Parts for Frigidaire FPHS2386LF2: 09 - Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Water Filter is an OEM replacement part for Frigidaire refrigerators. This PureSource Ultra Ultrawf Refrigerator Water Filter is designed to provide superior filtration, ensuring that your water and ice are clean and refreshing.

With the Frigidaire Refrigerator Water Filter, you can enjoy up to six months of crystal-clear water and ice. For the filter bypass, order part number 242294402. Get the most out of your Frigidaire appliance with a new OEM water filter, and enjoy clean, refreshing water and ice every time!

Causes of a bad part:

• Overused or expired
• Clogged by excessive impurities

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This shelf and trim assembly replaces a damaged or worn refrigerator shelf trim to restore a secure shelf edge and improve storage stability. It provides the finished trim piece that retains items and keeps the shelf seated correctly. What it does:

• Replaces cracked, chipped, or missing shelf trim so food and containers stay securely on the shelf
• Restores the shelf edge that helps prevent items from sliding off when opening the door
• Re-establishes a proper fit between the shelf and cabinet for stable storage
• Helps maintain the refrigerator's interior appearance by replacing worn trim

• One shelf and trim assembly

• High-level replacement only — remove food and shelves before installing
• Use basic hand tools; avoid overtightening to prevent cracking the trim
• If the shelf is damaged, replace the shelf and trim together for best fit
• Disconnect power only if service requires accessing electrical components

This refrigerator shelf restores a flat, sturdy surface for storing food and containers. Replace a broken or missing shelf to regain capacity, keep items organized, and help prevent spills inside your appliance.

• Provides a level platform to hold groceries and containers
• Helps organize contents and maximize usable space
• Replaces damaged, bent, or missing shelves
• Common symptoms: cracked/broken shelf, wobbling, items tipping, reduced storage capacity

• Empty the area and wear gloves; handle carefully to avoid injury or damage
• Align the shelf with the side supports and slide or lower it into place
• Ensure it's fully seated before loading; distribute weight evenly

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This receptacle is the mating socket for a plug-in refrigerator component, providing a secure connection for reliable operation. Replacing a worn or heat-damaged socket restores solid contact and helps prevent intermittent performance.

• Serves as the socket/interface for a plug-in component inside the appliance
• Maintains tight contact for consistent operation and safe connectivity
• Replaces loose, burned, or broken sockets that can cause heat or arcing
• Common symptoms: connected part won't run or is intermittent; loose fit; visible discoloration or melting at the socket

• Disconnect power to the appliance before servicing
• Access the socket location and note/photograph wire orientation
• Transfer wires/terminals one at a time to the new receptacle; ensure full seating
• Inspect the mating plug/harness for heat damage and replace if necessary

Restore stable storage and help contain leaks with this Spill Safe Shelf. Replacing a cracked or missing shelf brings back usable space and helps prevent spills from dripping onto lower shelves and drawers.

• Supports food and containers on the designated refrigerator level
• Spill Safe design helps contain minor leaks to the shelf area
• Replace if the shelf is cracked, warped, loose, or missing
• Common symptoms: drips reaching lower shelves, shelf no longer seating correctly, reduced storage capacity

• Remove all items from the shelf area before replacement
• Slide the old shelf out; align the rear of the new shelf with the slots/rails, then lower the front until fully seated
• Do not force into place; use the correct rail position for your model
• Handle with both hands to avoid dropping or damaging the shelf

The Cover-Crisper Pan is an OEM component compatible with Frigidaire refrigerators. It is a removable plastic cover that sits securely atop the crisper drawer pan.  The cover-crisper pan protects fresh produce and other perishable items stored below. It helps maintain optimal humidity levels to prolong crispness without allowing excess condensation to form. This pan measures approximately  14-3/4" x 19".

Causes for replacement typically include cracks or breaks resulting from repeated use over time. The plastic material can fatigue with frequent openings and closings of the crisper drawer.

Symptoms of a bad cover-crisper pan include:

• Condensation inside the crisper drawer compromises foods
• Produce like lettuce becomes soggy or slimy more quickly   
• Difficulty cleaning the drawer interior without the protective cover

This OEM Frigidaire replacement ensures continued protection and optimal storage of fruits and vegetables. Replace yours to restore full crisper functionality.

The Meat Pan Cover is an OEM part for Frigidaire refrigerators. This cover fits over the meat pan or deli drawer, providing a clear and sturdy surface that helps to maintain optimal storage conditions for meats and other deli items.

Causes of a bad meat pan cover can include regular wear and tear, accidental impacts that cause cracks or breaks, and warping from exposure to varying temperatures.

Symptoms of a bad meat pan cover include:

• Cracks or visible damage on the cover
• Difficulty sliding the meat pan in and out
• The cover not fitting securely on the pan
• Reduced freshness of stored meats due to improper sealing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This humidity control assembly regulates moisture levels in the refrigerator's crisper/produce compartment to help keep fruits and vegetables fresher. It replaces a failed or unresponsive humidity control to restore proper compartment humidity. What it does:

• Senses and adjusts airflow to the crisper/produce drawer to help control moisture levels.
• Helps reduce excess humidity that can cause wilting or increase moisture that can accelerate spoilage.
• Stops or corrects intermittent or non-responsive humidity settings that affect drawer performance.
• Can resolve issues with produce drawer not maintaining expected humidity or feeling excessively wet or dry.

