Parts for Lg LBNC10551V/00: Shelves / Drawers Parts

This rear handle is a direct-replacement door handle that restores a secure grasp and smooth door operation. Durable molded construction matches the original fit to keep your refrigerator door aligned and easy to open. What it does:

• Replaces a cracked, broken or missing rear door handle to restore safe opening and closing
• Provides the mounting surface and grip for the refrigerator door latch and user access
• Helps prevent stress on door trim and fasteners caused by a damaged grip
• Matches OEM fit and attachment points for proper alignment

• One rear refrigerator door handle

• Includes the handle only; verify which fasteners or trim pieces are required for your model before installing
• Remove power to the appliance or open as recommended by the manufacturer before accessing door components
• Use proper tools to remove door trim/fasteners; take care not to over-tighten screws to avoid cracking the new handle

This rear handle is a direct-fit replacement that restores a secure grip for opening and closing the appliance door. It replaces a cracked, broken or loose rear handle so the door operates safely and comfortably. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces visibly cracked, chipped or broken handle parts
• Stops wobbling or loose-feeling door handles that make the door hard to use
• Helps prevent further cabinet or door damage caused by a failing handle

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removing the door trim or access screws; use the correct screwdriver or nut driver.
• Keep all removed fasteners for reassembly and do not overtighten replacement screws.

This supporter leg is a replacement leveling/stabilizing foot that helps keep your appliance steady and properly balanced during use. Restores support to reduce rocking and maintain correct cabinet alignment. What it does:

• Replaces a worn or damaged support leg to restore stable contact with the floor
• Helps stop rocking, tipping, and uneven operation caused by a missing or broken foot
• Supports cabinet weight and helps maintain proper appliance leveling
• Works at the appliance base to keep doors and drawers aligned

• Turn off and unplug the appliance or disconnect power before accessing the base
• Access the mounting area per your appliance service instructions; some models require removing a kickplate or leveling bracket
• Thread or slide into the existing bracket and secure per OEM directions; confirm snug fit but avoid overtightening
• Re-level appliance after installation and verify stability on a flat surface

This supporter leg is a replacement leveling/stabilizing foot that helps keep your appliance steady and properly balanced during use. Restores support to reduce rocking and maintain correct cabinet alignment. What it does:

• Replaces a worn or damaged support leg to restore stable contact with the floor
• Helps stop rocking, tipping, and uneven operation caused by a missing or broken foot
• Supports cabinet weight and helps maintain proper appliance leveling
• Works at the appliance base to keep doors and drawers aligned

• Turn off and unplug the appliance or disconnect power before accessing the base
• Access the mounting area per your appliance service instructions; some models require removing a kickplate or leveling bracket
• Thread or slide into the existing bracket and secure per OEM directions; confirm snug fit but avoid overtightening
• Re-level appliance after installation and verify stability on a flat surface

This is a replacement drawer tray assembly for the refrigerator interior. It restores a sturdy, sanitary storage surface and proper engagement with the drawer compartment so you can load and access items as intended. What it does:

• Forms the base of a refrigerator drawer to hold and organize food items
• Interfaces with the drawer's side rails/track to open and close properly
• Replaces cracked, warped, or broken trays and mounting tabs
• Common symptoms: broken corners or tabs, drawer won't stay on track, items tipping or spilling

• 1 drawer tray assembly

• Disconnect power before servicing and remove all items from the drawer
• Fully extend and lift out the drawer per model instructions; remove the damaged tray
• Transfer any reusable parts from the old tray (such as dividers)
• Seat the new tray, ensure it is fully engaged on the rails, and test drawer travel before reloading

Replace a cracked or hard-to-slide drawer with this drawer tray assembly. It restores a sturdy, smooth-sliding storage area so you can organize and access items easily while keeping contents supported and minor spills contained.

• Provides the storage surface and sidewalls for a pull-out drawer compartment
• Interfaces with existing supports/rails for smooth opening and closing
• Helps contain minor spills and prevents items from tipping
• Common symptoms: cracks, broken tabs, sagging, drawer won't seat or slides poorly

• Empty the drawer; pull it out and lift to clear the stops
• Transfer any trim, front panel, or hardware from the old tray if required
• Align on existing supports/rails and verify smooth travel before loading
• Wear cut-resistant gloves; disconnect power if working near moving parts

This Cover Tray is the replacement tray cover that protects internal components and keeps the tray area clean for reliable performance. It restores proper fit and helps prevent spills from reaching sensitive parts. What it does:

• Provides a protective barrier over the appliance tray to contain spills and debris
• Keeps the tray area clean for better operation and easier maintenance
• Helps maintain correct spacing and alignment of the tray assembly
• Replaces damaged, cracked, or warped covers that can allow leaks or dirt buildup

