Gss20gewp Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Ge part

Temperature Sensor

4.9 (310)

By: Ge

Part Number: WR55X10025

The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.

Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.

Symptoms of a bad Temperature Sensor include:

The refrigerator or freezer not maintaining the set temperature
The appliance running continuously or more frequently than normal
Inaccurate temperature readings displayed

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Fridge too cold
Too warm
Fridge runs too long
Freezer too cold

Do-It-Yourself Stories from Customers like You Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately Eddie R. • Debary , FL • January 06, 2015

I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more

$16.30

Compare At:: $22.39
You Save:: $6.09

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Electromechanical Icemaker Kit

4.9 (165)

By: Ge

Part Number: WR30X10093

The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.

Symptoms of a faulty electromechanical kit include:

Ice not being produced or dispensing properly
The ice maker failing to turn on or stop automatically
Strange noises emanating from the ice maker

Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.

This part fixes the following symptoms

Ice maker not making ice
Ice maker won't dispense ice
Leaking

Do-It-Yourself Stories from Customers like You No ice and leaking water Jeff P. • Pinecrest , FL • November 01, 2019

Much easier than expected, I was certain it had to be a water line but the solved everything Read more

$182.78

Compare At:: $215.68
You Save:: $32.90

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ice Door Assembly

4.9 (366)

By: Ge

Part Number: WR17X11653

The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.

Symptoms of a bad Ice Door Assembly include:

Frost or ice buildup around the dispenser area
Ice escaping from the dispenser when not in use
Failure to dispense ice
Noise during operation indicating misalignment or malfunction

Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Door sweating
Frost buildup
Ice maker won't dispense ice
Freezer not defrosting

Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing Lawrence D. • Holly Springs , NC • March 21, 2016

My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Slide Asm Rh

4.9 (175)

By: Ge

Part Number: WR72X240

The Slide Assembly RH is an OEM replacement part for GE side-by-side refrigerators. As a replaceable sub-assembly, it restores smooth extension of plastic vegetable/multi-purpose slides on the right interior. The slide measures approximately 16 inches.

Symptoms of a bad slide assembly include:

Drawers failing to fully extend or retract inward
Difficulty using bins and storage sections
Noisy operation of problematic slides
Stress concentration leading to cracks along slides

Causes stem from extended use gradually degrading nylon rollers and wear strips through inevitable friction. Exposure to excessive weights above slide limits may also bend or warp steel support rails quicker.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

Do-It-Yourself Stories from Customers like You Broken drawer slides for refrigerator drawers William L. • Bainbridge Is. , WA • February 24, 2015

Although the web ordering process was clear, I needed some "personal contact" via customer service. It took very little time to assure me the the parts were the correct ones and the video was easy to follow. When the parts arrived in 2 business days, it took only 30 mins. to complete the replacement of the slides. The video was a great way to assure there was no wasted time or effort. Read more

$29.95

Compare At:: $35.34
You Save:: $5.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Evaporator Fan Motor

4.8 (83)

By: Ge

Part Number: WR60X10185

The Evaporator Fan Motor is an OEM part for GE refrigerators. It circulates air over the evaporator coils, ensuring consistent cooling throughout the refrigerator and freezer compartments. The motor operates 9.75 volts DC. The motor has a 1/8" shaft and a 12" long, 4-wire harness.

You should replace the evaporator fan motor if it becomes faulty due to wear and tear, electrical issues, or physical damage. Over time, the motor bearings can wear out, or the motor itself can fail due to continuous operation.

Symptoms of a bad evaporator fan motor include:

The refrigerator or freezer not cooling properly
Unusual noises coming from the freezer area
Frost buildup in the freezer
The refrigerator running continuously without reaching the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Noisy
Fridge too warm
Freezer section too warm

Do-It-Yourself Stories from Customers like You Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014

I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more

$85.69

Compare At:: $101.97
You Save:: $16.28

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Door Recess Spring

4.9 (193)

By: Ge

Part Number: WR02X10585

The Door Recess Spring is an OEM replacement part for GE side-by-side refrigerators. It sits within the icemaker door frame to control movement and allow smooth closing/opening of the access point.

Causes of a bad icemaker door recess spring include wear and tear of thin metal coils repeatedly compressing over many years of filling cycles. Exposure to humidity intrusions from melting ice accumulates oxidation shortening spring elasticity.

