electrical continuity and reliable signal/power transfer. Use it to replace a damaged, loose, or corroded harness connection. What it does:

• Joins wiring harnesses so power and control signals pass between components
• Restores intermittent or lost electrical connections caused by broken or corroded terminals
• Helps eliminate symptoms like no power to a module, intermittent operation, or communication failures
• Maintains proper routing and strain relief where harness sections meet

• Disconnect power (unplug or shut off breaker) before inspecting or replacing wiring
• Match connector shape and terminal arrangement before installation; secure firmly until it clicks or seats
• Avoid forcing pins; inspect adjacent wires and insulation for damage and replace if needed

A replacement power cord kit that restores the electrical connection for a freestanding range or wall oven, letting the appliance receive mains power safely and reliably. What it does:

• Provides the main AC connection between your appliance and household power
• Replaces damaged, frayed, or burned cords that cause loss of power or intermittent operation
• Helps prevent arcing or poor contact from worn wiring or terminals
• Used when plug, cord insulation, or strain-relief components are defective

• Disconnect appliance from power at the breaker before beginning work
• Inspect terminal block and wire connections; tighten to manufacturer torque if specified
• Route cord and secure strain relief per appliance cabinet opening to avoid pinching

This genuine replacement wire harness connects and routes power and signals between components to restore proper electrical function and safe operation. Designed to match original wiring layout for a straightforward repair. What it does:

• Replaces a damaged or burned wiring harness to restore electrical continuity
• Restores power/signal paths that can stop intermittent operation or failures
• Helps eliminate arcing, shorts, or loss of function caused by frayed or broken wires
• Maintains correct routing to prevent chafing and overheating when installed correctly

• Disconnect all power (unplug appliance or switch off breaker) before starting work
• Handle connectors by the plug body, not the wires; ensure secure, full seating of terminals
• Route harness along original clips and channels to avoid pinch points or hot surfaces
• Replace any connector, terminal, or mounting hardware that is missing or damaged before powering on

This wire harness connects the appliance's control and power components to restore proper electrical routing and signal transfer. Replace a damaged harness to fix intermittent power, unresponsive controls, or burned/melted wiring concerns. What it does:

• Routes power and control signals between the control board, motors, switches, and sensors
• Replaces frayed, burned, or broken wiring that can cause intermittent operation or no power
• Prevents poor connections that lead to error codes, failed cycles, or component failures
• Restores factory wiring layout for reliable operation and safer electrical paths

• Disconnect power (unplug or switch off breaker) before starting any repair
• Match connector shapes and pin counts; do not force connectors into place
• Route harness along original clips and channels to avoid chafing or heat exposure

This replacement power cord restores the appliance's main AC connection so it can receive power safely. Use this cord when the original cable is frayed, cut, melted, or otherwise damaged to prevent intermittent power or electrical hazards. What it does:

• Replaces the appliance's factory power cable to restore reliable electrical connection.
• Transmits mains power from the outlet to the appliance's internal wiring and controls.
• Addresses symptoms such as no power, intermittent power loss, visible cord damage, or burn/melt marks at the cord or plug.
• Helps prevent electrical arcing or shorting caused by damaged insulation or exposed conductors.

• Disconnect the appliance from power at the breaker or unplug before starting any work.
• Verify the cord matches the appliance's connector and routing; do not modify cord ends or splices.
• Secure all strain reliefs and terminal connections per the appliance's service instructions.

This single-conductor replacement wire restores an electrical connection between components in compatible Whirlpool appliances. It's a straightforward part used when a damaged or broken wire prevents normal operation. What it does

• Carries electrical current between terminals or components to enable operation.
• Replaces frayed, broken, or heat-damaged wiring that can cause intermittent or no power to a component.
• Common symptom: affected circuit or component won't power on or works sporadically.
• Helps re-establish a reliable connection when the original wire is corroded or has a broken conductor.

• Disconnect power (unplug appliance or shut off circuit breaker) before starting any repair.
• Use proper wire connectors/crimping techniques and ensure secure, insulated connections.
• Verify correct routing and strain relief to avoid contact with moving parts or heating elements.

The Refrigerator Wire Harness Relay is an essential component designed to ensure your Samsung refrigerator operates smoothly and efficiently. This genuine OEM part guarantees a perfect fit and reliable performance, maintaining the integrity of your applianceGÇÖs electrical system. Crafted with high-quality materials, the wire harness relay effectively manages the flow of electricity within your refrigerator, preventing potential issues such as power disruptions or component failures. By replacing a faulty relay with this authentic part, you can restore your refrigerator's functionality and extend its lifespan without compromising on quality. Compatible with a wide range of Samsung refrigerator models, this wire harness relay simplifies the repair process, allowing for easy installation and seamless integration with your existing setup. Investing in this genuine OEM part not only enhances the performance of your refrigerator but also ensures peace of mind, knowing that your appliance is equipped with reliable and trusted components. Whether youGÇÖre a DIY enthusiast or seeking professional-grade parts, the Refrigerator Wire Harness Relay provides the dependable solution you need to keep your refrigerator running optimally.

This electrical wiring harness routes power and signals between components to restore reliable electrical connections. It replaces a damaged or worn harness to correct intermittent power, nonresponsive controls, or component failures. What it does:

• Carries electrical power and control signals between appliance modules and components
• Restores lost or intermittent electrical continuity caused by frayed wires or broken connectors
• Helps resolve symptoms like lights or components not powering on, sporadic operation, or control failures
• Maintains factory routing and connector fit for proper electrical performance

• Disconnect power before attempting any repair to avoid shock or damage
• Compare connectors and wire colors to the old harness to ensure correct replacement
• Use proper strain relief and routing to prevent chafing or pinching of wires