Parts for Whirlpool WRF757SDHV02: Shelf Parts

Replace a cracked or loose front on your refrigerator's full-width pantry/deli drawer. This pantry drawer front restores a secure handle and clean look so the drawer operates smoothly and keeps contents organized. What it does:

• Serves as the front panel and handle for the refrigerator's pantry/deli drawer
• Replaces broken, cracked, warped, or missing fronts
• Helps the drawer align, slide, and close properly
• Common symptoms: loose or missing front, difficulty opening/closing, visible damage

• Includes 1 pantry drawer front

• Empty and remove the pantry/deli drawer from the refrigerator
• Release retaining tabs or screws to separate the old front from the bin; transfer any hardware if reused
• Snap or screw the new front into place, ensuring full engagement on both sides
• Disconnect power and wear gloves to protect hands from sharp plastic edges

Replacement drum support roller that helps the dryer drum rotate smoothly and quietly. Installs where the drum rests to reduce noise and uneven rotation caused by worn or damaged rollers. What it does:

• Supports and guides the tumble/drum as it spins to maintain proper alignment.
• Reduces squeaks, rumbling, and scraping noises from worn or seized rollers.
• Prevents excessive belt wear and uneven drum movement that can lead to vibration.
• Restores smoother rotation when original rollers are cracked, worn, or binding.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Access the roller by removing the dryer access panel or drum per your model's service instructions; support the drum to prevent it from falling.
• Inspect adjacent parts (idler, rollers, shaft, and belt) and replace if worn to avoid repeated failures.

The Shelf-Glas is an OEM part for Whirlpool refrigerators. This glass refrigerator shelf provides storage space within the refrigerator compartment. The shelf is responsible for providing an even, sturdy surface to neatly organize and display items inside the fridge. Its transparent glass construction allows for easy visibility of contents stored on the shelf.

Over time, glass shelves can develop cracks or chips, especially if heavier items are dropped onto the shelf. The glass may also dull or become stained through regular cleaning. 

Symptoms of a damaged shelf include:

• Cracks or chips in the glass that could cause cut risks
• Dull, stained, or grimy glass that is difficult to properly clean
• Sagging or uneven shelf surfaces
• Broken shelf clips or mounting hardware

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Whirlpool Front Pan is an OEM part for select Whirlpool refrigerator models. Specifically designed for the interior storage section of the refrigerator, this front pan provides a durable and convenient space for organizing and storing food items.

The front pan in a refrigerator can experience wear or damage over time due to regular use, heavy storage items, or accidental impacts. Common issues include cracking, warping, or breaking, which can reduce the usability of the refrigerator's storage space and affect its overall aesthetic.

Symptoms of a damaged fridge front pan include:

• Visible cracks or breaks in the pan.
• Difficulty in sliding the pan in and out or fitting it securely.
• Sagging or warping, especially under the weight of stored items.
• The pan becomes loose or dislodges easily.
• Reduced effectiveness in organizing and storing food items.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

This is a glass shelf that serves as a genuine replacement for shelves in refrigerators. The glass shelf is used to store food in the refrigerator. If the shelf is not fitting correctly, or if it has been damaged, it should be replaced as soon as possible.Refrigerator shelves may crack or break from impact or being overloaded with heavy food. A broken shelf can be dangerous, so owners will want to handle the repair as soon as they can. Installation is easy, but owners should wear gloves to keep their hands safe.This glass shelf will work with Frigidaire refrigerators. The shelf is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.

The Crisper Drawer Front is an OEM part for Whirlpool refrigerators. This maintains the appearance and functionality of the refrigerator's crisper drawer, where fruits and vegetables are stored. It attaches to the crisper drawer to enclose and preserve the freshness of its contents by maintaining optimal humidity levels. 

Common causes of damage include regular wear and tear from frequent use, accidental impact, or pressure from overloading the drawer. A compromised drawer front can hinder the drawer’s functionality and aesthetic

Symptoms of a bad Crisper Drawer Front include:

• Cracks or breaks that compromise the seal of the drawer
• Discoloration or fogging that reduces visibility
• Difficulty in sliding the drawer in and out due to misalignment

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Storage Drawer is an OEM replacement part for Whirlpool refrigerators. It provides customizable organization for items like snack foods, beverages, and condiments inside the refrigerator cabinet. The drawer measures approximately 27"x 20"x 6".