Symptoms of a bad icemaker door recess spring include:

Difficulty opening and shutting the icemaker access door securely
Excessive slamming noise caused by abrupt closing
Sagging or improper alignment of the door against the frame
Struggles retaining positioning of the transparent plastic doorway

This genuine GE replacement spring is compatible with Hotpoint, RCA and Kenmore models.

This part fixes the following symptoms

Door latch failure
Ice maker not making ice
Not dispensing water
Ice maker won't dispense ice

Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing Lawrence D. • Holly Springs , NC • March 21, 2016

$7.91

Compare At:: $8.69
You Save:: $0.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Condenser Fan Motor

4.9 (151)

By: Ge

Part Number: WR60X10220

The Condenser Fan Motor is an OEM part for GE refrigerators. This motor is vital for the efficient operation of the refrigerator, as it powers the fan that cools the condenser coils and helps to circulate air. Without a properly functioning condenser fan motor, the refrigerator can overheat, leading to poor cooling performance and increased energy consumption.

Symptoms of a failing Condenser Fan Motor include:

The refrigerator making unusual noises such as humming or buzzing
The back of the refrigerator feeling hotter than usual
The refrigerator cycling on and off more frequently
Food not being kept at the proper temperature

Common causes for a bad condenser fan motor include dust and debris buildup obstructing the motor, age-related wear, and electrical failures such as short circuits or burnt-out capacitors. Regular cleaning and maintenance can help prolong the life of the motor, but if these symptoms occur, a replacement may be necessary.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This is a 115-volt AC fan motor. For the 12-volt DC fan motor, order part number WR60X10209. Right-hand thread. The compatible fan blade is part number WR60X10207.

This part fixes the following symptoms

Fridge runs too long

Do-It-Yourself Stories from Customers like You Condensor fan motor went bad Richard N. • Kidder , MO • December 15, 2015

First, cleaned all the dirt and lint from the condenser radiator, the fan motor is in a metal housing holding the fan motor in place. look carefully and there is a sheet metal screw at the bottom of the housing, 1/4 inch screw head sheet metal screw. I removed the screw and that released the housing from the base of frig. then very carefully , I turn the housing with the fan motor still in the housing a worked out of the frig base where it would be easier to replace the bad motor. the... Read more

$44.60

Compare At:: $53.07
You Save:: $8.47

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Run Capacitor

4.9 (61)

By: Ge

Part Number: WR55X24064

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.

Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.

Symptoms of a bad Run Capacitor include:

The refrigerator compressor fails to start.
Unusual humming noises coming from the refrigerator.
The refrigerator cycles on and off more frequently than normal.
A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015

We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from... Read more

$50.95

Compare At:: $60.12
You Save:: $9.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dispenser Lever

4.9 (140)

By: Ge

Part Number: WR17X11267

The Dispenser Lever is an OEM part for GE refrigerators. It is located on the front panel of the refrigerator and is responsible for activating the dispenser mechanism. When pressed, it engages the internal mechanisms to dispense ice or water into a glass or container.

Causes of a faulty dispenser lever can include regular wear and tear, physical damage, or misalignment. These factors can result in issues such as the lever not engaging or sticking, difficulty in dispensing ice or water, or improper alignment with the dispenser mechanisms.

Symptoms of a bad dispenser lever may include:

Inability to dispense ice or water when the lever is pressed
Sticking or jamming of the lever
Misalignment with the dispenser mechanisms

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Broken lever on the ice dispenser funnel Donald B. • Warrensburg , MO • August 18, 2014

I had started to order the part from GE at $34.95 + shipping when I did a search and found AppliancePartsPros.com. I was able to get the same part for half of the price of GE. I placed the order and actually to my surprise received the part the very next day. I watched the video provided on-line to see how to replace the part. It took me about 10 minutes and everything is working well. Beats paying a repairman to come out on their schedule and do the same thing at, I am sure, a much higher... Read more

$35.23

Compare At:: $41.92
You Save:: $6.69

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Defrost Heater Kit

4.9 (138)

By: Ge

Part Number: WR51X10101

The Defrost Heater Kit is an OEM part for GE refrigerators. It is designed to prevent frost and ice buildup within the freezer compartment by heating up at regular intervals to melt away any accumulated frost. For 12-inch glass tube heater use WR51X10055.

