Need Help?
Call or text
Replace a broken, cracked, or missing control knob on your cooktop. This dial installs on the control panel to adjust burner settings and temperature.
The knob I ordered from you was well photographed from all angles. I was pretty confident that even if it wasn't the same part it would do the job. I took the old knobs off and placed the new ones on. They were slightly smaller than the original but work great! Read more
Burner won't light or igniter keeps clicking? This cooktop igniter creates the spark to ignite gas burners. DIY repair. Video guide available.
My 18+ year old Jennair cooktop, PN CCG2520W was in need of a rebuild b/c of a welded venturi tube on the right front [RF] burner. In order to remove the glass top cover, you MUST remove the venturi tube. To do this you have to DRILL-OUT the venturi tube which requires a new venturi and orifice holder. The repair was difficult b/c most of the parts are no longer available. But then I found a ray-of-hope. I was able to find some Jennair (Maytag) parts but they are scarce. Later I found... Read more
Venturi tube for gas ranges and cooktops. Mixes gas and air for proper burner combustion. Replace if cracked, corroded, or threads are damaged.
Brass nut secures the jet holder assembly on gas ranges and cooktops. Replace if stripped, corroded, or damaged during burner maintenance or repair.
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine! Read more
Replacement jet holder for gas range and cooktop burners. Secures the orifice and channels gas flow. Order when original is corroded, damaged, or broken.
The oven was not heating, and there was no gas flow to the oven or spark. I replaced the spark igniter, but that did not fix it, so the problem was either the ignition device or the oven bake solenoid. In order to get to them, I had to cut the venturi tubes which hold down the burner rings with a Dremel tool, which was easy enough. There is no other way to get these tubes out if they are stiff or seized as you will simply twist the gas supply line to the burner if you try to rotate the nut.... Read more
Black bezel plate that installs under cooktop control knob. Replaces cracked, worn, or faded bezels with missing markings. 2-inch diameter trim ring.
Replaced the bezel's Read more
Fix burners that won't light or won't stop clicking. This spark module generates the high-voltage pulse needed for reliable gas ignition on your cooktop.
Mounts in the burner assembly to position and secure the orifice. Replace if cracked, broken, or worn to restore proper gas alignment and sealing.
Secures your cooktop to the countertop from below. Includes brackets and hardware. Replace if worn, deformed, or screws are damaged or missing.
Bought parts needed. Quick turn around from y'all. All is good cause mama's happy. Read more
Air-gas mixing tube that connects the orifice to the burner head on gas cooktops. Replace if clogged, damaged, or missing to restore proper flame mixing.
This 13.7 mm venturi tube mixes gas with air for proper cooktop burner operation. Replace if original is clogged, damaged, or needs removal for repairs.
Burner won't light or no gas flow? This range top burner valve controls gas to individual burners. Common repair for ignition and flow issues.
Replaced solenoid Read more
Mounting plate that restores proper support and alignment for lawn tractor components. Replace if your original plate is bent, cracked, or missing.
Secures the jet/nozzle assembly in proper position on your cooktop. Replace if cracked, loose, or missing to restore correct alignment.
Fix unresponsive or inconsistent mower controls with this potentiometer switch. Restores precise setting adjustment by regulating resistance in the circuit.