Causes of a bad storage drawer can include broken mounting slides, making it difficult to open or close securely. Overpacking may also cause cracks in the plastic construction over time.

Symptoms of a bad storage drawer include:

• Will not stay fully closed when loaded
• Mounting brackets crack or break off from vibration
• Contents spill out easily due to loose fit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This glass shelf provides a flat, stable storage surface inside the refrigerator to help organize food and containers. It replaces damaged, cracked, or missing shelves to restore usable shelf space and proper storage. What it does:

• Replaces an interior refrigerator shelf that holds food containers and items
• Restores level storage when the original shelf is cracked, chipped, or broken
• Helps keep spills contained on a removable surface for easier cleaning
• Fits into existing shelf support rails to reestablish proper shelf spacing

• Remove all contents from the shelf area before installing to avoid spills or injury
• Slide the shelf into the existing support rails or brackets until it seats securely
• Handle carefully and lift straight to avoid chipping; wear gloves to reduce risk of cuts
• If shelf support rails or clips are damaged, replace them before installing the new shelf

The Shelf-Glas is an OEM part for Whirlpool refrigerators. The shelf-glas fits securely in place and is designed to withstand normal use and cleaning. It provides an easy to access and simple way to store condiments, snacks, beverages and other small items you need quick access to on a daily basis.

Causes of a bad shelf-glas include cracks or chips that compromise its structure and functionality. Broken edges or pieces that have detached from the frame can be hazardous.

Symptoms of a bad shelf-glas include:

• Items falling through cracks or chips
• Difficulty removing or inserting items due to broken edges or missing pieces
• Safety hazards posed by sharp edges or loose glass fragments

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This crisper cover frame supports and secures the refrigerator crisper shelf, helping keep produce organized and stable. It restores a proper fit for the crisper area so drawers and shelves operate smoothly. What it does:

• Holds the crisper shelf or cover in place so drawers slide correctly
• Replaces cracked, warped, or broken frame pieces that cause misalignment
• Helps maintain an even surface for produce and containers
• Reduces rattling or shifting of the crisper cover during normal use

• One crisper cover frame

• Basic snap-in or screw mount installation; verify orientation before fastening
• Use gentle pressure to avoid damaging adjacent plastic parts or glass shelves
• Disconnect power if removal requires moving interior lights or electrical components

Note: The pan does not come with the Axle WPW10257246 and Roller WPW10248544. Order quantity needed.

This is a replacement mounting plate that secures and supports internal components for proper alignment and stable operation. Restores structural support and helps maintain correct positioning of nearby parts. What it does:

• Provides a stable mounting surface for adjacent components to prevent movement or vibration
• Keeps parts aligned so mechanisms operate smoothly and reliably
• Replaces a damaged, bent, or corroded plate that can cause rattling or misalignment
• Helps maintain proper spacing to protect wiring and connectors from contact or wear

• Disconnect power before beginning any repair to avoid shock or injury
• Installation typically requires basic hand tools; handle edges carefully
• Inspect nearby fasteners, clips, and gaskets and replace if damaged

This is a replacement mounting plate that secures and supports components inside your appliance, restoring proper fit and alignment for safe, reliable operation. It helps maintain correct spacing and attachment where the original plate is worn or damaged. What it does:

• Provides structural support for attached components and panels
• Restores proper alignment to reduce vibration and rattling
• Replaces a cracked, bent, or corroded plate that no longer holds parts securely
• Helps prevent wear on fasteners and adjacent parts by keeping them correctly positioned

• One replacement mounting plate

• High-level replacement only; installation requires basic hand tools and removal of adjacent panels
• Follow manufacturer service instructions for disassembly and reassembly
• Disconnect power (and gas, if applicable) before servicing the appliance
• If fasteners or clips are missing or damaged, replace them with OEM-recommended hardware

