Parts for Maytag MFT2772HEZ02: Shelf Parts

This front pan is the exterior face for the pantry/drawer area. It restores the drawer's appearance and helps the drawer seat properly for normal operation and food storage. What it does:

• Replaces a cracked, warped, or damaged pantry/drawer front that affects appearance
• Helps the drawer align and engage with the track for smooth opening and closing
• Restores a proper seal/fit at the front of the pantry area to reduce rattling and movement
• Prevents items from catching on a broken front when loading or unloading the drawer

• Designed for direct replacement; verify fit with your model before installing
• Remove power to the appliance and empty the drawer before starting
• Use care when removing trim clips or fasteners to avoid damage to adjacent parts
• If fasteners or mounting clips are damaged, replace them with OEM-specified hardware

This crisper drawer roller guide mounts to the refrigerator shelf/frame and forms the track the drawer's roller rides in. Replacing a worn guide restores smooth, aligned drawer movement and helps prevent the crisper from sticking or coming off track.

• Guides and supports the crisper drawer roller to keep the drawer on its track
• Helps the drawer open and close smoothly and evenly
• Common symptoms of a failed guide: drawer sticks, tilts, wobbles, or pops off track
• Physical damage or wear to the guide can impede drawer travel

• Disconnect power and remove the crisper drawer and shelf/glass for access.
• Locate the damaged guide; release its locking tabs or remove the retaining screw(s).
• Align the new guide in the same orientation and secure it without overtightening.
• Reinstall the shelf and drawer; verify smooth drawer operation.

This top shelf assembly is the glass shelf used at the top of the refrigerator compartment to support food and containers, restoring stable, easy-to-organize storage and a finished interior appearance. What it does

• Provides a sturdy glass surface for storing food and beverages in the refrigerator.
• Replaces cracked, chipped or missing top shelf that causes instability or items to fall.
• Helps maintain proper airflow and organization when installed in the designated shelf slot.
• Matches OEM fit and form for direct replacement when the original shelf is damaged.

• Remove all items from the shelf area before installing to avoid spills or breakage.
• Handle glass carefully and wear gloves to protect hands from sharp edges.
• Slide the shelf into the designated rails or supports until fully seated; confirm it is level and secure before loading.
• Replace damaged components before use.

A replacement front pan that restores the appliance's front cabinet for a clean fit and protected internal components. Replaces a damaged or worn front panel to keep the appliance sealed and looking right. What it does:

• Covers and protects the appliance front, hiding internal components and mounting points
• Helps maintain proper cabinet alignment and fit of doors or control assemblies
• Reduces gaps that can let dust and lint into internal compartments
• Restores cosmetic appearance after dents, cracks, or heavy wear

• Disconnect power (and water if applicable) before starting any repair
• Basic hand tools typically required; follow factory service manual for steps
• Handle carefully—edges may be sharp and clips/tabs can break if forced
• Reuse or replace any associated fasteners or gaskets as needed for a proper fit

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

This glass crisper shelf provides a sturdy, flat surface for the refrigerator crisper area so fruits and vegetables are stored safely and organized. Replaces a cracked, chipped, or missing crisper shelf to restore usable storage space. What it does:

• Replaces the glass shelf that sits over the crisper drawer, supporting produce and other items
• Restores a smooth, even surface when the original shelf is cracked, chipped, or broken
• Helps prevent food from falling into the crisper compartment due to damaged glass
• Allows drawers and storage above the crisper to slide and sit properly when shelf is intact

• Handle with care; glass can break—wear gloves and eye protection during removal/installation
• Remove food and any loose components from the area before replacing the shelf
• Support the shelf while sliding it into position to avoid dropping or chipping
• Align it evenly and test drawer movement before restocking

Replace a cracked or missing crisper bin with this refrigerator crisper pan. It restores smooth drawer operation and keeps fruits and vegetables contained under the crisper cover so they stay organized and easy to access.

• Holds produce in the fresh food compartment and slides on the crisper tracks
• Works with the crisper cover/humidity control to help manage moisture around produce
• Replaces drawers that are cracked, chipped, warped, or missing
• Helps resolve issues like drawers that won't slide smoothly, fall off track, or won't close fully

• Unplug the refrigerator or disconnect power; remove food from the drawer
• Fully extend the drawer, lift the front to clear the stops, and pull straight out to remove
• Align the new pan on the rails and slide in until seated; do not force
• Avoid overloading the bin to prevent future damage

This is a replacement mounting plate that secures and supports internal components for proper alignment and stable operation. Restores structural support and helps maintain correct positioning of nearby parts. What it does:

• Provides a stable mounting surface for adjacent components to prevent movement or vibration
• Keeps parts aligned so mechanisms operate smoothly and reliably
• Replaces a damaged, bent, or corroded plate that can cause rattling or misalignment
• Helps maintain proper spacing to protect wiring and connectors from contact or wear

• Disconnect power before beginning any repair to avoid shock or injury
• Installation typically requires basic hand tools; handle edges carefully
• Inspect nearby fasteners, clips, and gaskets and replace if damaged

This is a replacement mounting plate that secures and supports components inside your appliance, restoring proper fit and alignment for safe, reliable operation. It helps maintain correct spacing and attachment where the original plate is worn or damaged. What it does:

• Provides structural support for attached components and panels
• Restores proper alignment to reduce vibration and rattling
• Replaces a cracked, bent, or corroded plate that no longer holds parts securely
• Helps prevent wear on fasteners and adjacent parts by keeping them correctly positioned

