Parts for Frigidaire FRSC2333AS5: Shelves Parts

This genuine replacement glass shelf restores stable storage space in your refrigerator, giving a flat, easy-to-clean surface for food and containers. It helps keep items organized and prevents spills from reaching lower compartments. What it does:

• Provides a sturdy, level platform for storing food, dishes and containers
• Contains minor spills on the shelf surface for easier cleanup
• Replaces cracked, chipped or missing shelves that limit usable storage
• Fits into factory shelf supports to maintain proper airflow and organization

• One replacement glass refrigerator shelf

• Handle glass carefully and support from beneath during installation
• Install into existing shelf supports or clips; no special tools typically required
• If damaged or chipped, replace immediately to avoid injury
• Disconnect power and remove food from the area if working near illuminated or chilled compartments for safety

Restore stable, level storage with this replacement refrigerator shelf. It replaces a broken or missing shelf to bring back original capacity and keep food organized and easy to access.

• Provides a flat, sturdy surface for food storage inside the compartment
• Locks into the side rails/pegs to stay secure and level
• Replace if cracked, bowed, or unable to stay seated
• Common symptoms: shelf broken or missing, items tip or spill, reduced storage space

• Remove items and the damaged shelf before installation
• Inspect and clean the support rails; align and slide the new shelf into place
• Ensure tabs are fully engaged and the shelf sits level before loading
• Wear cut-resistant gloves and avoid forcing the shelf into position

This freezer shelf provides a sturdy, level surface for organizing food in the freezer compartment. Replace a broken, bowed, or missing shelf to restore storage capacity and keep containers stable, accessible, and out of the air vents.

• Provides a flat, stable surface for food storage in the freezer
• Replaces cracked, warped, or missing shelf that won't sit level
• Helps maintain organization and efficient airflow
• Seats securely in the factory side supports when properly installed

• Disconnect power before servicing; remove food from the work area
• Lift the front edge and pull out to release the old shelf from the side supports
• Align the new shelf with the support rails; push back until fully seated and level
• Load food evenly and avoid overloading the shelf

This door trim restores a clean, finished edge to the appliance door and improves appearance while covering the mounting area. It replaces damaged, cracked or missing trim to help the door seal and look right again. What it does

• Covers and protects the door edge and screw holes for a finished appearance
• Replaces cracked, warped or missing trim that can catch or snag
• Helps maintain proper fit and alignment at the door edge
• Reduces drafts and exposure of internal components around the door perimeter

• One replacement door trim piece

• Disconnect power and empty the door area before starting any repair
• Installation typically requires removing fasteners and snapping or sliding the trim into place; keep existing screws and clips if reusable
• Handle trim carefully to avoid scratching the finish; wear gloves to protect hands

Replacement trim that restores the finished edge around a refrigerator door and helps keep adjacent panels aligned for a clean, factory look. Use this trim when the original piece is cracked, warped, or missing. What it does:

• Covers and protects the door edge and hides fasteners for a finished appearance
• Helps maintain proper panel alignment and fit between door sections
• Replacing damaged trim prevents cosmetic gaps and reduces risk of snagging on clothes
• Matches original mounting locations so panels and seals sit correctly

• Disconnect power and empty or support the door/panel before removing trim
• Remove retaining screws/clips carefully; keep hardware if reusing
• Handle edges carefully to avoid injury or damage to surrounding finishes

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This small plastic retainer clip secures interior trim and components so panels and shelves stay aligned and rattle-free. A direct-fit replacement that restores proper mounting where the original clip is broken or missing. What it does

• Holds interior trim, liners or lightweight panels in place to prevent gaps or movement.
• Stops rattling or vibration caused by a loose or damaged retainer.
• Restores secure mounting after a broken or missing clip.
• Works where a snap-in or press-fit fastener is required.

• Disconnect power to the appliance before beginning any repairs to avoid electrical hazards.
• Access the clip location by removing the affected trim or panel per your model's service instructions.
• Clip typically snaps into a hole or slot; press firmly until it seats. Small pliers may help for removal/installation.
• If mounting area is damaged, inspect surrounding parts and replace as needed for a secure fit.

This replacement glass shelf assembly restores a flat, stable surface inside the refrigerator so food and containers sit level and the shelves organize correctly. It fits into existing support rails and provides a durable storage surface. What it does:

• Provides a sturdy, level shelf surface for holding food, containers and small appliances
• Replaces cracked, chipped or sagging glass shelves that allow items to slide or fall
• Restores proper spacing and organization inside the refrigerator compartment
• Helps maintain even airflow and prevents items from blocking vents when installed correctly

• Remove food and store perishable items before replacing the shelf.
• Lift the old shelf straight up from the support rails, then lower the new shelf into place; avoid twisting glass.
• Wear gloves and handle glass carefully to prevent cuts or breakage.
• If shelf support rails are damaged, replace supports before installing the shelf.

