Pfss9pky Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments. 

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster. 

Symptoms of a burnt out refrigerator light bulb include:

• Dim or no light illuminating inside refrigerator shelves  
• Shadows and dark spots making it difficult to find items
• Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models. 

The Asm Gasket Door Fre is an OEM part for GE refrigerators. This assembly gasket is designed to create an airtight seal around the refrigerator door, preventing warm air from entering and helping to maintain the internal temperature, which is crucial for keeping food fresh.

Causes of a bad door gasket can include regular wear and tear from frequent door openings and closings, damage from cleaning, and exposure to temperature fluctuations. Over time, the gasket may become brittle, crack, or develop mold, compromising its ability to seal properly.

Symptoms of a bad door gasket include:

• Warm air entering the refrigerator, causing increased internal temperatures
• The refrigerator running more frequently or for longer periods
• Visible cracks, tears, or mold on the gasket
• Difficulty in closing the refrigerator door securely

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Bucket Assembly is an OEM part for GE refrigerators. It collects and stores ice produced by the ice maker, ensuring a steady supply of ice is readily available for use. This assembly includes the bucket itself, along with any necessary components to fit securely within the freezer.

The ice bucket assembly may need to be replaced if it becomes cracked, damaged, or no longer fits properly. Causes of a bad ice bucket assembly can include general wear and tear, dropping or mishandling the bucket, or exposure to harsh temperatures causing the plastic to degrade.

Symptoms of a bad ice bucket assembly include:

• Cracks or visible damage to the bucket
• Ice not being properly stored or dispensed
• The bucket not fitting securely in its designated place
• Leaks or ice buildup around the bucket area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is an ice chute and funnel assembly for refrigerators with ice dispensers on their doors. The chute opens upon the user's command input and releases ice into a glass or other container placed underneath it. With use, because of misuse, or as a result of accidental damage, part or all of the ice chute door and funnel may malfunction or fail entirely. When this happens, a replacement part is required to continue using the ice dispensing feature.If the ice chute no longer dispenses ice, or if it is dispensing too much or too little ice, it's a good indication that there is something wrong with this part of the appliance. It's a quick repair. It is always recommended to unplug the device before beginning the replacement. Move any food that could spoil while the repair is being completed.This refrigerator ice dispenser ice chute door and funnel assembly is a genuine OEM replacement part. It is sourced directly from the manufacturer. It is sold as an individual unit and made of durable materials. The replacement part is compatible with several models of refrigerators manufactured by General Electric, Hotpoint, and RCA.

The Vegetable Cover Assembly is an OEM part for GE refrigerators. This cover sits over the vegetable crisper drawers, providing a flat surface for storage while helping to maintain optimal humidity levels inside the drawers to keep produce fresh. The cover typically includes a glass insert and a frame that holds it in place.

Over time, the vegetable cover assembly can become damaged or worn out due to regular use. Common causes of a bad cover assembly include cracking or breaking from heavy items being placed on it, wear and tear from frequent opening and closing of the drawers, or accidental impact.

Symptoms of a bad vegetable cover assembly include:

• Cracks or breaks in the cover or frame
• Difficulty in sliding the drawers in and out
•  Reduced freshness of stored produce due to improper humidity control

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Maker is an OEM part for GE refrigerators. This component is responsible for producing ice cubes by filling the ice mold with water and freezing it until the ice is ready to be dispensed.

Causes of a bad ice maker can include wear and tear from regular use, issues with the water supply, or mechanical failures within the unit.

Symptoms of a bad ice maker include:

• No ice production
• Smaller than usual or misshapen ice cubes
• Leaks or water pooling inside the freezer
• Unusual noises during the ice-making process

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This water fitting connects refrigerator water lines to keep the dispenser and icemaker supplied. It replaces a worn or leaking connector so your fridge can maintain a reliable, drip-free water path.

• Joins water tubing for the dispenser/icemaker circuit
• Helps resolve leaks at the connector or along the water line
• Can restore weak/no water flow caused by a damaged fitting
• Maintains a secure, food-safe connection under normal household water pressure

• Unplug refrigerator and shut off the water supply before servicing
• Place a towel or container to catch residual water
• Depress/loosen the connector collet to release tubing; cut ends square and fully seat lines when installing
• Check for leaks after restoring water and power

This temperature sensor monitors internal refrigerator temperatures and relays them to the control, helping the unit maintain consistent cooling. Replacing a failed sensor restores accurate temperature regulation and more reliable operation. What it does:

• Measures compartment or evaporator temperature and sends a resistance signal to the control board
• Helps the control modulate compressor and fan run times for proper cooling
• Typical failure signs: sections too warm or too cold, erratic temperatures, or running longer than normal
• Causes inaccurate temperature readings compared to setpoints

