15 Gear Parts

Right Side. For left side use part number WPW10251050.

Includes two rollers and axles for the upper dishwasher rack. Color: white. Each wheel measures about an inch in diameter, and with the axle clipped to it, it's about an inch wide.

Color: brown. Each prong measures about 4-1/2 inches from the center.

Color: light gray. Measures about 3 inches high by 6 inches deep.

The Turntable Coupler is an OEM part for GE microwaves. This component connects the turntable motor to the microwave's glass tray, enabling the rotation of the tray during cooking. By ensuring even heating and cooking of food, the turntable coupler plays a vital role in the microwave's overall performance.

Causes of a bad turntable coupler can include wear and tear from frequent use, physical damage from heavy or uneven loads on the turntable, or breakage from accidental impacts.

Symptoms of a bad Turntable Coupler include:

• The turntable not rotating
• Uneven cooking or heating of food
• Grinding or clicking noises when the turntable attempts to move
• The glass tray being unstable or slipping off the coupler

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This agitator drive shaft sits inside the washer's gearcase and transfers motion to the agitator. Replacing a worn or stripped shaft restores firm engagement and reliable wash action while helping reduce slip and grinding during agitation.

• Transfers oscillating motion from the transmission to the agitator
• Provides the splined interface that engages the agitator/coupler
• Common symptoms include no agitation, intermittent/slipping agitation, or grinding/clicking from the gearcase
• Visible wear, rounded splines, or a bent shaft can lead to a loose or non-moving agitator

• Disconnect power and water; use proper PPE
• Requires removing the cabinet and gearcase; drain and reseal the gearcase per service procedures
• Keep gears, spacers, and clips in order; reassemble in the original orientation
• Inspect mating parts (agitator coupler/splines, drive block, seals) and replace if worn

This Bottom Hinge Pin supports the refrigerator door at the lower hinge, providing a smooth, stable pivot. Replace a worn or bent pin to restore proper door alignment, closing action, and gasket sealing.

• Serves as the pivot point for the door on the bottom hinge bracket
• Helps maintain alignment so the door gasket seals correctly
• Wear/failure symptoms can include door sagging, wobble at the hinge, squeaks or grinding, and poor self-closing
• Replacing a damaged pin can reduce hinge play and improve door operation

• Disconnect power; turn off water supply if working near a dispenser line
• Remove items from the door and support the door to prevent strain on hinges
• Detach bottom hinge fasteners, lift door off, replace the pin, and reassemble
• Adjust hinges as needed

Comes with 4 supports. Color: chrome.

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

This joint assembly is the connector that joins two refrigerator water tubes to form a tight, leak-resistant seal. Replace it to stop leaks at a line coupling and restore reliable dispenser and icemaker water flow.

• Connects two plastic water lines within the refrigerator's water system
• Maintains a watertight seal to prevent drips and air intrusion
• Common fix for leaks at a coupling or tubing that won't stay seated
• Symptoms include slow/sputtering dispenser, small/no ice production, or visible seepage at the connector

• Unplug the refrigerator and shut off the water supply before servicing
• Dispense water to relieve line pressure
• Depress the connector collar to release the tubing; cut damaged tube ends square and fully insert tubing until it bottoms out
• Restore water and power, then check all connections for leaks

The Microwave Coupler is an essential component for maintaining your Samsung microwave's performance. This genuine OEM part ensures a precise fit and reliable connection, compatible with a variety of Samsung microwave models. Crafted from high-quality materials, the coupler provides durable support, enhancing the stability and functionality of your appliance. By replacing a worn or damaged coupler with this genuine OEM part, you can restore your microwaveGÇÖs efficiency and prevent potential operational issues. Installation is straightforward, making it an ideal choice for DIY repairs and helping you save time and money. The Microwave Coupler not only ensures your microwave operates smoothly but also extends the lifespan of your appliance. Trust in this high-quality part to deliver dependable performance and improve your overall kitchen experience.

Attaches to the inner tub for the upper rack

This rear support wheel replaces a worn roller that helps a sliding drawer or rack glide smoothly and stay aligned. Restores easy, even movement and reduces dragging, scraping, or tilting during everyday use.

• Supports the rear of a sliding assembly on its track
• Provides smooth rolling action and helps maintain alignment
• Helps prevent binding, popping off the track, or uneven travel
• Replace if the wheel is cracked, flattened, missing, or if movement is noisy or difficult

• Disconnect power before servicing; allow the appliance to cool
• Remove the sliding assembly to access the wheel area
• Transfer or reinstall any axle/retainer from the original wheel as needed
• Verify smooth travel and proper alignment after replacement

Left side. For right side use part number WPW10251051.

Guide roller (TT) supports the appliance drum and keeps it aligned for smooth rotation. Replacing a worn guide roller reduces noise, prevents rubbing, and helps restore proper drum tracking. What it does:

• Supports and guides the drum/tub so it spins smoothly and stays centered.
• Reduces metal-on-metal rubbing and squeaking caused by worn rollers or bearings.
• Helps prevent uneven wear on the drum, belt, and seals.
• Improves drum tracking and overall operation when worn or damaged.

• Disconnect electrical power (and turn off gas supply on gas models) before starting any repair.
• Access may require removing the dryer cabinet or drum.
• Inspect other rollers, shafts, bearings, and the drive belt; replace as needed to avoid repeat failures.
• Use appropriate hand tools and support the drum during removal to avoid damage or injury.

Color: brown. Each prong measures about 4-1/2 inches from the center.