Parts for Frigidaire FRS22PRCD3: 05 - Shelves Parts

This basket trim is the replacement edge trim that snaps onto the dishwasher rack to protect dishes and prevent wear along the rack perimeter. It restores a smooth edge and helps keep items from catching or chipping. What it does:

• Covers and protects the exposed metal edge of the dishwasher basket/rack.
• Helps prevent dishes and glassware from chipping or snagging on a rough rack edge.
• Restores a finished appearance to a damaged or missing rack trim.
• Reduces contact noise and wear where dishes meet the rack perimeter.

• Disconnect power to the appliance before beginning any repair work.
• This part typically snaps onto the rack edge; remove the rack for easier access.
• Replace any broken clips or adjacent trim sections to ensure a secure fit.
• If plastic is brittle or rack is heavily corroded, consider replacing adjacent components rather than forcing installation.

Optional flexible ice tray for those that dont have an icemaker

The Upper Crisper Pan is an OEM replacement part for Frigidaire refrigerators. Located on the slidable tracks inside fresh food section that holds the vegetables/produce. The pan measures about 16-1/2 inches wide by 8 inches high by 16 inches deep. The drawer front is not included for lower pan order 5303289501.

Causes of a bad upper crisper pan may be cracks in plastic developing over extended use, stains that render it unsuitable for food contact, or warping from exposure to wet environments inside the crisper.

Symptoms of a bad upper crisper pan include:

• Leaks and stains below the drawer from collected liquids overflowing the pan
• Difficulty organizing and separating different items stored in the crisper

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Lower Storage Pan is an OEM part for Frigidaire refrigerators. This storage pan is designed to fit in the lower section of the refrigerator, providing an ideal space for storing fresh produce, meats, and other perishable items. Drawer front not included. For upper pan order 5303289500.

Over time, the lower storage pan can become damaged due to regular use, overloading, or accidental impacts. Cracks, breaks, or warping can compromise its functionality and lead to issues with storing items properly.

Symptoms of a bad Lower Storage Pan include:

• Cracks or visible damage to the pan
• Difficulty sliding the pan in and out of its compartment
• Items not being held securely within the pan
• Pan not fitting correctly in its designated space

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Protector Cap is an OEM part for Frigidaire refrigerators. It is designed to shield and protect specific components within the refrigerator, such as the temperature sensor or wiring connections. This cap helps to ensure that these critical parts remain intact and functional, contributing to the overall efficiency and performance of the appliance.

 A compromised protector cap can expose sensitive components to potential damage, leading to malfunctions and decreased refrigerator efficiency.

Symptoms of a bad protector cap include:

• Visible cracks or damage to the cap
• Loose or missing cap
• Exposed or damaged wiring or sensors

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement ice container catches and stores ice produced by the freezer ice maker so loose cubes stay contained and easy to access. Restores proper ice collection and organization in the freezer compartment. What it does:

• Collects and holds ice dispensed from the ice maker so cubes don't scatter inside the freezer
• Keeps ice organized and accessible for removal or serving
• Prevents ice from blocking the dispenser chute or falling onto shelves
• Helps maintain a cleaner freezer interior by containing drips and loose cubes

• Disconnect power to the appliance before starting any work
• Remove existing ice and, the ice maker assembly per appliance access procedure to free the container
• Slide the container into the ice bin tracks or seat it in the freezer compartment until it clicks or seats firmly
• Wash the new container in warm, soapy water and dry thoroughly before first use; avoid abrasive cleaners

This storage pan front is the replacement drawer front that restores the look and function of a refrigerator storage bin, keeping contents contained and helping drawers open and close smoothly. Designed to match OEM fit and finish. What it does:

• Replaces a cracked, chipped or broken drawer/front that won't stay attached
• Keeps stored food and produce contained in the lower storage bin
• Restores proper alignment so the drawer slides and seals correctly
• Prevents items from falling out when opening or closing the drawer

• One storage pan front (single piece) as shown

• Remove contents and the full drawer/bin before replacing the front to avoid damage
• Most replacements snap or slide into existing tracks; no special tools required for many models
• Handle part carefully to avoid scratching; wear gloves if needed to protect hands
• Ensure proper seating before use

Glass

Size: Approx. 16.31 inches X 17.32 inches. This is clear glass

This is a factory-style replacement screw used to secure appliance components. It restores proper fastening where the original screw is missing, stripped, or damaged so panels and assemblies stay firmly attached. What it does:

• Fastens panels, brackets, or components to the appliance frame or assemblies
• Replaces missing or damaged mounting hardware that can cause rattles or loose parts
• Provides the correct fit and thread engagement for a secure connection
• Helps maintain appliance alignment and safe operation

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread or part damage
• Turn off power and remove any access panels before working on electrical components

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

Left hand side. For the right hand side order 218015601

Right hand side. For the left hand side order 218015501

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required