Ngm8654uc Parts

Used to hold down the jet holder assembly.

The Screw Range is an OEM component specifically designed for Bosch ranges. These screws serve to securely mount and assemble different components within the oven cavity. 

The screw range plays a crucial role in ensuring internal structures and assemblies are firmly fastened in their correct positions. Proper installation with this screw set guarantees tight tolerances and optimal heat distribution throughout the cooking and baking cycles.

Causes of faulty screws can include wear and tear over time resulting in loosened fits, cracks or heads shearing off due to repeated heating and cooling. 

Symptoms of loose or damaged screws include:

• Drooping or sagging racks and shelves  
• Components shifting positions or coming loose
• Inconsistent or uneven cooking results

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models. Replace yours today to maintain your range's integrity.
 

The Spark Switch is an OEM part for Bosch ranges. This part ignites the burners by sending a signal to the spark module, which then produces the spark needed to ignite the gas.  

Causes of a bad spark switch can include wear and tear from regular use, damage from spills or cleaning agents, or electrical issues.  

Symptoms of a bad spark switch include:

• Burners not igniting
  Continuous clicking even after the knob is turned off
  No spark when attempting to ignite the burner
  The cooktop not producing a flame

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Ignition Device is an OEM part for Bosch gas cooktops. This ignitor is responsible for sparking the burners to safely ignite the gas flow and initiate the cooking process.

The ignition device works through a high-voltage electrical arc that produces a spark near each gas burner valve whenever a cooktop burner is turned on. This spark reliably ignites the gas, allowing full and consistent burner flame.

Causes of a bad ignition device can include defects in the electronic components, wear and tear of the electrode tips over time, or issues preventing a strong enough spark from occurring.

Symptoms of a bad ignition device include:

• Burners that will not light or remain lit
• Repeated lighting attempts required before a flame is produced
• Inconsistent or intermittent ignition between burners
• Burners that light but then extinguish unexpectedly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This ignition device generates the high-voltage pulses that light your gas cooktop or rangetop surface burners. Replace a failed module to restore fast, dependable burner ignition when you turn the knob.

• Supplies high-voltage spark to ignite the surface burners
• Common symptoms include no click/no spark on any or multiple burners
• Intermittent or weak sparking; burners require multiple tries to light
• Can help restore consistent ignition performance after module failure

• Disconnect power and shut off gas before servicing
• Access location varies by model; typically under the cooktop or behind a panel
• Move wires from the old module to the new one one at a time to avoid miswiring
• Inspect igniter electrodes, burner caps, and wiring; clean/replace if damaged for best results

Note: Kit includes 4 feet and a tube of RTV with instructions.

A replacement electrical switch that restores on/off control to the appliance circuit. Installs in place of a failed factory switch to return reliable power signaling for the affected function. What it does:

• Interrupts or completes the electrical circuit to control a specific appliance function.
• Replaces a failed or intermittent switch that can cause the appliance or a specific feature to not power on.
• Common symptom fixes: appliance not starting, intermittent operation, or unresponsive buttons/controls.
• Matches the original switch form and terminals for direct replacement when the part number is correct.

• Disconnect power (unplug or breaker off) before beginning any work.
• Photograph or label wiring before removal to ensure correct reconnection of terminals.
• Make secure, insulated connections; avoid exposed wiring.
• Test the appliance function after reinstalling power.

The Knob Set is an OEM part for Bosch cooktops. This set includes the burner knobs designed to control the heat settings of your cooktop burners. The knobs allow you to easily identify and adjust the desired heat level for each burner.

A bad burner knob can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty knob include cracks, loose or wobbly fit, or difficulty in turning the knob smoothly.

Symptoms of a bad knob include:

• Cracks or visible damage 
• Loose or wobbly fit 
• Difficulty in turning the knob 

Replace your worn-out or damaged knobs with this genuine OEM Bosch part to restore your cooktop. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Knob Set is an OEM part for Bosch cooktops. This set includes four burner knobs designed to control the heat settings of your cooktop burners. The knobs allow you to easily identify and adjust the desired heat level for each burner.

A bad burner knob can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty knob include cracks, loose or wobbly fit, or difficulty in turning the knob smoothly.