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the old cover tray by releasing any clips or fasteners; handle plastic parts carefully to avoid cracking
• Align the replacement cover and snap or fasten it into place until secure

This door gasket assembly seals the refrigerator door to help maintain proper temperature and energy efficiency. It replaces a worn or damaged door seal to reduce air leaks and improve cooling performance. What it does:

• Creates a tight magnetic seal around the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup, moisture accumulation, and condensation inside the compartment
• Reduces compressor run-time caused by air leaks and helps maintain consistent internal temperatures
• Corrects common symptoms like warm spots, visible gaps around the door, or excessive frost in the freezer/refrigerator

• High-level replacement: remove the old gasket, seat the new gasket into the channel, and ensure the magnetic seal is uniform around the door
• Use care when handling the gasket to avoid stretching or tearing; warm the gasket slightly if needed to ease installation
• Check door alignment and hinge condition if the new gasket does not seal evenly
• Disconnect power only if required for your model; refer to the refrigerator service manual for model-specific instructions and safety precautions

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This replacement door basket mounts to the refrigerator's inner door to provide secure, convenient storage for bottles, condiments, and small items. Install a new bin to restore organization and prevent spills when the door opens and closes. What it does:

• Attaches to the door liner to hold and organize items on the door
• Replaces a bin that is cracked, broken, warped, or missing
• Helps prevent items from tipping or falling during door operation
• Also called a door bin, door shelf, or door rack
• Common symptoms: cracked plastic, loose fit, falls off, won't stay seated

• One door basket

• Unplug the refrigerator before servicing
• Empty the existing bin; lift up and pull out to remove
• Align the new basket with the door tabs/rails and press down until fully seated
• Handle plastic carefully; do not force into place

This door basket assembly snaps into the refrigerator door to hold bottles, jars, and condiments. Replacing a cracked, loose, or missing bin restores secure, organized storage and helps keep items upright when the door opens and closes.

• Mounts to the inner door rails to provide shelf storage
• Organizes jars, bottles, and condiments on the door
• Helps keep items upright during door movement
• Common signs it's needed: cracked plastic, broken tabs, won't stay seated, or a missing bin

• Disconnect power before servicing.
• Remove the old bin by lifting up to release it from the door supports, then pull out.
• Align the new bin on the supports and slide down until fully seated.
• Verify a secure fit before loading; distribute weight evenly.

A small replacement hinge cap that covers and protects the door hinge pivot on compatible LG appliances, restoring a finished look and keeping dirt out of the hinge area for smoother operation. What it does

• Covers the exposed hinge pivot to protect it from dust, grime and accidental contact
• Helps keep the hinge pivot area clean to reduce binding and noise over time
• Restores the original appearance where a hinge cap is cracked, missing or worn
• Compatible hinge cap replacement for one door hinge position

• High-level replacement; usually snaps or slides onto the hinge pivot—no special tools typically required
• Remove power from the appliance and support the door before removing or installing hinge components to avoid injury or damage
• Inspect hinge and surrounding components for wear while replacing the cap; replace any damaged hinge hardware as needed

This hinge cover replaces a cracked or missing plastic trim that protects and conceals the door hinge area, restoring the appliance's appearance and preventing dirt buildup. It snaps or screws into place for a clean finish. What it does:

• Covers and protects the hinge mounting area from dust, grease, and accidental contact
• Restores a finished look when the original cover is broken, cracked, or missing
• Helps prevent small debris from interfering with hinge movement
• Reduces sharp edges or exposed fasteners that can catch fabric or skin

• One hinge cover

• Unplug or disconnect power to the appliance before starting any repair
• Remove any necessary trim or access panels to reach the hinge area
• Align the cover over the hinge and secure by snapping into place or fastening the original screws
• Inspect or replace the hinge assembly as needed

This upper hinge assembly restores smooth, secure pivoting for a refrigerator door so it opens and closes reliably while helping maintain a tight door seal. It's a direct-fit replacement designed to correct sagging or misaligned doors. What it does:

• Replaces a worn or damaged upper door hinge to restore proper door alignment and operation
• Helps stop door sag, rubbing, or uneven gaps that can cause cooling loss
• Reduces hinge noise and sticking during door movement
• Supports proper seal engagement to help maintain internal temperature

• One upper hinge assembly

• Disconnect power and empty or support the door before removing the hinge
• Use a second person or a secure prop to support the door while replacing the hinge
• Reinstall hardware finger-tight first, then fully torque once alignment is verified

This center hinge assembly replaces the middle hinge that lets the refrigerator doors pivot and stay aligned. It restores proper door swing and helps keep doors sealing and closing properly. What it does:

• Provides the pivot point for the center/mid refrigerator door
• Keeps both doors aligned to prevent sagging or uneven gaps
• Restores smooth opening/closing and reduces binding or grinding at the center hinge
• Helps maintain an even door seal to support proper cooling performance

• Disconnect power to the appliance before starting work.
• Support doors during removal and installation to prevent damage or injury.
• Follow OEM torque and fastener locations; reuse or replace factory screws as directed.