A replacement crisper cover shelf that restores a flat, stable surface over the refrigerator crisper drawer so produce and other items sit securely and spills are contained. Fits original mount points for a direct swap. What it does:

• Provides a stable shelf over the crisper drawer so items won't drop into the drawer
• Helps contain spills and makes cleanup easier
• Restores proper spacing for items stored above the crisper
• Replaces cracked, chipped, or missing covers that can interfere with drawer operation

• Empty the area and remove any loose items from the crisper and surrounding shelves before installing
• Slide or seat the cover into the existing shelf rails or mounting slots; ensure it's fully engaged on both sides
• Handle carefully to avoid dropping or chipping; wear gloves if needed
• If broken glass is present, remove shards safely and clean the area before installing the new cover

A clear replacement deli cover that protects deli drawers and helps keep sliced meats and cheeses fresh by blocking contaminants and reducing odor transfer. Fits in the deli compartment and restores proper separation of foods. What it does

• Replaces a cracked, broken, cloudy, or missing deli cover so foods stay contained and separated
• Helps limit cross-contamination and reduces odors between drawer items
• Restores the original fit and function of the deli compartment to help maintain organized storage
• Visible, transparent design makes it easy to identify contents without removing the cover

• One deli cover

• Simple drop-in replacement; typically requires no tools — lift out the old cover and set the new cover in place
• Clean with warm, soapy water and a soft cloth before first use; avoid abrasive cleaners or scouring pads
• Handle gently to avoid cracks or chips during installation

This crisper pan is the removable drawer that holds fruits and vegetables and helps contain spills in the lower section of the refrigerator. It restores storage capacity and keeps produce organized. What it does:

• Provides a stable, easy-to-clean surface for produce and bulk items
• Helps contain moisture and spills to protect refrigerator interior
• Restores proper drawer fit and sliding operation when the original pan is cracked or missing
• Fits into the crisper housing to support the crisper cover and drawer assembly

• One crisper pan

• Slide out and remove the crisper drawer and cover before lifting the pan into place
• Handle glass or plastic panels carefully to avoid chips or cracks; wear gloves if needed
• No tools typically required; reinstall drawer and ensure smooth operation
• If you smell persistent odors or see leaks after install, check adjacent seals and drawers for damage

This crisper pan is the replacement drawer pan that supports and contains your refrigerator's produce drawers, helping keep fruits and vegetables organized and contained. It restores a clean, stable surface for your crisper drawer to slide on. What it does:

• Provides the support surface for the refrigerator crisper drawer so it slides and stores produce correctly
• Contains spills and moisture that collect in the drawer area to help protect interior surfaces
• Replaces cracked, warped, or broken pans that can cause drawers to stick, tip, or leak
• Helps maintain an organized produce area so drawers close and operate smoothly

• Remove food and the drawer before replacing the pan; follow your refrigerator's owner manual for safe removal
• Slide the pan into the existing tracks until it seats; do not force if it catches—inspect tracks for debris or damage
• Handle carefully to avoid cracks; use OEM part number when ordering to ensure correct fit
• Clean with mild detergent and water; avoid abrasive cleaners or high-heat drying

Keep frozen foods organized and easy to access with this wire freezer basket. It restores storage space and helps prevent items from shifting so you can find what you need faster. What it does:

• Holds and organizes loose frozen items in the freezer compartment
• Prevents small packages from falling behind shelves or into gaps
• Improves visibility and access to frequently used items
• Stops baskets or contents from sliding and rattling during door movement

• Remove all items from the freezer area before installing
• Slide the basket into the existing tracks or brackets until it seats securely
• Inspect mounting clips or rails for damage and replace if worn
• No specialized tools required; for model-specific guidance

This hanger-shelf glass is the replacement glass shelf that mounts to the refrigerator door, restoring a secure, flat surface for storing bottles and containers. Replaces cracked or chipped door shelf glass to help keep items stable. What it does

• Provides a sturdy, flat shelf surface for door storage.
• Hangs into the door rail to support bottles, jars, and deli items.
• Restores a broken or chipped door shelf so items no longer shift or fall.
• Matches OEM fit and mounting style for a clean, stable installation.

• Remove food and any loose items from the door before replacing the shelf.
• Handle carefully and wear cut-resistant gloves; glass edges may be sharp.
• Align the shelf hangers with the door rails and slide into place until fully seated.
• If mounting clips or supports were damaged, replace them before installing the new glass.