Symptoms of a bad Defrost Heater Kit include:

Buildup of frost or ice on the freezer walls or around the evaporator coils.
The refrigerator or freezer section becoming too warm due to blocked air vents by ice.
Frequent cycling or longer running times of the refrigerator compressor.

Causes of a bad defrost heater can include failure of the heating element due to wear or a burnt-out component, malfunctioning sensors that regulate the defrost cycle, or electrical issues preventing the heater from activating.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Freezer too cold
Fridge too cold
Too warm
Freezer section too warm

Do-It-Yourself Stories from Customers like You Freezer and refrigerator not cold enough Jennifer M. • Ny , NY • July 10, 2018

Yes, a 49-yr old woman fixed this fridge all by herself! AppliancePartsPros was very helpful in the diagnosis of the problem, which I determined to likely be the result of defrost failure. There was a large amount of ice and frost coating the back of the freezer despite the inside temp being 42 degrees. My husband thought I was crazy to think it was a problem with ice when the temperature was warm, but I told him to trust me and I would attempt the repair. He just wanted to throw the old one... Read more

$55.44

Compare At:: $65.97
You Save:: $10.53

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dispenser Switch

4.9 (23)

By: Ge

Part Number: WR23X10783

The Dispenser Switch is an OEM replacement part for GE refrigerators. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use.

Over time, the dispenser switch can wear out or become damaged due to frequent use, exposure to moisture, or electrical issues. This can result in the switch failing to activate the dispenser properly, impacting the performance of the refrigerator's dispensing system.

Symptoms of a bad dispenser switch include:

The water or ice dispenser not responding when the lever or button is pressed
Intermittent or inconsistent dispensing of water or ice
The dispenser working only occasionally or requiring excessive pressure to activate
No audible click or feedback when pressing the dispenser lever or button

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Bad water dispenser micro switch on my ge fridge James G. • Melbourne , FL • November 23, 2014

After disconnecting power to the fridge, I first removed the ice maker/water dispenser/fridge control faceplate. This easily popped out using a flat head screw driver. Then disconnected the 3 wire harness connections to the control board. I next removed the plastic dispenser housing shield. There's only 4 screws that hold this on. Finally, I removed the Micro-switch, disconnected the two wire connectors and installed the replacement switch and reinstalled everything. The repair took only... Read more

$49.95

Compare At:: $59.44
You Save:: $9.49

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dispenser Door Recess Crank

4.9 (95)

By: Ge

Part Number: WR17X10706

The Dispenser Door Recess Crank is an OEM part for GE refrigerators. This crank is a crucial component of the refrigerator's ice and water dispenser system, helping to operate the dispenser door by opening and closing it when activated. It ensures that ice or water is dispensed efficiently and prevents unwanted air from entering the freezer compartment.

You should replace the dispenser door recess crank if it becomes faulty or damaged. Causes of a bad crank can include wear and tear from frequent use, accidental damage, or mechanical failure. A malfunctioning crank can lead to issues with the dispenser door's operation.

Symptoms of a bad dispenser door recess crank include:

The dispenser door not opening or closing properly
Ice or water not dispensing correctly
Unusual noises during the dispensing process
The dispenser door staying open or not sealing properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ice flapper door stopped closing Lawrence D. • Holly Springs , NC • March 21, 2016

$7.37

Compare At:: $8.36
You Save:: $0.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ice Dispenser Crusher Cover

4.9 (132)

By: Ge

Part Number: WR17X11497

The Ice Dispenser Crusher Cover is an OEM part for GE refrigerators. This component is crucial for the ice dispensing mechanism, covering the ice crusher blades and ensuring safe and efficient operation when dispensing crushed ice.

Causes of a bad ice dispenser crusher cover can include regular wear and tear, damage from ice buildup, or cracks and breaks due to impact or mishandling. Over time, these issues can compromise the functionality of the ice dispenser, leading to ineffective ice crushing or potential safety hazards.

