Gfc750f Parts

The Disposer Splash Guard and Stopper Kit is an OEM replacement part for GE garbage disposers. It includes replacement splash guard rings and stopper balls that fit beneath the disposer mount. These parts work to contain odors, drain water, and direct sound down the drain during operation.

Over time, the splash guard and stopper can wear out due to continuous exposure to food waste, water, and cleaning chemicals. Damage or deterioration of these components can lead to ineffective sealing, allowing water and debris to splash out or preventing the stopper from forming a tight seal.

Symptoms of a bad splash guard and stopper kit include:

• Water or food particles splashing out from the disposal
• Difficulty in plugging the sink for filling with water
• Unpleasant odors due to trapped food particles around the splash guard
• The stopper not fitting securely in the disposal opening

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Sink Flange Mounting Kit is an OEM part for GE garbage disposers. As a complete kit, it contains the necessary sink flange rings, gaskets, seals, and mounting hardware to properly install or replace a disposer unit under the kitchen sink. Securely fastening the flange to the sink drain opening, affords a sturdy connection point for attaching the disposer mechanism.  

Symptoms of a bad or worn-out sink flange mounting kit include:  

• Looseness, wobbling, or movement of the disposer unit when in use
• Leaks detected around the flange seal or mounting area  
• Strong vibrations being transmitted to surrounding sink components
• Difficulty removing or installing the disposer due to improper fitting

This OEM GE replacement kit prevents any installation issues by providing all new mounting pieces engineered to specification. Compatible brand disposers also include InSinkErator, Badger, Waste King, and selected Kenmore models.
 

This fiber flange gasket seals the food waste disposer's sink flange to the sink opening, helping prevent seep leaks and keeping the mounting secure. Replace it if the original is brittle, missing, or you notice moisture around the drain.

• Creates a watertight seal between the sink flange and the sink/mounting assembly
• Helps stop drips and seepage at the top of the disposer
• Restores a secure, properly aligned connection during flange/disposer reinstallation
• Typical symptoms: moisture under the sink near the drain, recurring leaks after tightening, a cracked or deformed gasket

• Disconnect power to the disposer at the breaker before beginning work
• Support the disposer, loosen the mounting ring, and remove the sink flange components
• Clean and dry mating surfaces; position the new gasket per your installation manual and reassemble
• Fill the sink to check for leaks before restoring power

The Disposer Drain Elbow Kit is an OEM part for GE garbage disposers. Containing two drain elbows and requisite seals, this kit replaces key drain components under the sink.

Symptoms of a bad Disposer Drain Elbow Kit include:

• Leaks at drain connections allow water to enter cabinets
• Inability to efficiently drain wastewater from the disposer unit 

Causes can be deterioration of rubber seals after years of chemical exposure. Mineral buildup may obstruct internal elbow passages.

This OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models. 

Replacement batch-feed disposer stopper assembly that restores the disposer's sealing cover and helps contain food scraps during use. Fits batch-feed disposal openings and provides a secure closure to reduce leaks and splashing. What it does:

• Seals the sink/disposer opening so water and debris stay contained during batch-feed operation.
• Replaces cracked, warped, or missing stoppers that fail to hold water or sit securely.
• Helps prevent food and liquids from escaping into the sink while the disposer is in use.
• Restores the intended stopper function on batch-feed disposers that require a cover to operate properly.

• Turn off power to the disposer at the wall switch and/or circuit breaker before starting.
• Remove the old stopper assembly and clean the sink opening and flange area.
• Press the new stopper into place, ensuring a snug fit; test sealing with water.

This support ring is a direct-replacement cooktop component that helps stabilize the burner assembly and keeps burner caps and grates seated correctly for even heating and safe use. It restores proper fit and reduces wobble. What it does:

• Holds the burner/burner cap in the correct position to ensure even flame distribution and stable cookware
• Prevents the burner cap or grate from rocking or shifting during use
• Reduces rattling or movement when burners heat and cool
• Helps keep the cooktop surface sealed and aligned to avoid food/trip hazards

• Disconnect power to the appliance or shut off gas (safety first) before servicing
• Remove burner grate and cap to access the support ring; some models snap into place
• Use basic hand tools only if needed; avoid forcing parts to prevent damage

Color: black. It measures about 3 inches in diameter.

Color: black. It measures about 3 inches in diameter.

This hopper screw is the auger-style screw that moves material through the appliance's hopper, restoring proper feed and consistent dispensing. Replaces a worn, bent, or damaged hopper screw to help reduce jams and uneven delivery. What it does:

• Transports material from the hopper to the next stage for consistent feeding
• Helps prevent bridging and jams caused by a worn or bent screw flight
• Restores even, measured dispensing when the original screw is damaged or stripped
• Reduces scraping or grinding noises associated with a damaged auger

• Disconnect power and water (if applicable) before starting any repair
• Inspect surrounding bearings, bushings, and seals for wear while replacing the screw
• Use basic hand tools; avoid over-tightening fasteners that secure the screw