Lg Circuit Breaker Wok Parts

The Sensor Assembly is an OEM part for LG washing machines. This component is crucial for detecting and monitoring various conditions within the washing machine, such as water level, temperature, and load balance. It ensures the machine operates efficiently and effectively by providing accurate data to the control board.

Causes of a bad sensor assembly can include wear and tear from regular use, exposure to water and detergents, electrical malfunctions, or damage from impact. A faulty sensor assembly can lead to incorrect readings, which can affect the washing machine’s performance and lead to issues such as improper water levels or unbalanced loads.

Symptoms of a bad Sensor Assembly include:

• Incorrect water levels during cycles
• The washing machine stopping mid-cycle or not completing cycles
• Error codes related to water level or load balance
• The machine failing to start or operate correctly

This OEM LG part is also compatible with Sears/Kenmore models.

The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.

Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.

Symptoms of a bad magnetron thermostat may include:

• Microwave not heating food evenly or at all
• Inconsistent or weak heating performance
• Microwave shutting off or displaying error codes related to temperature issues

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Thermistor Assembly is an OEM component specifically designed for front loading LG washing machines. It plays an important role in monitoring and regulating temperatures during heated wash cycles. The thermistor detects temperature changes within the wash drum and sends this information to the control board to ensure clothes are washed at the optimal temperature.

Causes of a bad thermistor assembly can include general wear and tear over time, exposure to extreme temperatures, or damage due to impact or mishandling during cycles.

Symptoms of a bad thermistor assembly include:

• Inability to reach or maintain set temperatures
• Fluctuating water temperatures
• Error codes related to temperature sensing

This OEM LG part is also compatible with Sears/Kenmore washers.

The Rotor Position Sensor is an OEM part for LG washing machines. This sensor monitors the speed and direction that the washing machine tub is spinning. It ensures the tub rotates properly in both clockwise and counterclockwise motions during cycles.

Causes of a bad rotor position sensor can include wear and tear from extended use agitating heavy loads, breakage from impact or moisture damage, or compromised wiring over time.

Symptoms of a bad rotor position sensor include:

• Tub failing to spin or agitate clothes during cycles
• Inability to detect spin cycle direction changes
• Repeated errors messages related to tub operation
• Long cycle times as the sensor cannot monitor load movement

This OEM LG part is also compatible with some Kenmore models.

The Thermostat is an OEM part for LG wall ovens. It is a temperature-sensitive cut-off switch located near the oven's heating elements that monitors interior temperatures and prevents overheating within the appliance.

Causes of a bad safety thermostat can be related to prolonged exposure to excessive heat inside the oven cavity, defects in the thermostat's microchip or coil components, or damage from corrosion or physical impact over time.

Symptoms of a failed hi-limit thermostat include:

• The oven's main thermostat clicking repeatedly but no temperature rise inside the cavity
• Unexpected shutdowns of the oven during heating cycles
• Smoking or burning smells coming from the oven area
• Tripped circuit breakers obstructing normal oven operation

This OEM LG part is also compatible with some Kenmore models.

This wire harness routes power and signals between the washer's control and multiple components. Replace a damaged harness to restore dependable operation when wiring is cut, brittle, or connectors are heat-damaged or corroded.

• Distributes electrical power and communication between the control board and components such as the motor, pump, valves, door lock, and sensors
• Maintains safe, reliable connections when insulation and terminals are intact
• Typical failure signs: intermittent operation, no start, specific loads not working (pump/motor/valves), or error codes traced to wiring faults
• Visible damage like chafed wires, broken connector locks, or burned/corroded terminals indicates replacement

• Disconnect power and turn off water supply before servicing; wear cut-resistant gloves
• Photograph and label connectors; move one plug at a time from old to new to avoid miswiring
• Route along original clips, channels, and grommets; keep wiring clear of sharp edges and moving parts
• Ensure all connectors are fully seated; test operation before final reassembly

This NTC thermistor is a refrigerator temperature sensor that monitors cooling system temperature and helps the control board maintain proper operation. It replaces a failed sensor to restore accurate temperature sensing and reliable cycle control. What it does:

• Measures internal temperature and sends a changing resistance signal to the control board
• Helps the fridge adjust compressor/fan cycles for stable cooling
• Common symptom fix: erratic or incorrect temperatures, frequent cycling, or temperature-related error codes
• Works as the sensor used in evaporator/air temperature sensing circuits (model-dependent)

• One NTC thermistor sensor (wiring and connector as shown)

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or stretching the lead wires
• Mount and route the sensor per the unit's service diagram so it contacts the intended location
• Verify sensor response with a multimeter (NTC resistance should change with temperature) or follow the manufacturer's service procedure

This Thermostat Assembly monitors and regulates internal temperature within the appliance's heating circuit. Replacing a failed thermostat restores proper heat control, helps prevent overheating, and can resolve common heating performance issues so cycles run correctly. What it does

• Senses internal temperature and opens/closes the heater circuit to maintain proper heat
• Provides over-temperature protection by cutting power at unsafe temperatures
• Helps ensure consistent heating performance throughout the cycle
• Helps with symptoms such as no heat, overheating/shutting off, or unusually long cycle times

• 1 thermostat assembly

• Disconnect power before servicing; allow hot components to cool
• Access the thermostat location (varies by model); note wire positions before removal
• Mount flush to the surface for accurate sensing; transfer original hardware if required
• After installation, test operation; use a multimeter for continuity checks if needed

This time delay fuse protects the appliance from overheating by opening the circuit when temperatures exceed safe limits. It's a direct-replacement electrical safety fuse used in heating circuits to help prevent damage and fire risk. What it does:

• Opens the circuit when the detected temperature rises above safe operating limits to stop the heating element
• Helps prevent overheating-related damage to internal components and wiring
• Can cause intermittent or no heating when failed
• Commonly associated with symptoms such as no heat, reduced or inconsistent heating, or a unit that stops running during heating cycles

• Disconnect power to the appliance before accessing or replacing the fuse to avoid electrical shock
• Locate the fuse according to your appliance's service manual or diagram and replace with the exact part number
• If the fuse is blown, inspect heating element, thermostat/thermal cutouts, and venting for underlying faults before reinstalling