Parts for Frigidaire FPHT2097VF3: Shelves Parts

This shelf assembly is the refrigerator glass shelf that supports food and containers while keeping items visible and stable. It replaces a cracked, chipped, or broken shelf to restore usable storage space and a clean interior look. What it does:

• Provides a flat, sturdy surface for storing food, beverages, and containers
• Restores a damaged or missing shelf to prevent spills and improve organization
• Fits into the shelf tracks/runs to sit securely and support typical refrigerator loads
• Helps maintain even airflow around stored items when positioned per OEM layout

• Remove food and unplug refrigerator or turn off power at the breaker before installing
• Slide old shelf out of the shelf supports and position replacement into the same guides
• Handle glass carefully and use two hands to avoid dropping; wear safety gloves if preferred
• Ensure clips or trim snap into place and that shelf sits level before restoring use

This shelf assembly replaces a damaged or missing glass shelf in the refrigerator to restore stable storage and organized food placement. Designed to support containers and help keep interior items accessible and level. What it does

• Provides a sturdy, flat surface for storing food and containers inside the refrigerator
• Replaces cracked, chipped, or sagging shelves that cause instability or unsafe storage
• Helps keep interior items organized and prevents spills from lower shelves
• Fits into existing shelf tracks or supports to restore proper shelf spacing

• One complete shelf assembly

• Slide the shelf into the existing tracks or support slots until fully seated; do not force
• Handle glass parts carefully and wear gloves to reduce cut risk during installation
• If any clips or supports are damaged, replace them before use to ensure secure mounting
• Disconnect power only if installation requires moving shelves near electrical controls; otherwise power disconnection is not typically necessary

This carriage is a guide/support component that keeps a moving assembly aligned inside your appliance. Replacing a worn or cracked carriage restores smooth movement and proper engagement so doors, drawers, or mechanisms operate as intended.

• Guides and supports the connected mechanism for smooth, aligned travel
• Maintains correct positioning so parts engage or latch properly
• Helps prevent binding, scraping, and uneven wear
• Common symptoms of failure: cracked or broken housing, looseness or wobble, hard-to-open/close or adjust, scraping/clicking noises

• Disconnect power (and any gas/water connections, if applicable) before servicing
• Use your model's parts diagram to locate mounting points and orientation
• Transfer any reusable screws, clips, or brackets from the original part
• After installation, verify alignment and smooth operation before returning to service

This replacement crisper drawer provides a secure, moisture-controlled bin for storing fruits and vegetables so they stay organized and accessible. Fits in compatible refrigerators where the original drawer is cracked, chipped, or missing. What it does:

• Holds and organizes fresh produce and deli items in the refrigerator compartment
• Works with the refrigerator's humidity control to help preserve produce longer
• Replaces drawers that are cracked, warped, or no longer sliding smoothly
• Restores proper fit and alignment on the drawer rails or glides

• One replacement crisper drawer

• Slide the damaged drawer out, lift to disengage from the rails, and install the new drawer by aligning and lowering onto the guides
• No special tools typically required; use a soft cloth to avoid scratching the finish
• Inspect drawer rails and glides for damage before installing; replace worn rails if the drawer does not seat properly
• Disconnect power only if required for access; follow all safety precautions in your refrigerator owner's manual

This cover assembly replaces a damaged outer housing panel to protect internal components and restore the appliance's proper fit and appearance. It helps keep wiring and mechanisms enclosed for safer operation. What it does:

• Covers and protects internal electrical and mechanical parts from debris and accidental contact
• Restores proper alignment and panel fit to reduce vibration and rattling
• Helps maintain appliance appearance by replacing cracked, warped, or broken exterior panels
• Suitable when the existing cover is bent, cracked, or missing fasteners

• Disconnect power (unplug or switch off breaker) before removing panels or working near wiring
• Use basic hand tools; support the appliance and parts during removal to avoid damage
• Keep fasteners and clips organized for reassembly; replace any damaged clips separately

The Crisper Pan is an OEM part compatible with Frigidaire refrigerators. It is designed to provide a dedicated storage space for fruits and vegetables, helping to keep them fresh for longer periods.

