Cae15sr10 Parts

This electronic control board is the appliance's main PCB that manages functions and the user interface. Replacing a failed board can restore normal operation when the unit is unresponsive, erratic, or displaying control-related errors.

• Directs operation of key components based on user settings and sensor feedback
• Powers and communicates with the display/interface and control pads
• Coordinates timing through relays and interfaces with safety/protection circuits
• Common symptoms: no response to buttons, dead/blank display, unexpected cycling or beeping, control error codes, or visible damage on the old board

• Disconnect power before servicing and verify no voltage is present
• Use ESD precautions; handle the PCB by the edges and avoid flexing it
• Photograph/label connectors; transfer each to the same location on the new board, matching any jumpers or DIP-switch settings if present
• After installation, restore power and run the model's test/diagnostic or a cycle to confirm proper operation

This replacement power cord restores AC power to compatible refrigerators by replacing a damaged or worn supply lead. It provides a direct, safe power connection so the appliance can run reliably. What it does:

• Replaces a frayed, cut, or otherwise damaged power supply cord
• Restores consistent power when the appliance will not turn on or has intermittent power
• Maintains the appliance's grounding connection for safe operation
• Prevents electrical arcing from exposed wiring or compromised insulation

• One replacement power cord

• Disconnect the appliance from the power source before inspecting or replacing the cord
• Install with the proper strain relief and secure fasteners to prevent pinching or pull-out

This electronic PC board controls key appliance functions and user interface signals so the unit responds correctly to button presses and cycles. Replacing a failed board restores electronic control without replacing other modules. What it does:

• Receives input from the control panel and sends commands to motors, valves, heaters, and lights
• Manages timing and sequence for cycles and electronic features
• Can cause symptoms like an unresponsive control panel, blank or erratic display, or failure to start cycles
• Helps resolve intermittent operation or loss of specific electronic functions when board failure is the confirmed cause

• One electronic PC board

• Disconnect power (unplug or trip circuit breaker) before starting work
• Handle the board by edges and avoid static discharge—use an ESD strap if available
• Verify connector orientation and seating; ensure all harnesses are fully engaged before testing
• Test appliance operation after installation; if other symptoms persist, further diagnostics may be required

This electronic control board manages the oven/range control functions and user interface, restoring normal display, key/button response, and timed cooking operations when the original board fails. Replaces a damaged or nonresponsive console control module. What it does:

• Controls the range/oven user interface, display, and timed/automatic cooking functions
• Can cause blank display, unresponsive touchpads/buttons, or failed cycle starts when faulty
• Regulates input from controls to the appliance's relays and heating elements
• Helps restore normal electronic control and timed operation when replaced

• Disconnect power to the appliance before service to avoid shock or damage
• Use proper ESD precautions when handling the board; avoid touching components or contacts
• Remove the console or access panel per the appliance service instructions to reach the board
• Keep screws and connectors organized; verify all wire connectors are fully seated before power-up

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation

This replacement air filter screens airborne particles before they enter the appliance. Installing a clean, intact filter helps maintain proper airflow and protect internal components so the unit can operate as designed. What it does:

• Traps dust and lint before they reach the fan and internal parts
• Helps maintain smooth, unobstructed airflow
• A clogged or torn filter can cause weak airflow or unusual noise
• Replace when the filter is missing, damaged, or will not stay seated

• 1 air filter

• Disconnect power before servicing
• Open the filter access or grille and remove the old filter
• Insert the new filter in the same orientation; ensure tabs/slots fully engage
• Do not operate the appliance without a filter installed

This temperature sensor (thermistor) monitors fresh food/freezer temperatures and sends readings to the refrigerator control board so the appliance maintains consistent cooling. Replaces a failed or intermittent sensor to restore accurate temperature control. What it does:

• Senses interior temperature and reports it to the control board
• Helps the compressor, fans and defrost system run at the correct times
• Common symptom: fridge or freezer temperatures are too warm or fluctuate
• Common symptom: unit runs constantly or cycles erratically
• Common symptom: inconsistent cooling between compartments

• One temperature sensor (thermistor)

• Disconnect power to the appliance before attempting any repairs
• Handle the sensor and wiring gently; avoid kinking or stretching the lead
• Verify connector pins align and seat fully; some models use a simple plug-in connector

This blower wheel spins inside the dryer to move heated air through the drum and vent, restoring proper airflow for faster, more even drying. Replacing a worn or damaged wheel helps reduce overheating and drying time. What it does:

• Drives airflow from the heater and drum to the exhaust vent for effective drying
• Restores airflow if a cracked, warped, or broken wheel causes weak air movement
• Helps stop rubbing or scraping noises caused by a damaged wheel
• Reduces the risk of overheating when airflow is restricted

• Disconnect power (unplug electric or switch off gas supply and unplug) before starting any repair
• Access typically requires removing the dryer front or rear panel and the drum; follow your model's service manual
• Inspect shaft, motor coupling, and mounting hardware; replace worn fasteners or bearings as needed
• Ensure correct alignment and secure fastening during reassembly

A replacement motor start/run capacitor that helps the refrigerator's compressor and fan motors start and run more reliably. Restores proper motor operation when the original capacitor has failed or weakened. What it does:

• Provides the boost of electrical charge motors need to start and maintain proper running speed
• Commonly linked to symptoms such as a humming compressor, motors that won't start, or intermittent cooling
• Helps stabilize motor performance and reduce hard-starting that can strain components
• Used in refrigeration motor circuits that require a start/run capacitor

• One motor start/run capacitor

• Disconnect power to the appliance before beginning any service
• Capacitors can hold a charge—discharge safely
• Inspect mounting and wiring; replace using the same terminal connections and secure mounting