Parts for Whirlpool WRF757SDEE01: 08 - Shelf Parts

Replace a cracked or loose front on your refrigerator's full-width pantry/deli drawer. This pantry drawer front restores a secure handle and clean look so the drawer operates smoothly and keeps contents organized. What it does:

• Serves as the front panel and handle for the refrigerator's pantry/deli drawer
• Replaces broken, cracked, warped, or missing fronts
• Helps the drawer align, slide, and close properly
• Common symptoms: loose or missing front, difficulty opening/closing, visible damage

• Includes 1 pantry drawer front

• Empty and remove the pantry/deli drawer from the refrigerator
• Release retaining tabs or screws to separate the old front from the bin; transfer any hardware if reused
• Snap or screw the new front into place, ensuring full engagement on both sides
• Disconnect power and wear gloves to protect hands from sharp plastic edges

Replacement drum support roller that helps the dryer drum rotate smoothly and quietly. Installs where the drum rests to reduce noise and uneven rotation caused by worn or damaged rollers. What it does:

• Supports and guides the tumble/drum as it spins to maintain proper alignment.
• Reduces squeaks, rumbling, and scraping noises from worn or seized rollers.
• Prevents excessive belt wear and uneven drum movement that can lead to vibration.
• Restores smoother rotation when original rollers are cracked, worn, or binding.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Access the roller by removing the dryer access panel or drum per your model's service instructions; support the drum to prevent it from falling.
• Inspect adjacent parts (idler, rollers, shaft, and belt) and replace if worn to avoid repeated failures.

This glass shelf replaces a broken or missing refrigerator shelf to restore usable storage space and keep items stable. Durable, low-profile design gives a smooth, easy-to-clean surface for food and containers. What it does:

• Provides a flat, stable surface for storing food and containers inside the refrigerator
• Replaces cracked, chipped, or missing glass shelves that cause items to tilt or fall
• Helps contain spills and makes cleanup easier compared with wire shelving
• Seats into existing shelf supports or track to maintain proper airflow and spacing

• Handle with care; glass can break if dropped—use gloves and two people for safer handling
• Slide into existing shelf supports or ledges; do not force into place
• If shelf clips or brackets are damaged, replace them before installing the new shelf
• Do not use shelf if cracked; dispose of damaged glass safely

This Whirlpool Front Pan is an OEM part for select Whirlpool refrigerator models. Specifically designed for the interior storage section of the refrigerator, this front pan provides a durable and convenient space for organizing and storing food items.

The front pan in a refrigerator can experience wear or damage over time due to regular use, heavy storage items, or accidental impacts. Common issues include cracking, warping, or breaking, which can reduce the usability of the refrigerator's storage space and affect its overall aesthetic.

Symptoms of a damaged fridge front pan include:

• Visible cracks or breaks in the pan.
• Difficulty in sliding the pan in and out or fitting it securely.
• Sagging or warping, especially under the weight of stored items.
• The pan becomes loose or dislodges easily.
• Reduced effectiveness in organizing and storing food items.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

This top shelf assembly is the glass shelf used at the top of the refrigerator compartment to support food and containers, restoring stable, easy-to-organize storage and a finished interior appearance. What it does

• Provides a sturdy glass surface for storing food and beverages in the refrigerator.
• Replaces cracked, chipped or missing top shelf that causes instability or items to fall.
• Helps maintain proper airflow and organization when installed in the designated shelf slot.
• Matches OEM fit and form for direct replacement when the original shelf is damaged.

• Remove all items from the shelf area before installing to avoid spills or breakage.
• Handle glass carefully and wear gloves to protect hands from sharp edges.
• Slide the shelf into the designated rails or supports until fully seated; confirm it is level and secure before loading.
• Replace damaged components before use.

The Crisper Drawer Front is an OEM part for Whirlpool refrigerators. This maintains the appearance and functionality of the refrigerator's crisper drawer, where fruits and vegetables are stored. It attaches to the crisper drawer to enclose and preserve the freshness of its contents by maintaining optimal humidity levels. 