This lower hinge assembly secures and pivots the bottom refrigerator/freezer door so it opens and closes smoothly and stays aligned. It replaces a worn or damaged lower hinge to correct door sag and uneven sealing. What it does:

• Provides a stable pivot point for the bottom door to open and close reliably
• Restores proper door alignment to help maintain an even seal and reduce cold air loss
• Replaces cracked, bent, or worn hinge components that cause rubbing or sticking
• Helps eliminate door sag and uneven gaps along the door edge

• One lower hinge assembly

• Disconnect power to the appliance and remove contents from the door before starting
• Use a second person or support to hold the door while removing and installing the hinge
• Align hinge carefully and tighten fasteners securely; avoid over-tightening to prevent damage

This overload protector is a motor thermal cut-off that helps prevent motor overheating by interrupting power when temperatures get too high. It restores normal operation after the motor cools, helping protect the motor from heat damage. What it does:

• Senses excess motor temperature and interrupts power to prevent overheating
• Commonly used when a washer or motor hums, won't spin, or stops mid-cycle
• Protects the motor and associated components from heat-related failure
• Resets or is replaced after a thermal fault clears, depending on design

• Disconnect power before accessing the motor or electrical components
• Handle and mount the protector per OEM orientation to ensure proper thermal contact
• Inspect motor and wiring for underlying faults before replacing

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

The Drier Assembly is an OEM part for LG refrigerators. This part removes moisture and contaminants from the refrigerant, ensuring the system operates efficiently and effectively. The drier assembly helps maintain the proper function of the compressor and other cooling components, contributing to the longevity and performance of the refrigerator.

Causes of a bad drier assembly can include clogs from debris, wear and tear over time, or contamination from moisture or refrigerant leaks.  

Symptoms of a bad drier assembly include:

• The refrigerator not cooling properly
• Frost or ice buildup on the evaporator coils
• Increased noise from the compressor
• Reduced efficiency and higher energy consumption
• You should replace the drier assembly if it becomes faulty or damaged.

This OEM LG part is also compatible with select Sears/Kenmore models.

This is the evaporator fan assembly that circulates cold air throughout the freezer and refrigerator sections for even cooling. Replacing a failed assembly restores proper airflow and temperature consistency.

• Draws air across the evaporator coils and distributes it through the cabinet
• Helps maintain stable, uniform temperatures and prevents warm spots
• Common failure symptoms: buzzing or grinding from the freezer, weak/no airflow, warming in fresh food section, frost buildup around the evaporator cover
• Fits in the freezer compartment behind the rear interior panel

• Disconnect power before servicing; sharp edges may be present behind the panel
• Remove shelves and rear freezer panel to access the assembly
• Transfer any grommets/insulators in the same orientation if reused
• After installation, verify fan operation and ensure no wires contact the blade

Damper motor support secures the damper motor assembly inside the refrigerator, keeping the air-control damper aligned so it opens and closes correctly. Replacing a damaged support restores proper airflow control and reduces noise. What it does:

• Secures and positions the damper motor assembly so the air-control damper moves smoothly.
• Keeps the motor and damper aligned to help prevent rattling, grinding, or loose motor noise.
• Supports consistent airflow between compartments to assist with even cooling.
• Resolve damper movement problems like the damper not opening or closing fully.

• Disconnect power to the appliance before starting work; remove food and shelves as needed for access.
• Remove the interior access panel to reach the damper assembly; handle plastic tabs and clips gently to avoid breakage.
• Align the motor and damper during reassembly and secure all fasteners; test damper operation before replacing panels and shelving.

This main PCB power control board assembly manages a refrigerator's electrical control functions and restores proper system signaling when the original board fails. Replacing a faulty board can stop intermittent power issues and restore control of cooling and user interface functions. What it does:

• Regulates and distributes power to control circuits and user interface components
• Processes input from sensors and switches to control compressor and fans
• Replaces a failed or damaged main control board that causes no power, blank/display errors, or erratic operation
• Helps clear errors related to unresponsive controls when the board itself is confirmed faulty

• Disconnect all power before starting and verify the appliance is de-energized
• Handle the board carefully; avoid static discharge and do not touch exposed circuitry
• Reconnect all harnesses securely