Symptoms of a bad knob include:

• Cracks or visible damage 
• Loose or wobbly fit 
• Difficulty in turning the knob 

Replace your worn-out or damaged knobs with this genuine OEM Bosch part to restore your cooktop. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This gas pressure regulator reduces and stabilizes the incoming supply to your appliance's manifold, helping ensure consistent burner and oven performance. Replacing a failing regulator can correct weak, fluttering, or uneven flames that affect multiple burners. What it does:

• Regulates inlet gas to a steady, appliance-safe manifold pressure
• Helps maintain consistent flame height and heat across burners and in the oven
• Can address symptoms like all burners running low, surging flames, or poor overall heating
• If only one burner is affected, the regulator is unlikely the cause; check that burner/valve first

• 1 gas pressure regulator

• Disconnect electrical power and shut off the gas supply before servicing
• Install with the flow arrow oriented toward the appliance; support piping and use approved thread sealant on threaded connections
• After installation, restore gas and check all joints for leaks using an approved leak-detection solution

The Cooktop Bracket Kit is an OEM part for Bosch cooktops. This bracket and hardware kit serves to securely fasten the cooktop surface to the underlying countertop.

Causes of a bad bracket can include wear and deformation from heavy cooktop use over time, or damage to fastening screws from accidental impacts.

Symptoms of a bad bracket and fastening kit include:

• The cooktop surface becoming loose, wobbly, or unstable during use
• Gaps appearing between the cooktop and countertop edges
• Reduced heat containment and risk of burns from loose surfaces

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This grate foot assembly installs on the underside of a gas cooktop or range grate to cushion and stabilize it. Replacing worn or missing feet helps protect the surface and keeps cookware level while you cook.

• Cushions contact between the grate and cooktop surface
• Helps keep the grate from sliding and reduces rattling
• Maintains proper grate height for stable, level cookware
• Common symptoms: wobbling/rocking grate, missing or hardened feet, scratches on the surface

• Allow the cooktop and grates to cool completely before servicing
• Remove the grate, pull off the old foot, and clean the mounting area
• Press the new foot firmly into place; if your model uses an adhesive or retainer, follow the manufacturer's cure time before using the burners
• For best results, replace all feet on a grate at the same time and it sits flat

The Burner is an OEM part for Bosch cooktops and ranges. This part provides reliable and consistent heat for cooking. This burner is specifically engineered to distribute flame evenly, ensuring optimal cooking performance. 

Causes of a bad Burner can include clogging from food spills or debris, which blocks gas flow and affects flame quality and consistency.  

Symptoms of a bad Burner include:

• Uneven flame or low flame output, which can lead to poorly cooked food
• Difficulty lighting the burner, indicating potential blockages or issues with the gas supply
• Excessive sooting or yellow flame, which suggests incomplete combustion typically caused by clogs or improper gas-air mixture
• Noticeable rust or physical damage that can prevent proper seating or alignment of the burner

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This valve is a water-flow control assembly that opens and closes to direct water where the appliance needs it. Replacing a worn valve restores proper water delivery and helps stop intermittent filling or leaks. What it does:

• Opens and closes to control water flow into the appliance
• Enables timed or sequence-based filling during cycles
• A faulty valve can cause no-fill, overfill, or continuous filling symptoms
• Prevents unintended water flow when functioning correctly

• One valve assembly

• Disconnect power and shut off the water supply before starting
• Handle electrical connections and seals carefully; replace any damaged gaskets
• Test for leaks and correct operation before returning the appliance to service

The Knob-Selecting part is an OEM part for Bosch cooktops. It makes up an individual burner control knob.

Causes of a bad knob can include wear and tear from ongoing turning motions over the cooktop's lifespan. Plastic knob components experience repeated stress from hand adjustments.

Symptoms of a bad knob include:

• Looseness, wiggle or difficulty securing settings at the chosen heat level
• Illegible or faded temperature labels obscuring burner identification
• Potential gas leaks if knob seals are degraded allowing pilot light issues

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Repair-Set is an OEM part for Bosch cooktops. This set includes precision-engineered nozzles that are crucial for the correct mixing of air and gas before combustion, which ensures efficient and even heating. The Venturi nozzles are key components in maintaining the performance and safety of gas cooktops, facilitating the proper flame size and consistency necessary for various cooking needs.

Causes of a bad burner Venturi nozzle can include clogging due to food spills or cleaning products, natural wear and tear, or improper initial installation.  

Symptoms of a malfunctioning Venturi nozzle include:

• Irregular flame size or color
• Weak or uneven heating
• Excessive soot or yellow flames indicating incomplete combustion

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.