Common causes of damage include regular wear and tear from frequent use, accidental impact, or pressure from overloading the drawer. A compromised drawer front can hinder the drawer’s functionality and aesthetic

Symptoms of a bad Crisper Drawer Front include:

• Cracks or breaks that compromise the seal of the drawer
• Discoloration or fogging that reduces visibility
• Difficulty in sliding the drawer in and out due to misalignment

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement frame serves as the exterior trim for the appliance door, restoring appearance and helping secure door components. It fits where the original trim is damaged, bent, or separating from the door assembly. What it does:

• Replaces a damaged or worn door trim to restore the door's exterior fit and finish
• Helps hold door glass and inner components in proper alignment
• Can reduce air leaks or improper sealing caused by a bent or warped trim
• Improves overall appearance when the original frame is scratched, dented, or cracked

• Disconnect power to the appliance before starting any repair
• Remove door and/or inner door panels per the service manual to access mounting screws and retainers
• Handle any glass panels with care and use proper protective equipment

This replacement cover restores the appliance's exterior appearance and protects internal components from dirt and accidental contact. It fits where the original cover was removed or damaged, helping keep controls and wiring protected. What it does

• Replaces a damaged, cracked, or missing access panel to restore cabinet protection and appearance
• Shields internal components from dust, spills, and incidental contact
• Helps prevent accidental access to wiring and electrical parts
• Useful when the original cover is warped, broken, or no longer securing in place

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove any retaining screws or clips from the original cover; installation typically reverses removal
• Handle edges carefully to avoid cuts; use gloves if panels are sharp
• Inspect and replace fasteners or mounting tabs as needed for a secure fit

Note: The pan does not come with the Axle WPW10257246 and Roller WPW10248544. Order quantity needed.

This replacement plate (burner drip bowl) sits under a cooktop burner to catch spills and protect the cooktop. It restores a clean appearance and helps prevent food and liquids from contacting the heating element. What it does:

• Catches drips and boiled-over food to keep the cooktop surface cleaner
• Shields the heating element or burner area from debris that can cause smoking or uneven heating
• Helps the burner sit flush and stable in the cooktop opening
• Visible cracks, warping, heavy corrosion, or large dents can cause poor fit or increased spills

• One replacement plate (burner drip bowl)

• Disconnect power (or shut off gas) to the appliance before beginning any work
• Allow the cooktop and burner to cool fully; use gloves to avoid sharp edges
• Remove the old plate by lifting or releasing any retaining clips; install the new plate in the same orientation so the burner seats properly

This is a replacement mounting plate that secures and supports internal components for proper alignment and stable operation. Restores structural support and helps maintain correct positioning of nearby parts. What it does:

• Provides a stable mounting surface for adjacent components to prevent movement or vibration
• Keeps parts aligned so mechanisms operate smoothly and reliably
• Replaces a damaged, bent, or corroded plate that can cause rattling or misalignment
• Helps maintain proper spacing to protect wiring and connectors from contact or wear

• Disconnect power before beginning any repair to avoid shock or injury
• Installation typically requires basic hand tools; handle edges carefully
• Inspect nearby fasteners, clips, and gaskets and replace if damaged

This small crisper pan is the replacement plastic tray that sits under the crisper drawer to support produce and catch spills, helping keep the refrigerator interior clean and organized. What it does:

• Supports the crisper drawer and helps keep stored produce level
• Catches moisture and small leaks to protect the refrigerator floor
• Helps contain spills for easier cleanup and prevents mess spreading
• Restores proper fit and function when the original pan is cracked or warped

• Remove all food from the crisper area before replacing the pan
• Slide the crisper drawer out to access the pan; lift out the old pan and set the new pan into the same position
• Inspect surrounding rails and seals for damage while installing
• No special tools required; handle plastic parts gently to avoid cracking

Right Hand

This crisper drawer roller guide mounts to the refrigerator shelf/frame and forms the track the drawer's roller rides in. Replacing a worn guide restores smooth, aligned drawer movement and helps prevent the crisper from sticking or coming off track.