• 1 temperature sensor assembly

• Disconnect power before servicing
• Access the sensor in the affected section; release any cover/clip and unplug the connector
• Route the new sensor's wiring like the original and ensure it's fully seated in its holder or clip
• Restore power and allow up to 24 hours for temperatures to stabilize

Water filter head and tubing assembly holds the water filter and connects the water lines to the water filter. Approximate dimensions: 13.6" x 12.7" x 4.6"

This water tank assembly is the refrigerator reservoir that stores and delivers water to the dispenser and ice system. Replacing a damaged tank helps restore proper water flow and prevents intermittent dispensing or leaks. What it does:

• Stores potable water for the dispenser and ice maker.
• Feeds water to dispenser/ice system when inlet valves open.
• Commonly replaced for cracks, leaks, or a reservoir that won't hold water.
• Can resolve weak or slow water flow from the dispenser.

• Disconnect power and shut off the water supply before starting work.
• Drain remaining water from lines and the tank to minimize spills.
• Handle the plastic tank gently to avoid damage; basic hand tools are typically required.

This freezer thermistor is the temperature sensor located in the freezer compartment. It sends temperature feedback to the control so the compressor, fan, and defrost cycle operate correctly, helping maintain consistent freezing performance and stable food storage.

• Monitors actual freezer temperature and changes resistance to signal the control board
• Helps regulate compressor and evaporator fan operation to achieve the set temperature
• Provides input for defrost timing to limit frost buildup and avoid warm swings
• Common failure symptoms: freezer too warm or too cold, temperature fluctuations, long run times, or excessive frost

• Unplug the refrigerator before servicing; work with dry hands and proper lighting
• Access the freezer sensor location; note original orientation and wire routing
• Transfer any mounting clip/holder to the new sensor and seat the connector fully; route wires exactly as original to avoid damage
• Restore power and allow up to 24 hours for temperatures to stabilize

This damper motor assembly controls the refrigerator air damper to help regulate airflow between compartments, restoring proper temperature balance and reducing uneven cooling when the original motor fails. What it does:

• Moves the air damper to open or close airflow between freezer and fresh-food sections
• Allows the fridge control to direct colder or warmer air as needed for temperature regulation
• A faulty unit can cause symptoms like warm or inconsistent fresh-food temperatures, reduced cooling performance, or unusual clicking/noise at the damper area

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Access typically requires removing interior panels or shelving to reach the damper housing
• Align the motor drive and damper linkage; don't force gears or clips when installing
• After installation, restore power and verify damper movement and temperature control operation

This motor cover protects the damper motor assembly, keeping the motor and linkage free from debris for reliable vent operation. It helps shield internal components to reduce wear and prevent foreign object interference. What it does

• Guards the damper motor and linkage from dust, crumbs and other debris
• Maintains proper clearance around the motor to help consistent damper movement
• Can reduce rattling or contact noise caused by loose components
• Useful when replacing a cracked, broken or missing motor cover

• One motor cover

• High-level replacement: remove power, access the damper assembly, remove fasteners, swap the cover, and reassemble
• Always disconnect power before servicing to avoid electrical shock
• Keep track of screws and any small parts during disassembly
• If the damper motor or linkage are damaged, replace those components rather than relying on the cover alone

This is a self-tapping screw used to secure appliance panels and small components. It provides a reliable hold in sheet metal and plastic mounting points to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens trim, brackets, and light-duty panels where a tapped hole is needed
• Creates its own threads in thin metal or plastic mounting points
• Helps stop vibration-related noise by securing loose panels
• Commonly used during repairs of control panels, inner liners, and external trim

• One tapping screw as shown

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Drive straight and stop when snug; over-tightening can strip the mating material
• Turn power off and unplug the appliance before accessing internal panels
• If the original hole is damaged or oversized, consider using a slightly larger fastener or repair insert per manufacturer guidance

The Main Control Board Assembly is an OEM replacement part for GE refrigerators. This control board manages tasks such as temperature control, defrost cycles, and compressor operation, ensuring optimal cooling performance and energy efficiency.

A bad main control board assembly can occur due to electrical issues, component failure, or damage to the board itself. If you notice symptoms such as erratic temperature readings, frequent cycling of the compressor, or unresponsive functions, it may indicate a need to replace the control board assembly.

Symptoms of a bad main control board assembly include:

• Erratic temperature readings
• Frequent cycling of the compressor
• Unresponsive functions

Restore your refrigerator by replacing the faulty main control board assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.