A bad crisper pan can be caused by wear and tear, damage, or improper cleaning. When the crisper pan becomes faulty, it can result in issues such as improper humidity control, inadequate ventilation, or mold growth.

Symptoms of a bad crisper pan include:

• Excessive moisture or condensation in the crisper drawer
• Mold growth on produce or inside the drawer
• Rapid spoilage or wilting of fruits and vegetables

Replace your faulty crisper pan with this genuine OEM Frigidaire part to preserve the quality of your produce. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Crisper Pan is an OEM part for Frigidaire refrigerators. It is designed to provide a dedicated storage space for fruits and vegetables, helping to keep them fresh for longer periods.

A bad crisper pan can be caused by wear and tear, damage, or improper cleaning. When the crisper pan becomes faulty, it can result in issues such as improper humidity control, inadequate ventilation, or mold growth.

Symptoms of a bad crisper pan include:

• Excessive moisture or condensation in the crisper drawer
• Mold growth on produce or inside the drawer
• Rapid spoilage or wilting of fruits and vegetables

Replace your faulty crisper pan with this genuine OEM Frigidaire part to preserve the quality of your produce. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This support is a replacement mounting bracket that helps secure internal components for stable operation and proper alignment. It restores fit and prevents movement that can cause noise or wear. What it does:

• Provides structural support for internal appliance parts and assemblies
• Keeps panels and components aligned to reduce rattling or vibration
• Helps maintain door/drawer stability and smooth operation
• Prevents excessive movement that can lead to premature wear

• Inspect surrounding parts and fasteners; replace any damaged hardware for a secure fit
• Use basic hand tools; follow the appliance's service manual for access and disassembly
• Disconnect power (and water supply if applicable) before starting work

Keep your fridge smelling fresh with this PureAir AF-1 refrigerator air filter. It reduces common food odors as air circulates through the compartment, helping maintain a cleaner, fresher interior when replaced at the interval your model recommends.

• Filters recirculating air in the fresh food compartment to reduce lingering odors
• Helps limit odor transfer between foods
• For refrigerators equipped with the PureAir AF-1 air filter housing
• Replace when the filter indicator prompts or when odors persist

• Locate the air filter housing inside the fresh food section; refer to your owner's manual for the exact location and orientation
• Open the cover, remove the used filter, and insert the new filter fully seated
• Close the cover and reset the air filter reminder/indicator, if your model has one
• If working near internal fans or wiring, disconnect power for safety

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This UI board and overlay kit replaces the control panel electronics and front membrane to restore button response and on-screen feedback. It provides a matched board and keypad surface for straightforward control repairs. What it does:

• Replaces the user interface electronics that register button presses and drive the display
• Restores unresponsive or erratic touch/button behavior
• Helps address missing or garbled display segments tied to the control board
• Works as the matched overlay and circuit assembly for consistent feel and function

• Disconnect all power to the appliance before starting any service to avoid shock.
• Handle the circuit board carefully; avoid static discharge and excessive force on connectors.
• Test the control functions after re-assembly and before finalizing installation.

This UI board and overlay kit replaces the control panel electronics and front membrane to restore button response and on-screen feedback. It provides a matched board and keypad surface for straightforward control repairs. What it does:

• Replaces the user interface electronics that register button presses and drive the display
• Restores unresponsive or erratic touch/button behavior
• Helps address missing or garbled display segments tied to the control board
• Works as the matched overlay and circuit assembly for consistent feel and function

• Disconnect all power to the appliance before starting any service to avoid shock.
• Handle the circuit board carefully; avoid static discharge and excessive force on connectors.
• Test the control functions after re-assembly and before finalizing installation.

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location