Symptoms of a bad Ice Dispenser Crusher Cover include:

Inconsistent ice crushing
Ice dispenser jams or blockages
Visible cracks or breaks in the cover
Unusual noises during ice dispensing

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Ice maker dispenses too much ice

Do-It-Yourself Stories from Customers like You Ice bucket auger fins broke off on gegse22ethc ww side by side frig. Ron N. • Kearney , NE • August 28, 2023

First - I am not a handyman so bear with me. Turned out not only the auger fins were broken off but also the ice dispenser crusher cover had cracks and breaks on it. First - AppliancePartsPros.com has awesome shipping. Because i didn't know right away the crusher cover was broken, I had to do two orders. Each order was received next day in afternoon. Video is great. Tells exactly how to do. There are two issues you will run into. Remembering the exact sequence of all the washers and... Read more

$27.95

Compare At:: $33.54
You Save:: $5.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Fill Tube & Grommet Assembly

4.9 (55)

By: Ge

Part Number: WR17X11168

The Fill Tube & Grommet Assembly is an OEM part for GE refrigerators. This part ensures that water is efficiently and accurately delivered to the ice maker, where it's frozen into ice.

Causes of a bad Fill Tube & Grommet Assembly can include freezing within the tube, which blocks water flow, physical damage or wear that creates leaks, and deterioration of the grommet, leading to improper sealing and potential water damage.

Symptoms of a bad Fill Tube & Grommet Assembly include:

Ice maker not producing ice due to lack of water supply
Water leaking inside the freezer compartment
Frost or ice formation on the back of the appliance due to leaking water
Unusual noises as the refrigerator attempts to fill the ice maker

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Leaking
Ice maker not making ice

Do-It-Yourself Stories from Customers like You Leaking ice maker fill tube & broken freezer light shield Frances H. • Jupiter , FL • January 26, 2016

I made the right initial move - I went to appliancepartspros.com and located the necessary parts. A video convinced me I could make the repairs myself. The correct parts were easily ordered and arrived quickly. I had no problem installing the parts using the knowledge I gained from the appliancepartspros.com video and the leak was fixed. Read more

$22.95

Compare At:: $27.40
You Save:: $4.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Slide Asm Rh

4.9 (53)

By: Ge

Part Number: WR72X242

The Slide Assembly RH is an OEM part for GE refrigerators. This slide assembly is designed to support and guide the refrigerator's drawers, ensuring smooth opening and closing. The slide measures approximately 10 inches x 1 3/8 inch x 1 5/16 inch. This is the right-hand side. For the left-hand side order WR72X241. For the slide bearing order WR1X2048.

Over time, the slide assembly can become worn out or damaged. Causes of a bad slide assembly can include frequent use, physical damage from overloading the drawers, or wear and tear on the sliding mechanism.

Symptoms of a bad Slide Assembly RH include:

Difficulty opening or closing the refrigerator drawers
Drawers not sliding smoothly or getting stuck
Unusual noises when moving the drawers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken drawer slides for refrigerator drawers William L. • Bainbridge Is. , WA • February 24, 2015

$51.68

Compare At:: $61.50
You Save:: $9.82

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Compression Ring

4.8 (40)

By: Ge

Part Number: WR02X12149

The Compression Ring is an OEM part for GE refrigerators. It is designed to secure and seal connections within the refrigerator’s water and ice dispensing system, ensuring a leak-free operation. This small yet vital component helps maintain the integrity of the connections, preventing water leaks and ensuring the proper flow of water through the dispenser and ice maker.

Over time, the compression ring can wear out or become damaged due to regular use and the natural aging of materials. If the compression ring is compromised, it can lead to water leaks or poor water flow, which can affect the overall performance of the refrigerator’s water and ice dispensing functions.

Symptoms of a bad compression ring include:

Water leaks around the dispenser or ice maker
Reduced water flow or no water flow at all
Drips or puddles forming inside the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Fridge too warm

Do-It-Yourself Stories from Customers like You Evaporator fan started making loud noise from blade hitting shroud Kerry M. • Englewood , CO • October 03, 2016

Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Gss20gewp Parts

Temperature Sensor

Electromechanical Icemaker Kit

Ice Door Assembly

Slide Asm Rh

Evaporator Fan Motor

Door Recess Spring

Condenser Fan Motor

Run Capacitor

Dispenser Lever

Defrost Heater Kit

Dispenser Switch

Dispenser Door Recess Crank

Ice Dispenser Crusher Cover

Fill Tube & Grommet Assembly

Slide Asm Rh

Compression Ring