Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a replacement screw for chainsaws. This screw attaches the cylinder shield to the main body of the chainsaw. Over time and with regular use, the screw can become loose or damaged. This causes the cylinder shield to become loose as well, which could lead to the entire chainsaw falling apart during use. A loose cylinder shield exposes the engine to the elements and can cause damage to the engine and the chainsaw's performance.Check the screw to see if it should be replaced by trying to move the cylinder shield. If it stays firm, then the screw is fine. If you feel any looseness or resistance, the screw will need to be replaced as soon as possible. Check the screws for wear and tear frequently.This is a genuine OEM part sourced from the manufacturer, and it is a size T-25 Torx screw. The screw can be installed with a screwdriver, and the installation process should not take too long. Remember to always be careful around a chainsaw's blade, even for this simple repair.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
The air filter in a chainsaw is located right between the intake and the carburetor and is responsible for cleaning the air as it enters the carburetor. Over time and with regular use, the air filter may be clogged with debris and buildup. Therefore, they should be replaced regularly as a part of routine maintenance, or whenever equipment isn’t running as it should. It’s also a good idea to have an extra filter on hand. Let the engine cool completely before replacing the air filter to reduce the risk of burns. Ensure that the saw is off and not at risk of engaging, and use gloves to perform the replacement. This air filter is made by Husqvarna and is designed to work with select Craftsman, Poulan, and Poulan Pro chainsaw models. It is a genuine OEM part and is sold as a single filter. Check the manual for compatibility and part numbers to ensure an exact fit.
The carburetor is responsible for mixing the air and fuel before it enters the engine. It consists of intake and outflow valves, as well as a float and needle to monitor and manage the flow of fuel and air coming into and leaving the carburetor body. The fuel mixes with oil in the smallest part of the body and is then pushed through a butterfly valve into the engine. Adjusting the valve will adjust how much of the fuel mixture gets into the engine. In the event that an engine is not running or keeps stalling, the carburetor may need of repair or replacement. This kit is designed to assist with the repair or refurbishment of several carburetors in various chainsaws. It is a full carburetor, not a rebuild kit. Installation will require a screwdriver to replace the carburetor. This OEM carburetor assembly kit is compatible with a number of chainsaws from Husqvarna. The kite includes the carburetor body, along with the float, needle, gaskets, and seals that are all made to manufacturer standards, offering an exact fit for compatible models.
The carburetor gasket helps to form a seal between the carburetor and the carburetor adapter. It will ensure there are no leaks and that air does not pass through the connection. If there are performance issues or leakage near the carburetor, the culprit could be the carburetor gasket. Additionally, whenever a carburetor is replaced, this gasket must also be replaced. This is because there is a chance that a reused gasket will not reseal properly. If the reused gasket or the new gasket is not installed and seated properly, there is a chance that it could let dirt into the engine. It could also let in extra air, which could lead to damage to the engine. It is important to properly maintain a chainsaw and to replace O-rings and gaskets whenever they show signs of wear and tear. This OEM part will work with a range of models, including Craftsman, Husqvarna, Poulan, and Poulan Pro. This is sold as an individual replacement part.
This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.
This piston ring is a genuine Husqvarna part, sold individually. This piston ring can be used as a replacement part for chainsaws. The function of the piston ring for a chainsaw is to keep the fuel economy and consumption of the chainsaw in check by sealing off the cylinder such that fuel does not leak out or in. A piston ring might have to be replaced within the standard lifespan of a chainsaw if it can no longer regulate the flow of fuel in and out of the chainsaw's engine. Symptoms of damage to a piston ring can include fuel leakages directly attributable to holes or cracks in the seal, black smoke pouring out of the exhaust, or reduced fuel economy. If any of these symptoms occur in a chainsaw, the piston ring should be evaluated and potentially removed in place of this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This piston ring is compatible with the following brands: Husqvarna, Craftsman, and Poulan.
This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.
This piston kit is a genuine MTD part, sold individually. This piston kit can be used as a replacement part in a chainsaw. The piston kit in a chainsaw comes with a variety of pistons in multiple sizes and shapes perfect for serving as a replacement part for one or more pistons that no longer function within the internal mechanisms of the appliance. The piston kit in a chainsaw might have to be ordered as a complete replacement part if one or more pistons ceases to serve its role. This could occur as a result of general wear and tear from long-term usage or due to a collision with a hard object such as a rock or a curb. If this occurs, the piston kit should be ordered as a genuine OEM replacement part and installed in accordance with the proper set of instructions sourced from a relevant manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This piston kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.