Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.
Searched the internet and found that the culprit could be 3 different parts. Ordered them and fixed the issue by replacing the thermostat! Read more
Range won't power on after self-cleaning cycle? This high temperature thermostat often fails during cleaning, cutting power and locking the door. Easy 1-minute fix.
Did some Google searches and most comments concerning this issue on LG stoves indicated the high temperature thermostat malfunctions when using the self cleaning function. This malfunction causes complete loss of power for the entire stove and locks the oven door. Since I wasn't completely sure if it was the thermostat or where it was for that matter, I called a service tech to troubleshoot the stove. He was able to determine it was the thermostat and further tested his findings by... Read more
Fix F9 error codes, oven overheating, or elements not heating with this range oven control board. Controls temperature and heating elements. DIY repair.
We ordered the Pwb(pcb) Assembly,sub, Part Number 6871W1N012B & received the part the next day. I couldn't believe how fast. My husband was able to replace in 15 minutes. My oven worked again! Read more
If your oven won't heat or takes too long to reach temperature, the bake element may be burned out. Easy 20-minute DIY repair for most LG ranges.
Pulled up you tube, watched video, ordered part, and installed. No problems Read more
Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.
Ordered replacement parts and were better than the OEM that was on the range. Read more
Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.
Tested switch with a jumper. Confirmed the switch was bad. Ordered new switch, less than a minute installation.good to go Read more
Burner not heating or won't turn off? This radiant surface element sits beneath the glass cooktop and restores fast, even heating. DIY-friendly repair.
Replaced with new Lg part as per advice from parts/tech (Applianceparts pros) after ordered & received, removed/installed it, it works great now. Thanks a lots, guys, great works! Read more
Burner won't heat or heats inconsistently? This radiant surface element mounts under the glass cooktop. DIY-friendly repair, typically 45 minutes.
It was very easy to find the part we needed, I put the model number in and it showed all the parts. Picked the broken buner, ordered it and was amazed, it came the next day. The directions were on the back of our stove. Simply followed what it said to do. Replaced burner, put it back together. Works perfectly. Wish we would of fixed it sooner. Saved having to have a service call. Read more
Fix a burner that won't heat on your range cooktop. This radiant surface element is the largest burner and supplies heat for cooking food.
Had to buy repair manual after that it went well Read more
Replace missing or stripped taptite screws that secure panels and internal components. This thread-forming screw creates a tight hold to eliminate rattles.
Fix unresponsive controls, burners not working, or F1 error codes with this range sub circuit board. Moderately difficult DIY repair with small clips.
This job was easy really only need a screwdriver to complete. After installing the board I found that some of the connectors on the board were upside down, so I pulled the board back out to compare with the old one. After comparing the boards some connectors were upside down but I noticed that the components on the board were also flipped as they were numbered the same. I installed the new board again and flipped the 3 cables and put everything back together. New board works great so far. Read more
Fix a wall oven with no display or unresponsive controls. This power transformer supplies low voltage to the control board, restoring reliable operation.
Factory mounting screw secures brackets, covers, and internal assemblies in your range. Replaces missing, stripped, or damaged fasteners for proper fit.
Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.
Truss head tapping screw secures trim, panels, and assemblies on dryers. Replace if screw is stripped, missing, or damaged during appliance repair.
Secures interior panels and components. Replace when stripped, corroded, or missing to stop rattles and secure loose trim. Verify fit with your model number.