Parts for Whirlpool WRF954CIHZ02: Shelf Parts

This handle pan is the replacement door-handle trim that restores a finished look and provides a secure grip for opening the appliance door. It replaces damaged or cracked trim to improve appearance and usability. What it does

• Covers and supports the door handle area, protecting the mounting hardware
• Restores a solid grip when original trim is cracked, broken, or missing
• Helps keep the handle stable and reduces wobble from damaged trim
• Visible cosmetic repair that returns the door to a finished appearance

• One handle pan as shown

• Disconnect power or unplug the appliance before starting any repair
• Remove any handle screws or trim fasteners, then lift or snap out the old pan per OEM instructions
• Align new pan and secure using existing hardware; do not overtighten fasteners

This small, spring-action push latch mounts in trim or liner to secure a flip-down compartment door or cover. Replacing a worn latch restores a positive close and smooth push-to-open operation to the affected door or panel.

• Provides the push-to-latch/push-to-release catch for a small door or cover
• Helps prevent nuisance pop-opens and rattling
• Common symptoms: door/cover won't stay shut, latch feels loose, cracked or missing latch
• Restores proper engagement and closing feel

• Disconnect power to the appliance before starting
• Open the compartment; depress retaining tabs or gently pry the old latch straight out
• Match orientation and snap the new latch fully into the opening
• Test operation: close to latch, press to release

This flat glass shelf provides a sturdy, easy-to-clean surface for storing food and containers inside the refrigerator. It restores usable shelving space and keeps items organized while letting light pass through for better visibility. What it does:

• Replaces a cracked, chipped, or missing refrigerator shelf to restore normal storage
• Supports food containers, produce bins, and small appliances used inside the fridge
• Tempered glass construction resists everyday thermal and impact stresses
• Allows light to pass through, improving interior visibility and appearance

• One flat tempered glass shelf

• Handle carefully; glass edges and corners can be sharp—wear cut-resistant gloves
• Place shelf into the existing shelf tracks or supports; ensure it seats fully and evenly before loading
• Do not overtighten or force into position; check that shelf is level and supported on all sides
• If damaged on arrival, stop installation and contact customer service for replacement

This replacement shelf stud secures a refrigerator shelf or door bin to the liner, restoring proper support and preventing shelves from sagging or coming loose. Easy way to repair a cracked, broken, or missing shelf anchor. What it does

• Mounts into the liner to hold a shelf or door bin securely in place
• Restores correct shelf alignment and prevents sliding or tipping
• Stops shelves from sagging or falling when weight is applied
• Common fix when the original stud is cracked, stripped, or missing

• Remove food and shelves/bins from the area before replacing the stud
• Install by pressing or snapping into the liner; use gentle hand pressure or appropriate non-marring tools
• Do not force or overtighten; check that the shelf/binnests seat securely after installation

A shelf mounting stud that secures a shelf or shelf bracket to the cabinet, helping restore proper shelf alignment and prevent slipping or dropping of items. Simple replacement keeps shelving stable and usable. What it does:

• Anchors a shelf or shelf bracket to the cabinet frame for secure support.
• Prevents shelf movement, sagging, or falling that can occur when a stud is cracked, bent, or missing.
• Restores correct shelf alignment so glass or wire shelving sits level and locks into place.
• Small, low-profile replacement used where original mounting studs have worn or broken.

• Disconnect power to the appliance before working near electrical components; remove stored items from the shelf first.
• Use basic hand tools to remove the old stud and install the replacement; retain original hardware if undamaged.
• Inspect surrounding shelf clips/brackets and the shelf edge for wear; replace damaged components to ensure a safe repair.

This interior refrigerator shelf provides a stable surface to organize food and containers, restoring usable storage space and helping prevent spills. Designed to replace a cracked, chipped or missing shelf so you can safely store items again. What it does:

• Replaces a broken, chipped or missing interior refrigerator shelf
• Supports food containers and prevents items from falling through or sliding
• Helps contain minor spills and keeps the refrigerator organized
• Restores proper shelf spacing for efficient use of cabinet space

• Remove all food and loose items before replacing the shelf
• Handle carefully—glass shelves can be heavy and may be tempered; wear gloves for protection
• Slide or set the shelf into the factory tracks or support ledges until seated securely
• Do not force a damaged shelf into place; inspect supports for damage and replace if needed

This OEM wire assembly routes power and signals to the refrigerator pantry compartment so lights, sensors, and controls receive reliable connections. Replaces a damaged or worn pantry harness to restore proper electrical continuity and component operation. What it does:

• Connects pantry compartment components (lights, sensors, controls) to the main wiring harness
• Restores electrical continuity when a broken wire or connector causes intermittent or no power
• Helps eliminate pantry light failures, sensor/thermostat communication issues, and related symptoms
• Provides factory-style connectors and routing for a clean, secure fit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Inspect connectors and routing; match original connector orientation and secure with existing clips or ties
• Do not splice or modify wiring; use the exact replacement harness for proper fit and function

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal

This is a replacement trim frame that restores the appliance's front appearance and helps secure the control/door assembly. It provides a finished look and protects internal components from dust and damage. What it does:

• Replaces a cracked, warped, or damaged front trim that causes gaps or an uneven fit
• Helps hold the control panel or door components in correct alignment
• Protects the appliance internals from debris and improves cosmetic appearance
• Reduces rattling or movement caused by a loose or broken trim

• One trim frame

• Disconnect power to the appliance before beginning any repair
• Typical installation requires removing the outer panel or control bezel and a few screws or clips
• Handle painted or coated surfaces carefully to avoid scratching; use appropriate trim-safe tools