• One humidity control assembly.

• Disconnect power to the appliance before beginning any work.
• Remove produce drawers and access panels as needed to reach the control; handle gently to avoid damaging clips or electrical connectors.
• Reconnect wiring harness securely and test function before fully reassembling.

The Crisper Pan is an OEM part for Frigidaire refrigerators. It provides enclosed storage for fruits and vegetables, helping maintain freshness.

Over time, the crisper pan can crack or warp due to exposure to cold, moisture, and repeated opening/closing. Damage from improper handling when loading produce can also cause failure.

Symptoms of a failing crisper pan include:

• Poor humidity regulation/airflow
• Condensation buildup inside the pan
• Visible cracks or splits in the plastic
• Difficulty sliding the crisper in and out
• Produce spoiling more quickly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Note: Due to a factory revision, the new crisper pan may not have the graphics across the front but is a genuine factory replacement part.  

The Lower Crisper Pan is an OEM part for Frigidaire refrigerators. This pan is designed to store fruits and vegetables at optimal humidity levels, keeping them fresh for longer periods. It fits at the bottom of the refrigerator, sliding in and out smoothly for easy access and organization of produce.

Causes of a bad Lower Crisper Pan can include cracks or breaks due to regular use, accidental impacts from heavy or awkwardly shaped items, or damage from improper handling during cleaning. These issues can compromise the pan's functionality, leading to reduced storage efficiency.

Symptoms of a bad Lower Crisper Pan include:

• Visible cracks or damage to the pan
• Difficulty sliding the pan in and out
• Produce not staying fresh as long due to improper humidity control

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This front shelf trim replaces a cracked, chipped or missing trim piece to restore the shelf edge and help keep items from sliding off. Durable trim snaps into the shelf front for a clean, finished look. What it does

• Replaces damaged or missing front shelf trim to restore the shelf edge
• Helps keep items from sliding forward off the shelf
• Restores a finished appearance to the shelf front
• Works with the corresponding shelf assembly to maintain proper fit

• Remove food and shelves before installing; handle glass shelves with care
• Trim typically snaps or screws into the shelf front—align and press until it seats
• Use basic hand tools if fasteners are present; do not force parts to avoid breakage

This replacement glass insert fits into the crisper cover frame to create a sturdy, easy to clean surface above your produce drawers. Replace a cracked or missing insert to restore safe storage and proper drawer support.

• Sits in the crisper cover frame to support items above the drawers
• Helps contain spills to protect the drawers below
• Maintains correct spacing so crisper drawers open and close smoothly
• Replace when the original glass is cracked, chipped, shattered, or missing

• Unload the shelf and remove the crisper drawers
• Lift out the crisper cover frame and place it on a flat surface
• Remove the damaged glass and set the new insert into the frame recess without forcing
• Reinstall the cover and drawers; wear cut-resistant gloves and handle glass carefully

This refrigerator pan cover insert sits in the frame above a storage drawer to create a flat, sturdy shelf surface. Replace a cracked, missing, or loose insert to restore support and help drawers slide and seal properly. What it does:

• Fits into the pan cover frame to form a flat surface above the drawer
• Supports food items while covering the drawer below
• Helps contain spills and prevents items from falling into the drawer
• Common symptoms: cracked/broken insert, sagging shelf, spills leaking into drawer, drawer catching

• 1 pan cover insert

• Remove food, slide out the drawer, and lift out the cover/frame for access
• If working near lights or controls, disconnect power; wear cut-resistant gloves when handling edges
• Clean the frame channels and align the insert with orientation tabs/grooves
• Lower the insert gently and ensure it sits flush—do not force into place

This Glass Shelf Inset is an OEM replacement part for Frigidaire refrigerators. Crafted from durable transparent glass, this shelf creates an enclosed area optimized for storing fruits and vegetables in the upper fridge compartment.

Causes of a damaged glass shelf insert can include chips or cracks developing from impact or excessive weight loads over time.

Symptoms of an inadequate upper crisper pan include:

• Leaks or moisture inside upper refrigerator shelves
• Blocked visibility of produce and food items
• Inability to properly store hydrated fruits and veggies
• Products drying out or spoiling faster without humidity control

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, and Kelvinator.

This sliding basket replaces a damaged or missing freezer drawer basket to restore organized, pull-out storage and easier access to frozen items. It provides stable support for stored food and helps keep contents contained while sliding. What it does:

• Provides pull-out storage and organization for frozen foods.
• Restores drawer function when the original basket is cracked, broken, missing, or catches.
• Keeps items contained and easier to reach than loose stacking on shelves.
• Improves visibility and access to stored frozen goods.

• Always unplug the appliance and remove food/ice before starting any repair.
• Remove the old basket per the appliance service instructions and slide the replacement into the existing rails.
• Basic hand tools may be needed; retain original clips or fasteners if present.
• Verify fit by part number and appliance model before installation.

