Mvwb85owq1 Parts

The Valve is an OEM part for Whirlpool washing machines. This component controls the flow of water into the washing machine during the fill cycle, ensuring that the proper amount of water enters the machine based on the selected settings. The valve is crucial for regulating water levels and maintaining the efficiency and effectiveness of the washing process.

You should replace the valve if it becomes faulty or malfunctions. Causes of a bad valve can include regular wear and tear from frequent use, mineral buildup from hard water, or damage from electrical issues or surges. These problems can lead to the valve not opening or closing properly, which affects the machine's ability to fill with water.

Symptoms of a bad valve include:

• Washing machine not filling with water or filling slowly
• Washer overfilling or water leaking from the machine
• Inconsistent water levels during wash cycles
• Strange noises during the fill cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Gearcase is an OEM part for Whirlpool washing machines. This component, also known as the transmission, is responsible for converting the motor's power into the mechanical action needed to agitate and spin the washer drum. It plays a crucial role in the overall operation and efficiency of the washing machine.

Over time, the gearcase can become worn or damaged due to heavy loads, continuous use, or lack of maintenance. A faulty gearcase can severely impact the washer’s performance and may require replacement to restore proper functionality.

Symptoms of a bad gearcase include:

• The washer not agitating or spinning
• Loud noises or grinding sounds during operation
• The washer leaking oil
• The drum not turning smoothly or at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bearing and Tub Seal Kit is an OEM part for Whirlpool washing machines. It includes high-quality bearings and a tub seal designed to ensure smooth operation and prevent water leaks. The bearings allow the tub to spin freely and quietly, while the seal protects the bearings from water and detergent, extending their life and the overall efficiency of the washing machine.

Causes of failure for these components can vary but often include water infiltration that leads to rust and deterioration of the bearings, or wear and tear from heavy or unbalanced loads that put additional stress on the seal and bearings. 

Symptoms of a bad bearing and tub seal kit include:

• Noisy operation, especially during the spin cycle
• Water leaking from the bottom of the washer
• The washing machine tub struggling to spin or not spinning at all

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Washer Basket Hub is an OEM part for Whirlpool washing machines. It is designed to connect the washer basket to the drive shaft, enabling the basket to spin during the wash and spin cycles. This component ensures that the basket rotates smoothly and efficiently, contributing to the overall performance and functionality of the washing machine.

You should replace the washer basket hub if it becomes worn out or damaged. Causes of a bad basket hub can include regular wear and tear from frequent use, corrosion due to water exposure, or damage from overloading the washer. A faulty basket hub can impair the spinning action, leading to inefficient washing and rinsing.

Symptoms of a bad washer basket hub include:

• The washer basket not spinning or agitating properly
• Loud noises such as grinding or clunking during spin cycles
• The washer failing to complete cycles or properly clean clothes
• The basket being loose or wobbling during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM part for Whirlpool washing machines. This screw is used to securely attach the wash plate or agitator to the bottom of the washer's drum. This screw ensures that the wash plate remains firmly in place during the washer's operation, preventing movement that could lead to inefficient washing or damage to the machine.

Causes of damage to the screw can include corrosion over time, overloading of the washing machine which puts excess stress on the wash plate, or wear and tear from regular use. 

Symptoms of a bad Screw include:

• The wash plate becoming loose or detached
• Unusual noises during the wash cycle, such as rattling or banging
• The washer failing to agitate properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Latch is an OEM part for Whirlpool dishwashers. It is essential for securing the dishwasher door during operation, ensuring that the door stays closed and the dishwasher can run its cycles effectively. The latch mechanism also engages the door switch, which signals the dishwasher to start its cycle.

Over time, latches can wear out or become damaged due to repeated use, exposure to moisture, or accidental force. A malfunctioning latch can prevent the dishwasher from starting or lead to leaks during operation.

Symptoms of a bad Latch include:

• Dishwasher door not staying closed
• Dishwasher not starting
• Leaks around the door during a wash cycle
• The door latch feeling loose or not engaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This lock has a White bezel. For the Grey bezel, order W10861642.

The Clutch is an OEM part for Whirlpool washing machines. It is crucial for the proper functioning of the washer's spin cycle, connecting the transmission to the inner tub and facilitating the movement needed for spinning and agitating. The clutch ensures that the tub reaches the appropriate spin speed, thereby effectively removing water from clothes.

Causes of a bad clutch can include wear and tear from regular use, overloading the washing machine, or damage due to an imbalance during the spin cycle. When the clutch becomes faulty, the washing machine may struggle to spin or agitate correctly, affecting the overall efficiency of the appliance.

Symptoms of a bad clutch include:

• The washer not spinning or agitating properly
• Excessive noise during the spin cycle
• Wet clothes at the end of the cycle
• The washer stopping mid-cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed.

