Parts for Whirlpool WRF954CIHZ01: Shelf Parts

The Whirlpool EveryDrop Ice and Water Refrigerator Filter 2 is an OEM replacement part for Whirlpool refrigerators. This advanced water filter is designed to provide superior filtration for both the ice maker and water dispenser. This water filter effectively reduces numerous contaminants, including lead, pesticides, and pharmaceuticals, ensuring that your drinking water and ice are not only clean but also taste great.  

Regular replacement of the EveryDrop Filter is recommended to maintain optimal performance and water quality. Over time, filters can become clogged with particles and contaminants, leading to reduced water flow and a decline in the effectiveness of filtration.

Symptoms of a filter that needs to be replaced include:

• Noticeable decrease in water flow rate from the dispenser
• Unpleasant taste or odor in the water and ice
• The filter indicator light on the refrigerator turns on

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

This handle pan is the replacement door-handle trim that restores a finished look and provides a secure grip for opening the appliance door. It replaces damaged or cracked trim to improve appearance and usability. What it does

• Covers and supports the door handle area, protecting the mounting hardware
• Restores a solid grip when original trim is cracked, broken, or missing
• Helps keep the handle stable and reduces wobble from damaged trim
• Visible cosmetic repair that returns the door to a finished appearance

• One handle pan as shown

• Disconnect power or unplug the appliance before starting any repair
• Remove any handle screws or trim fasteners, then lift or snap out the old pan per OEM instructions
• Align new pan and secure using existing hardware; do not overtighten fasteners

This small, spring-action push latch mounts in trim or liner to secure a flip-down compartment door or cover. Replacing a worn latch restores a positive close and smooth push-to-open operation to the affected door or panel.

• Provides the push-to-latch/push-to-release catch for a small door or cover
• Helps prevent nuisance pop-opens and rattling
• Common symptoms: door/cover won't stay shut, latch feels loose, cracked or missing latch
• Restores proper engagement and closing feel

• Disconnect power to the appliance before starting
• Open the compartment; depress retaining tabs or gently pry the old latch straight out
• Match orientation and snap the new latch fully into the opening
• Test operation: close to latch, press to release

This flat glass shelf provides a sturdy, easy-to-clean surface for storing food and containers inside the refrigerator. It restores usable shelving space and keeps items organized while letting light pass through for better visibility. What it does:

• Replaces a cracked, chipped, or missing refrigerator shelf to restore normal storage
• Supports food containers, produce bins, and small appliances used inside the fridge
• Tempered glass construction resists everyday thermal and impact stresses
• Allows light to pass through, improving interior visibility and appearance

• One flat tempered glass shelf

• Handle carefully; glass edges and corners can be sharp—wear cut-resistant gloves
• Place shelf into the existing shelf tracks or supports; ensure it seats fully and evenly before loading
• Do not overtighten or force into position; check that shelf is level and supported on all sides
• If damaged on arrival, stop installation and contact customer service for replacement

This replacement shelf stud secures a refrigerator shelf or door bin to the liner, restoring proper support and preventing shelves from sagging or coming loose. Easy way to repair a cracked, broken, or missing shelf anchor. What it does

• Mounts into the liner to hold a shelf or door bin securely in place
• Restores correct shelf alignment and prevents sliding or tipping
• Stops shelves from sagging or falling when weight is applied
• Common fix when the original stud is cracked, stripped, or missing

• Remove food and shelves/bins from the area before replacing the stud
• Install by pressing or snapping into the liner; use gentle hand pressure or appropriate non-marring tools
• Do not force or overtighten; check that the shelf/binnests seat securely after installation

A shelf mounting stud that secures a shelf or shelf bracket to the cabinet, helping restore proper shelf alignment and prevent slipping or dropping of items. Simple replacement keeps shelving stable and usable. What it does:

• Anchors a shelf or shelf bracket to the cabinet frame for secure support.
• Prevents shelf movement, sagging, or falling that can occur when a stud is cracked, bent, or missing.
• Restores correct shelf alignment so glass or wire shelving sits level and locks into place.
• Small, low-profile replacement used where original mounting studs have worn or broken.

• Disconnect power to the appliance before working near electrical components; remove stored items from the shelf first.
• Use basic hand tools to remove the old stud and install the replacement; retain original hardware if undamaged.
• Inspect surrounding shelf clips/brackets and the shelf edge for wear; replace damaged components to ensure a safe repair.

This interior refrigerator shelf provides a stable surface to organize food and containers, restoring usable storage space and helping prevent spills. Designed to replace a cracked, chipped or missing shelf so you can safely store items again. What it does:

• Replaces a broken, chipped or missing interior refrigerator shelf
• Supports food containers and prevents items from falling through or sliding
• Helps contain minor spills and keeps the refrigerator organized
• Restores proper shelf spacing for efficient use of cabinet space

• Remove all food and loose items before replacing the shelf
• Handle carefully—glass shelves can be heavy and may be tempered; wear gloves for protection
• Slide or set the shelf into the factory tracks or support ledges until seated securely
• Do not force a damaged shelf into place; inspect supports for damage and replace if needed

This OEM wire assembly routes power and signals to the refrigerator pantry compartment so lights, sensors, and controls receive reliable connections. Replaces a damaged or worn pantry harness to restore proper electrical continuity and component operation. What it does:

• Connects pantry compartment components (lights, sensors, controls) to the main wiring harness
• Restores electrical continuity when a broken wire or connector causes intermittent or no power
• Helps eliminate pantry light failures, sensor/thermostat communication issues, and related symptoms
• Provides factory-style connectors and routing for a clean, secure fit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Inspect connectors and routing; match original connector orientation and secure with existing clips or ties
• Do not splice or modify wiring; use the exact replacement harness for proper fit and function

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal

This is a replacement trim frame that restores the appliance's front appearance and helps secure the control/door assembly. It provides a finished look and protects internal components from dust and damage. What it does:

• Replaces a cracked, warped, or damaged front trim that causes gaps or an uneven fit
• Helps hold the control panel or door components in correct alignment
• Protects the appliance internals from debris and improves cosmetic appearance
• Reduces rattling or movement caused by a loose or broken trim

• One trim frame

• Disconnect power to the appliance before beginning any repair
• Typical installation requires removing the outer panel or control bezel and a few screws or clips
• Handle painted or coated surfaces carefully to avoid scratching; use appropriate trim-safe tools