• Guides and supports the crisper drawer roller to keep the drawer on its track
• Helps the drawer open and close smoothly and evenly
• Common symptoms of a failed guide: drawer sticks, tilts, wobbles, or pops off track
• Physical damage or wear to the guide can impede drawer travel

• Disconnect power and remove the crisper drawer and shelf/glass for access.
• Locate the damaged guide; release its locking tabs or remove the retaining screw(s).
• Align the new guide in the same orientation and secure it without overtightening.
• Reinstall the shelf and drawer; verify smooth drawer operation.

This trim piece restores the finished appearance of your appliance where trim has become cracked, chipped, or missing. It provides a clean, factory look while protecting the exposed edge or opening. What it does:

• Covers and protects an exposed edge or seam for a finished appearance
• Replaces cracked, warped, or otherwise damaged trim that affects looks
• Helps maintain the appliance's original styling and visual fit
• Simple, non-electrical part — no wiring or moving components

• Remove power to the appliance and follow the manufacturer's service instructions before starting.
• Installation typically requires basic hand tools and careful removal of old trim to avoid damaging surrounding surfaces.
• Keep mounting screws or clips from the original trim if re-using; replace only with manufacturer-specified fasteners.

Replacement housing assembly that secures internal components and restores structural support and alignment. Installs in the appliance to protect parts from debris and damage while helping reduce vibration and rattling caused by loose or broken housings. What it does:

• Provides a mounting surface and enclosure for internal components to keep them properly aligned.
• Protects parts from debris and accidental contact that can cause damage or electrical shorts.
• Helps reduce noise and vibration by stabilizing moving parts and maintaining correct clearances.
• A cracked or damaged housing can cause rattling, loose or misaligned components, and decreased performance.

• Disconnect power (and water/gas if applicable) before beginning any repair.
• Handle carefully; edges may be sharp. Use basic hand tools and keep fasteners organized.
• Follow the appliance manufacturer's service instructions for removal and replacement.

This replacement support helps secure and stabilize its matching component inside your appliance, restoring proper alignment and a solid fit. A worn or broken support can lead to looseness, misalignment, or vibration and noise during use. What it does

• Provides structural support and correct positioning for the associated part or assembly
• Maintains alignment to help ensure smooth operation and proper fit
• Replaces cracked, warped, or missing supports
• Common symptoms: sagging or wobbling component, rubbing/scraping, rattling or vibration, visible damage

• 1 support

• Disconnect power; shut off gas/water if applicable before servicing
• Note the original orientation and mounting points; take a photo for reference
• Transfer any reusable clips/screws from the old part to the new support
• After installation, verify a secure fit and test operation

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

A small mounting screw used to secure appliance panels and components. This genuine replacement restores proper fit and reduces vibration or loose parts when a missing or stripped fastener causes fit issues. What it does:

• Secures panels, trim, or internal components to the appliance frame
• Helps stop rattling or movement caused by a missing or loose screw
• Restores correct alignment where a fastener is lost or damaged
• Works as a direct-fit replacement when the original screw is worn or stripped

• The screw shown/listed

• Disconnect power (and gas if applicable) before any repair
• Use the matching screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage
• Keep small parts away from children and store removed hardware for reference

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

This decorative trim piece replaces a damaged or worn exterior trim to restore the appliance's finished appearance and fit. It provides a clean edge and helps cover mounting gaps around the control area. What it does:

• Covers and protects the appliance edge where trim is installed, improving appearance
• Hides gaps between panels and the control area for a finished look
• Replaces cracked, chipped, bent, or missing trim that affects aesthetics
• Prevents sharp or exposed edges that can catch clothing or skin

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Typical installation requires removing adjacent screws or clips; have a screwdriver set handy
• Handle edges carefully; trim and surrounding metal can be sharp

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head