This small crisper pan is the replacement plastic tray that sits under the crisper drawer to support produce and catch spills, helping keep the refrigerator interior clean and organized. What it does:

• Supports the crisper drawer and helps keep stored produce level
• Catches moisture and small leaks to protect the refrigerator floor
• Helps contain spills for easier cleanup and prevents mess spreading
• Restores proper fit and function when the original pan is cracked or warped

• Remove all food from the crisper area before replacing the pan
• Slide the crisper drawer out to access the pan; lift out the old pan and set the new pan into the same position
• Inspect surrounding rails and seals for damage while installing
• No special tools required; handle plastic parts gently to avoid cracking

This replacement plate secures internal components and helps restore proper alignment and stability in the appliance. Replacing a damaged or missing plate prevents loose parts and abnormal noises for safer, more reliable operation. What it does:

• Secures and supports nearby components to maintain correct positioning
• Prevents movement that can cause rattling, vibration, or contact with other parts
• Restores mounting points that may be bent, cracked, or worn
• Helps maintain proper alignment for associated assemblies

• Disconnect power (and water if applicable) before starting any repair
• Use basic hand tools; handle edges carefully to avoid cuts
• Inspect surrounding mounting hardware and replace any damaged fasteners
• Refer to your model-specific service manual or schematic for exact placement and torque specs

This crisper drawer roller guide mounts to the refrigerator shelf/frame and forms the track the drawer's roller rides in. Replacing a worn guide restores smooth, aligned drawer movement and helps prevent the crisper from sticking or coming off track.

• Guides and supports the crisper drawer roller to keep the drawer on its track
• Helps the drawer open and close smoothly and evenly
• Common symptoms of a failed guide: drawer sticks, tilts, wobbles, or pops off track
• Physical damage or wear to the guide can impede drawer travel

• Disconnect power and remove the crisper drawer and shelf/glass for access.
• Locate the damaged guide; release its locking tabs or remove the retaining screw(s).
• Align the new guide in the same orientation and secure it without overtightening.
• Reinstall the shelf and drawer; verify smooth drawer operation.

This trim piece restores the finished appearance of your appliance where trim has become cracked, chipped, or missing. It provides a clean, factory look while protecting the exposed edge or opening. What it does:

• Covers and protects an exposed edge or seam for a finished appearance
• Replaces cracked, warped, or otherwise damaged trim that affects looks
• Helps maintain the appliance's original styling and visual fit
• Simple, non-electrical part — no wiring or moving components

• Remove power to the appliance and follow the manufacturer's service instructions before starting.
• Installation typically requires basic hand tools and careful removal of old trim to avoid damaging surrounding surfaces.
• Keep mounting screws or clips from the original trim if re-using; replace only with manufacturer-specified fasteners.

Replacement housing assembly that secures internal components and restores structural support and alignment. Installs in the appliance to protect parts from debris and damage while helping reduce vibration and rattling caused by loose or broken housings. What it does:

• Provides a mounting surface and enclosure for internal components to keep them properly aligned.
• Protects parts from debris and accidental contact that can cause damage or electrical shorts.
• Helps reduce noise and vibration by stabilizing moving parts and maintaining correct clearances.
• A cracked or damaged housing can cause rattling, loose or misaligned components, and decreased performance.

• Disconnect power (and water/gas if applicable) before beginning any repair.
• Handle carefully; edges may be sharp. Use basic hand tools and keep fasteners organized.
• Follow the appliance manufacturer's service instructions for removal and replacement.