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement meat pan is the oven broiler/drip pan that catches drippings and supports roasts and other meats while cooking. It helps contain spills and reduces mess for easier cleanup and safer broiling. What it does

• Catches grease and drippings to protect the oven floor and prevent smoking or flare-ups.
• Supports roasts and broiled foods for even exposure to heat.
• Helps contain juices for easier cleanup after cooking.
• Replace if pan is warped, cracked, heavily corroded, or missing, which can cause uneven cooking or excess smoke.

• Allow the oven to fully cool before removing or installing the pan; use oven mitts or gloves to avoid cuts.
• Usually installs by sliding into oven broiler shelf/support; no tools typically required.
• Clean with non-abrasive cleaners to preserve finish; avoid harsh scrubbing that can damage the surface.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This refrigerator water tank (reservoir) stores and chills drinking water inside the fresh food compartment, helping deliver a steady, reliable stream to the dispenser. Replace a cracked or leaking tank to stop interior leaks and restore dispenser performance.

• Stores a small volume of drinking water so it's cooled before dispensing
• Helps maintain consistent dispenser flow by buffering line pressure
• A cracked tank can leak water inside the fresh food section, often under the crisper drawers
• A restricted or frozen tank can cause little or no water, or sputtering, from the dispenser

• Unplug the refrigerator and shut off the household water supply; depressurize by dispensing water
• Access the tank, typically behind the lower crisper drawers in the fresh food section; place towels to catch residual water
• Reconnect existing water lines using push-to-connect fittings; cut tubing square and fully seat it
• Restore water and power, check for leaks at all connections, and flush the water system thoroughly

This cover shields internal components and gives the appliance a finished appearance while preventing debris from entering sensitive areas. It restores a clean look and helps keep wiring and mechanics protected. What it does:

• Protects internal parts from dust, dirt and accidental contact
• Secures and conceals wiring, connectors and small components
• Helps stop rattles or vibration-related noise when intact
• Restores finished appearance after damage or loss

• Disconnect power to the appliance before starting any work
• Remove any retaining screws or clips to access and replace the cover
• Handle carefully to avoid damaging mounting tabs or clips

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

This ice cream shelf replaces a cracked, damaged, or missing freezer door shelf to restore convenient storage for tubs and small containers. Durable molded plastic matches the original fit and helps keep frozen goods organized. What it does:

• Provides a dedicated shelf area on the freezer door for ice cream tubs and small frozen items
• Replaces broken, cracked, warped, or missing shelves that no longer hold containers securely
• Restores proper spacing and organization in the freezer door to prevent items from falling
• Matches OEM fit and mounting points for a direct replacement

• Remove all food and empty the door area before installing
• Inspect mounting tabs/rails for damage; replace any broken clips separately
• Align shelf tabs with door slots and press into place until fully seated
• Use caution to avoid pinching; wear gloves if edges are cold or sharp

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This return air seal keeps refrigerator airflow channels sealed so cold air returns to the evaporator properly, helping maintain consistent temperatures and reduce frost and moisture issues. It replaces a worn or damaged return-air gasket. What it does

• Seals the return-air opening to direct cold air back to the evaporator
• Helps maintain even cooling and prevents warm air infiltration
• Reduces frost, moisture buildup, and uneven temperature zones
• Commonly replaced when you notice poor cooling, excessive frost, or air leakage noises

• One return air seal

• Disconnect power before starting work
• Remove any trim or panels that block access to the return-air opening
• Seat the seal into the channel or mating surface; some installations use adhesive or retainers—follow the manufacturer's instructions

This small clip secures the crisper cover's slide so it stays aligned and operates smoothly. Replacing a broken or missing clip restores proper slide action and helps keep your crisper cover assembly functioning as designed.

• Holds the crisper cover slide in place and aligned with its track
• Helps the slide move smoothly without popping off or binding
• Common symptoms: slide is loose or falls out, won't stay in place, cracked/missing clip
• Visual damage or loss can leave the crisper drawer cover slide inoperable

• Disconnect power and remove food items for safe access
• Remove the crisper drawer and lift out the crisper cover assembly
• Release the damaged clip and snap the new clip into the cover/slide as oriented
• Reassemble and verify the slide moves freely end to end

This clip mounts to the refrigerator liner and secures the crisper cover/slide rail so the drawer stays supported and glides properly. Replace a broken or missing clip to restore alignment and smooth operation of the crisper.

• Holds the crisper cover/slide rail firmly against the cabinet liner
• Supports the crisper drawer to prevent sagging or tilt
• Helps restore smooth opening and closing of the crisper drawer
• Common symptoms of failure: loose rail, drawer off-track, difficulty sliding, or a cracked/missing clip

• Unplug the refrigerator or disconnect power before servicing
• Remove the crisper drawer and cover/glass to access the clip
• Release the old clip (snap tabs or screw), align and secure the new clip; reuse the original fastener if your model uses one
• Reinstall the cover and drawer; the drawer slides freely