What it does

• Pumps water from the tub to the household drain during the drain cycle
• Helps resolve standing water, slow draining, or humming from a seized pump
• Reduces long/aborted cycles caused by incomplete draining
• Can stop leaks at the pump body when the housing is cracked

What’s included
One drain pump assembly.

Install notes

• Unplug power and turn off water; bail out remaining water before service
• Clamp/remove hoses and keep towels handy; transfer any mounting bracket as needed
• Inspect and clear the drain hose and tub-to-pump hose before reassembly
• Run a drain/spin test to verify proper flow and check for leaks

This OEM drain pump is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Clutch is an OEM part for Whirlpool washing machines. It engages the transmission that drives the wash basket's rotation during agitation and spinning cycles. Without a functioning clutch, the washer cannot transition effectively between wash and rinse operations. The clutch measures 4-7/8 inches in diameter

Causes of a bad clutch can include wear from repetitive use over many years or damage to the clutch coil that triggers engagement. Parts may have weakened to a point where they no longer make full contact needed for proper shifting.

Symptoms of a bad clutch include:

• The washer basket not spinning or turning at all
• Agitation but no transition to spin or vice versa
• Loud grinding noises coming from the transmission area

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Drain Pump is an OEM part for Whirlpool washing machines. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely.

Symptoms of a failing drain pump include:

• Water not draining out of the washing machine, leading to stagnant water pooled inside the tub
• Unusual noises, such as buzzing or humming, indicating that the pump motor is struggling
• The washing machine stopping mid-cycle due to inability to drain

Causes of drain pump failure typically include obstruction by foreign objects like coins or socks, motor burnout, or impeller damage. Regular maintenance, such as checking for debris in the pump's filter, can help prevent these issues.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool top load washer washplate is an OEM replacement part responsible for creating the agitation motion that helps to clean the laundry. The washplate is located in the bottom of the washer drum and is designed with fins or ridges that move the clothes in a back-and-forth motion during the wash cycle. It assists in distributing water and detergent evenly throughout the load, ensuring effective cleaning.

The Whirlpool washplate can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms:

• Clothes not being properly agitated or tangled during the wash cycle
• Incomplete cleaning of the laundry, with stains or residue remaining on the clothes after a cycle
• Excessive noise or rattling coming from the washplate during operation
• Physical damage or visible wear on the washplate, such as broken fins or a loose connection to the drum

The Washer is an OEM part for Whirlpool washing machines. It is a critical component that secures the agitator shaft or impeller to the transmission, allowing for the proper rotation and movement during the wash cycles.

Causes of a bad washer include general wear and tear, physical damage from impact or excessive force, or issues with the transmission or related components.

Symptoms of a faulty washer:

• Loud grinding or squeaking noises during operation
• The agitator or impeller not spinning or rotating properly
• Excessive vibration or shaking during wash cycles
• Potential leaks or damage to the tub due to improper rotation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

The Lid Hinge is an OEM part for Whirlpool washing machines. It connects the lid to the washing machine body, allowing the lid to open and close smoothly. This hinge ensures the lid remains securely attached while providing the necessary movement for easy access to the washer drum.

Common causes of a bad lid hinge include repeated use over time, accidental impact, or corrosion from exposure to moisture. These factors can cause the hinge to become loose, stiff, or broken.

Symptoms of a bad Lid Hinge include:

• Difficulty opening or closing the lid
• The lid not staying open or falling shut unexpectedly
• Unusual noises when moving the lid
• Visible damage or rust on the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid Lock Assembly is an OEM part for Whirlpool washing machines. It ensures the washer lid is securely locked during operation, preventing it from being opened mid-cycle and ensuring safe and efficient washing.

Causes of a bad lid lock assembly can include wear and tear from frequent use, electrical issues such as short circuits, and physical damage from impact or mishandling. A malfunctioning lid lock can disrupt the washing cycle, leading to incomplete washes or safety concerns.

Symptoms of a bad lid lock assembly include:

• The washer not starting or stopping mid-cycle
• Error codes indicating a lid lock issue
• The lid not locking or unlocking properly
• The washer lid feeling loose or failing to stay closed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hinge is an OEM part for Whirlpool washing machines. This component is essential for the proper function of the washing machine door, allowing it to open and close smoothly. The hinge ensures that the door stays aligned and securely closed during the wash cycle, preventing leaks and maintaining the safety of the machine's operation.

Causes of a bad hinge can include repeated use over time, accidental force or impact, or corrosion from exposure to moisture.

Symptoms of a bad hinge include:

• Difficulty opening or closing the washing machine door
• A door that does not stay closed properly
• Unusual noises when the door is moved
• Visible damage or misalignment of the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.