This replacement support helps secure and stabilize its matching component inside your appliance, restoring proper alignment and a solid fit. A worn or broken support can lead to looseness, misalignment, or vibration and noise during use. What it does

• Provides structural support and correct positioning for the associated part or assembly
• Maintains alignment to help ensure smooth operation and proper fit
• Replaces cracked, warped, or missing supports
• Common symptoms: sagging or wobbling component, rubbing/scraping, rattling or vibration, visible damage

• 1 support

• Disconnect power; shut off gas/water if applicable before servicing
• Note the original orientation and mounting points; take a photo for reference
• Transfer any reusable clips/screws from the old part to the new support
• After installation, verify a secure fit and test operation

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

A small mounting screw used to secure appliance panels and components. This genuine replacement restores proper fit and reduces vibration or loose parts when a missing or stripped fastener causes fit issues. What it does:

• Secures panels, trim, or internal components to the appliance frame
• Helps stop rattling or movement caused by a missing or loose screw
• Restores correct alignment where a fastener is lost or damaged
• Works as a direct-fit replacement when the original screw is worn or stripped

• The screw shown/listed

• Disconnect power (and gas if applicable) before any repair
• Use the matching screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage
• Keep small parts away from children and store removed hardware for reference

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

This decorative trim piece replaces a damaged or worn exterior trim to restore the appliance's finished appearance and fit. It provides a clean edge and helps cover mounting gaps around the control area. What it does:

• Covers and protects the appliance edge where trim is installed, improving appearance
• Hides gaps between panels and the control area for a finished look
• Replaces cracked, chipped, bent, or missing trim that affects aesthetics
• Prevents sharp or exposed edges that can catch clothing or skin

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Typical installation requires removing adjacent screws or clips; have a screwdriver set handy
• Handle edges carefully; trim and surrounding metal can be sharp

This replacement cover protects and conceals the appliance's control panel components, restoring a finished appearance and helping keep wiring and switches safe from dust and spills. It's a simple cosmetic and protective part. What it does:

• Covers and protects control panel electronics and switches from dirt and moisture
• Restores the appliance's finished look when the original cover is cracked, warped, or missing
• Helps prevent accidental contact with controls and wiring
• Compatible with standard fasteners used on the control assembly

• Always disconnect power (unplug the appliance or shut off the breaker) before starting work.
• Typical installation requires removing the existing cover and fastening the replacement with common hand tools (screwdriver); keep track of screws and small parts.
• Handle plastic parts gently to avoid scratches or cracks during installation.

This pantry top cover is the molded interior trim piece that fits above the refrigerator pantry/produce area, restoring a finished look and protecting the pantry opening from wear and debris. It replaces cracked, warped or missing covers. What it does:

• Covers the top of the pantry/produce opening to keep the interior tidy and prevent items from catching on exposed edges
• Restores proper interior trim and appearance after damage or loss
• Helps maintain proper airflow pattern in the pantry area by replacing a missing or damaged cover
• Common symptom: cover is cracked, broken, loose or missing, leaving the pantry edge exposed

• High-level snap-in or screw-in installation; verify fasteners before reassembly
• Remove food and close the door while working; handle gently to avoid scratching the finish
• Unplug or disconnect power to the appliance only if required by your model before accessing internal components

Tempered glass shelf that replaces a broken or missing refrigerator shelf to restore a stable, easy-to-clean storage surface. Fits into existing shelf supports to help organize food and containers. What it does:

• Provides a level, sturdy surface for storing food, dishes, and containers.
• Replaces cracked, chipped, or shattered shelves that can cause instability or safety concerns.
• Tempered construction offers added strength and a safer break pattern than non-tempered glass.
• Easy-to-clean smooth surface helps contain spills and simplifies maintenance.

• Remove food and adjustable shelving above/below before installing to avoid damage.
• Handle with care and wear protective gloves; glass can be heavy and sharp if damaged.
• Slide shelf into existing support rails or brackets until fully seated; correct orientation per your owner's manual.

This rail is a replacement oven rack support that helps guide and stabilize the oven rack for smooth in-and-out movement and correct rack alignment during cooking. It restores proper support when the original rail is bent or worn. What it does:

• Guides the oven rack so cookware slides in and out smoothly
• Keeps the rack properly aligned to prevent tipping or uneven cooking
• Replaces damaged or bent rails that cause rack instability
• Helps maintain safe, predictable rack movement during use

• One rail

• Disconnect power to the appliance before beginning any repair
• Remove oven racks and follow the OEM instructions for rail removal and installation
• Use proper tools and avoid forcing parts; inspect mounting points for damage