• One replacement mounting plate

• High-level replacement only; installation requires basic hand tools and removal of adjacent panels
• Follow manufacturer service instructions for disassembly and reassembly
• Disconnect power (and gas, if applicable) before servicing the appliance
• If fasteners or clips are missing or damaged, replace them with OEM-recommended hardware

This replacement support is a mounting bracket that helps secure and stabilize a major appliance assembly, restoring proper alignment and reducing vibration or movement. It fits into the OEM assembly to keep panels and components supported. What it does

• Holds and supports a panel or internal component to prevent sagging and misalignment
• Reduces rattling, vibration and contact-related noises caused by loose supports
• Restores proper alignment so doors, panels or assemblies sit and operate correctly
• Helps maintain safe, stable operation by keeping parts secured in their intended position

• Disconnect power and water (if applicable) before starting any repair
• Use basic hand tools; follow the OEM diagram for correct orientation and fastener locations
• Inspect adjoining parts (fasteners, clips, mounting points) and replace any that are worn

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This replacement plate secures internal components and helps restore proper alignment and stability in the appliance. Replacing a damaged or missing plate prevents loose parts and abnormal noises for safer, more reliable operation. What it does:

• Secures and supports nearby components to maintain correct positioning
• Prevents movement that can cause rattling, vibration, or contact with other parts
• Restores mounting points that may be bent, cracked, or worn
• Helps maintain proper alignment for associated assemblies

• Disconnect power (and water if applicable) before starting any repair
• Use basic hand tools; handle edges carefully to avoid cuts
• Inspect surrounding mounting hardware and replace any damaged fasteners
• Refer to your model-specific service manual or schematic for exact placement and torque specs

A small replacement screw used to secure appliance components and panels. This genuine-style fastener restores proper fit and function when original screws are missing, loose, or damaged. What it does:

• Secures panels, brackets, or small components in place
• Restores proper alignment and prevents rattling or movement
• Replaces stripped, corroded, or lost fasteners
• Works where the appliance design calls for this specific screw size and thread

• Use the matching driver size and apply firm, even pressure to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power or move appliance away from utilities when working near electrical or gas components
• Inspect and repair the threaded hole before installing the new screw

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

A small mounting screw used to secure appliance panels and components. This genuine replacement restores proper fit and reduces vibration or loose parts when a missing or stripped fastener causes fit issues. What it does:

• Secures panels, trim, or internal components to the appliance frame
• Helps stop rattling or movement caused by a missing or loose screw
• Restores correct alignment where a fastener is lost or damaged
• Works as a direct-fit replacement when the original screw is worn or stripped

• The screw shown/listed

• Disconnect power (and gas if applicable) before any repair
• Use the matching screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage
• Keep small parts away from children and store removed hardware for reference

The DRAWER GLIDE is an OEM component specifically designed for bottom-mount Whirlpool refrigerators. It facilitates smooth extension and retraction of refrigerator shelves and drawers.

These heavy-duty glides are engineered to silently and reliably operate over extended use. Proper functionality of the glides is necessary for accessible storage of items placed on shelves and in drawers. 

Causes of bad drawer glides can include worn roller bearings, broken plastic clips or guides, or accumulated debris that causes resistance.

Symptoms of a bad Drawer Glide include: 

• "Sticking" or binding when pulling shelves out
• Noisy or grinding sounds emanating from glide areas
• Difficulty fully extending shelves or drawers 

This part is also compatible with refrigerators from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and some Kenmore models.

This is the right-side crisper plate — the shelf panel that supports the crisper drawer and its contents, helping keep produce organized and stable inside the refrigerator. What it does:

• Provides a stable shelf surface for the right crisper/drawer area
• Supports the crisper drawer and helps keep items from falling into lower cavities
• Replaces cracked, chipped, warped or missing right crisper shelf panels
• Restores proper seating and alignment for the crisper drawer on the right side

• Handle carefully during install to avoid chipping or cracking; use gloves if needed
• Slide the crisper drawer out and set aside before positioning the replacement plate

This rail is a replacement oven rack support that helps guide and stabilize the oven rack for smooth in-and-out movement and correct rack alignment during cooking. It restores proper support when the original rail is bent or worn. What it does:

• Guides the oven rack so cookware slides in and out smoothly
• Keeps the rack properly aligned to prevent tipping or uneven cooking
• Replaces damaged or bent rails that cause rack instability
• Helps maintain safe, predictable rack movement during use

• One rail

• Disconnect power to the appliance before beginning any repair
• Remove oven racks and follow the OEM instructions for rail removal and installation
• Use proper tools and avoid forcing parts; inspect mounting points for damage

Replacement drum support roller that helps the dryer drum rotate smoothly and quietly. Installs where the drum rests to reduce noise and uneven rotation caused by worn or damaged rollers. What it does:

• Supports and guides the tumble/drum as it spins to maintain proper alignment.
• Reduces squeaks, rumbling, and scraping noises from worn or seized rollers.
• Prevents excessive belt wear and uneven drum movement that can lead to vibration.
• Restores smoother rotation when original rollers are cracked, worn, or binding.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Access the roller by removing the dryer access panel or drum per your model's service instructions; support the drum to prevent it from falling.
• Inspect adjacent parts (idler, rollers, shaft, and belt) and replace if worn to avoid repeated failures.