This hanger-shelf glass is the replacement glass support used to hold and stabilize a refrigerator shelf. It restores a secure, level surface for stored items and replaces cracked or missing shelf supports. What it does:

• Supports and secures the refrigerator glass shelf to its hanger/rail
• Keeps the shelf level to prevent stored items from sliding or tipping
• Replaces broken, cracked or worn hanger supports that cause shelf instability
• Helps restore proper shelf alignment and safe storage inside the compartment

• One hanger-shelf glass replacement

• Handle glass carefully and wear cut-resistant gloves to avoid injury
• Remove shelf contents and the damaged shelf before installing the replacement
• Follow the appliance manufacturer's instructions for re-seating the glass into the hanger/rails

This hanger is a replacement mounting bracket that secures the appliance component in place, restoring proper alignment and support to prevent sagging or misalignment. It's a simple, durable fix for worn or broken mounting points. What it does:

• Provides a secure mounting point to hold the panel or assembly in correct position
• Restores proper alignment to eliminate rubbing, sagging, or uneven gaps
• Replaces cracked, bent, or missing hangers that cause noisy or unstable operation
• Durable molded/metal construction resists everyday wear

• One hanger

• Turn power off or unplug the appliance before beginning any repair
• Confirm hanger orientation and fastener locations before removing the old part
• Use appropriate hand tools; avoid over-tightening screws which can crack the hanger or surrounding plastic

This replacement deli pan is the removable plastic insert that holds deli items in the refrigerator deli drawer, keeping foods contained and easy to access. Restores proper storage and organization in the deli compartment. What it does:

• Provides a dedicated tray for deli meats, cheeses, and prepared foods to keep the drawer clean and organized
• Replaces cracked, warped, or stained deli drawer inserts that no longer sit or seal properly
• Helps contain spills and crumbs for easier cleanup
• Fits into the deli drawer track or opening to restore intended storage function

• One deli pan (single replacement insert)

• Remove all food and slide out the deli drawer to access the pan before installing
• Lift or slide the old pan out of the drawer track and set the new pan into the same position until it seats
• Clean with mild detergent and avoid abrasive pads or harsh chemicals that can scratch or cloud the plastic
• If the pan does not seat easily, check for obstructions and align with the drawer guides; do not force

This refrigerator water tube carries fresh water between the valve, reservoir, dispenser, and/or ice maker. Replacing a cracked or kinked tube restores proper water flow and helps stop leaks inside or behind the refrigerator.

• Directs pressurized water between components in the refrigerator's water system
• Common failure signs: leaks, visible cracking, kinks, or pinhole sprays
• May cause no or slow dispenser flow, or an ice maker that doesn't fill
• Restores correct routing after tubing becomes brittle or damaged with age

• Unplug the refrigerator and shut off the household water supply before servicing
• Place a towel under connections and dispense water to relieve line pressure
• Depress quick-connect collars or loosen clamps to remove the old tube; route the new tube exactly like the original
• Fully seat tubing in fittings, perform a gentle tug test, restore water, check for leaks, and flush several cups to clear air

A single replacement screw used to secure appliance panels, brackets, or small components — restores proper fastening and reduces noise from loose parts. Simple, direct replacement when an original screw is missing or damaged. What it does:

• Fastens panels, trim, brackets or internal components to keep parts aligned and secure.
• Stops rattling, vibration or loose-panel movement caused by a missing or stripped screw.
• Provides the correct fit when replacing a lost or damaged original fastener.
• Intended for use where the OEM screw specification matches the appliance requirement.

• Disconnect power or unplug the appliance before accessing internal parts to avoid shock or injury.
• Use the correct screwdriver or bit to avoid stripping the head; hand-start threads before final tightening.
• Tighten until snug—do not overtighten, which can strip threads or crack plastic panels.
• Replace with an identical screw (head style, length, and thread) for proper fit and safety.

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

This water connector links sections of the refrigerator's water supply tubing, maintaining a sealed path to the dispenser and ice maker. Replace a cracked or leaking connector to stop drips and restore reliable water flow and ice production.

• Connects sections of internal water tubing between components (inlet valve, filter, door, ice maker)
• Helps maintain a sealed route for proper dispenser and ice maker operation
• Common symptoms: water leaking behind/under the refrigerator, weak/no dispenser flow, ice maker not filling, visible damage at the fitting
• Direct-fit component built to OEM specifications for the intended application

• Unplug the refrigerator and shut off the household water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Cut tubing ends square and fully insert into the connector until seated; tug gently to confirm engagement
• Restore water, check carefully for leaks, and recheck after the first dispense cycle